You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

486 lines
14 KiB

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
# Copyright (C) 2012-4 Michael D. Taht, Toke Høiland-Jørgensen, Sebastian Moeller
#improve the logread output
sqm_logger() {
logger -t SQM -s ${1}
}
insmod() {
lsmod | grep -q ^$1 || $INSMOD $1
}
ipt() {
d=`echo $* | sed s/-A/-D/g`
[ "$d" != "$*" ] && {
iptables $d > /dev/null 2>&1
ip6tables $d > /dev/null 2>&1
}
d=`echo $* | sed s/-I/-D/g`
[ "$d" != "$*" ] && {
iptables $d > /dev/null 2>&1
ip6tables $d > /dev/null 2>&1
}
iptables $* > /dev/null 2>&1
ip6tables $* > /dev/null 2>&1
}
do_modules() {
#sm TODO: check first whether the modules exist and only load then
insmod act_ipt
insmod sch_$QDISC
insmod sch_ingress
insmod act_mirred
insmod cls_fw
insmod sch_htb
}
# You need to jiggle these parameters. Note limits are tuned towards a <10Mbit uplink <60Mbup down
[ -z "$UPLINK" ] && UPLINK=2302
[ -z "$DOWNLINK" ] && DOWNLINK=14698
[ -z "$IFACE" ] && IFACE=ge00
[ -z "$QDISC" ] && QDISC=fq_codel
[ -z "$LLAM" ] && LLAM="tc_stab"
[ -z "$LINKLAYER" ] && LINKLAYER="none"
[ -z "$OVERHEAD" ] && OVERHEAD=0
[ -z "$STAB_MTU" ] && STAB_MTU=2047
[ -z "$STAB_MPU" ] && STAB_MPU=0
[ -z "$STAB_TSIZE" ] && STAB_TSIZE=512
[ -z "$AUTOFLOW" ] && AUTOFLOW=0
[ -z "$LIMIT" ] && LIMIT=1001 # sane global default for *LIMIT for fq_codel on a small memory device
[ -z "$ILIMIT" ] && ILIMIT=
[ -z "$ELIMIT" ] && ELIMIT=
[ -z "$ITARGET" ] && ITARGET=
[ -z "$ETARGET" ] && ETARGET=
[ -z "$IECN" ] && IECN="ECN"
[ -z "$EECN" ] && EECN="NOECN"
[ -z "$SQUASH_DSCP" ] && SQUASH_DSCP="1"
[ -z "$SQUASH_INGRESS" ] && SQUASH_INGRESS="1"
[ -z "$IQDISC_OPTS" ] && IQDISC_OPTS=""
[ -z "$EQDISC_OPTS" ] && EQDISC_OPTS=""
[ -z "$TC" ] && TC=`which tc`
#[ -z "$TC" ] && TC="sqm_logger tc"# this redirects all tc calls into the log
[ -z "$IP" ] && IP=$( which ip )
[ -z "$INSMOD" ] && INSMOD=`which insmod`
[ -z "$TARGET" ] && TARGET="5ms"
[ -z "$IPT_MASK" ] && IPT_MASK="0xff"
[ -z "$IPT_MASK_STRING" ] && IPT_MASK_STRING="/${IPT_MASK}" # for set-mark
#sqm_logger "${0} IPT_MASK: ${IPT_MASK_STRING}"
# find the ifb device associated with a specific interface, return nothing of no ifb is associated with IF
get_ifb_associated_with_if() {
CUR_IF=$1
# CUR_IFB=$( tc -p filter show parent ffff: dev ${CUR_IF} | grep -o -e ifb'[[:digit:]]\+' )
CUR_IFB=$( tc -p filter show parent ffff: dev ${CUR_IF} | grep -o -e ifb'[^)]\+' ) # my editor's syntax coloration is limitied so I need a single quote in this line (between eiditor and s)
sqm_logger "ifb associated with interface ${CUR_IF}: ${CUR_IFB}"
echo ${CUR_IFB}
}
# ATTENTION, IFB names can only be 15 chararcters, so we chop of excessive characters at the start of the interface name
# if required
create_new_ifb_for_if() {
CUR_IF=$1
MAX_IF_NAME_LENGTH=15
IFB_PREFIX="ifb4"
NEW_IFB="${IFB_PREFIX}${CUR_IF}"
IFB_NAME_LENGTH=${#NEW_IFB}
if [ ${IFB_NAME_LENGTH} -gt ${MAX_IF_NAME_LENGTH} ];
then
sqm_logger "The requsted IFB name ${NEW_IFB} is longer than the allowed 15 characters, trying to make it shorter"
OVERLIMIT=$(( ${#NEW_IFB} - ${MAX_IF_NAME_LENGTH} ))
NEW_IFB=${IFB_PREFIX}${CUR_IF:${OVERLIMIT}:$(( ${MAX_IF_NAME_LENGTH} - ${#IFB_PREFIX} ))}
fi
sqm_logger "trying to create new IFB: ${NEW_IFB}"
$IP link add name ${NEW_IFB} type ifb #>/dev/null 2>&1 # better be verbose
echo ${NEW_IFB}
}
# the best match is either the IFB already associated with the current interface or a new named IFB
get_ifb_for_if() {
CUR_IF=$1
# if an ifb is already associated return that
CUR_IFB=$( get_ifb_associated_with_if ${CUR_IF} )
[ -z "$CUR_IFB" ] && CUR_IFB=$( create_new_ifb_for_if ${CUR_IF} )
[ -z "$CUR_IFB" ] && sqm_logger "Could not find existing IFB for ${CUR_IF}, nor create a new IFB instead..."
echo ${CUR_IFB}
}
#sm: we need the functions above before trying to set the ingress IFB device
[ -z "$DEV" ] && DEV=$( get_ifb_for_if ${IFACE} ) # automagically get the right IFB device for the IFACE"
get_htb_adsll_string() {
ADSLL=""
if [ "$LLAM" = "htb_private" -a "$LINKLAYER" != "none" ];
then
# HTB defaults to MTU 1600 and an implicit fixed TSIZE of 256, but HTB as of around 3.10.0
# does not actually use a table in the kernel
ADSLL="mpu ${STAB_MPU} linklayer ${LINKLAYER} overhead ${OVERHEAD} mtu ${STAB_MTU}"
sqm_logger "ADSLL: ${ADSLL}"
fi
echo ${ADSLL}
}
get_stab_string() {
STABSTRING=""
if [ "${LLAM}" = "tc_stab" -a "$LINKLAYER" != "none" ];
then
STABSTRING="stab mtu ${STAB_MTU} tsize ${STAB_TSIZE} mpu ${STAB_MPU} overhead ${OVERHEAD} linklayer ${LINKLAYER}"
sqm_logger "STAB: ${STABSTRING}"
fi
echo ${STABSTRING}
}
sqm_stop() {
$TC qdisc del dev $IFACE ingress
$TC qdisc del dev $IFACE root
$TC qdisc del dev $DEV root
}
# Note this has side effects on the prio variable
# and depends on the interface global too
fc() {
$TC filter add dev $interface protocol ip parent $1 prio $prio u32 match ip tos $2 0xfc classid $3
prio=$(($prio + 1))
$TC filter add dev $interface protocol ipv6 parent $1 prio $prio u32 match ip6 priority $2 0xfc classid $3
prio=$(($prio + 1))
}
fc_pppoe() {
PPPOE_SESSION_ETHERTYPE="0x8864"
PPPOE_DISCOVERY_ETHERTYPE="0x8863"
PPP_PROTO_IP4="0x0021"
PPP_PROTO_IP6="0x0057"
ARP_PROTO_IP4="0x0806"
$TC filter add dev $interface protocol ip parent $1 prio $prio u32 match ip tos $2 0xfc classid $3
$TC filter add dev $interface parent $1 protocol ${PPPOE_SESSION_ETHERTYPE} prio $(( 400 + ${prio} )) u32 \
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
match u8 $2 0xfc at 9 \
flowid $3
prio=$(($prio + 1))
$TC filter add dev $interface protocol ipv6 parent $1 prio $prio u32 match ip6 priority $2 0xfc classid $3
$TC filter add dev $interface parent $1 protocol ${PPPOE_SESSION_ETHERTYPE} prio $(( 600 + ${prio} )) u32 \
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
match u16 0x0${2:2:2}0 0x0fc0 at 8 \
flowid $3
prio=$(($prio + 1))
}
# FIXME: actually you need to get the underlying MTU on PPOE thing
get_mtu() {
BW=$2
F=`cat /sys/class/net/$1/mtu`
if [ -z "$F" ]
then
F=1500
fi
if [ $BW -gt 20000 ]
then
F=$(($F * 2))
fi
if [ $BW -gt 30000 ]
then
F=$(($F * 2))
fi
if [ $BW -gt 40000 ]
then
F=$(($F * 2))
fi
if [ $BW -gt 50000 ]
then
F=$(($F * 2))
fi
if [ $BW -gt 60000 ]
then
F=$(($F * 2))
fi
if [ $BW -gt 80000 ]
then
F=$(($F * 2))
fi
echo $F
}
# FIXME should also calculate the limit
# Frankly I think Xfq_codel can pretty much always run with high numbers of flows
# now that it does fate sharing
# But right now I'm trying to match the ns2 model behavior better
# So SET the autoflow variable to 1 if you want the cablelabs behavior
get_flows() {
if [ "$AUTOFLOW" -eq "1" ]
then
FLOWS=8
[ $1 -gt 999 ] && FLOWS=16
[ $1 -gt 2999 ] && FLOWS=32
[ $1 -gt 7999 ] && FLOWS=48
[ $1 -gt 9999 ] && FLOWS=64
[ $1 -gt 19999 ] && FLOWS=128
[ $1 -gt 39999 ] && FLOWS=256
[ $1 -gt 69999 ] && FLOWS=512
[ $1 -gt 99999 ] && FLOWS=1024
case $QDISC in
codel|ns2_codel|pie|*fifo|pfifo_fast) ;;
fq_codel|*fq_codel|sfq) echo flows $FLOWS ;;
esac
fi
}
# set the target parameter, also try to only take well formed inputs
# Note, the link bandwidth in the current direction (ingress or egress)
# is required to adjust the target for slow links
get_target() {
local CUR_TARGET=${1}
local CUR_LINK_KBPS=${2}
[ ! -z "$CUR_TARGET" ] && sqm_logger "cur_target: ${CUR_TARGET} cur_bandwidth: ${CUR_LINK_KBPS}"
CUR_TARGET_STRING=
# either e.g. 100ms or auto
CUR_TARGET_VALUE=$( echo ${CUR_TARGET} | grep -o -e \^'[[:digit:]]\+' )
CUR_TARGET_UNIT=$( echo ${CUR_TARGET} | grep -o -e '[[:alpha:]]\+'\$ )
#[ ! -z "$CUR_TARGET" ] && sqm_logger "CUR_TARGET_VALUE: $CUR_TARGET_VALUE"
#[ ! -z "$CUR_TARGET" ] && sqm_logger "CUR_TARGET_UNIT: $CUR_TARGET_UNIT"
AUTO_TARGET=
UNIT_VALID=
case $QDISC in
*codel|*pie)
if [ ! -z "${CUR_TARGET_VALUE}" -a ! -z "${CUR_TARGET_UNIT}" ];
then
case ${CUR_TARGET_UNIT} in
# permissible units taken from: tc_util.c get_time()
s|sec|secs|ms|msec|msecs|us|usec|usecs)
CUR_TARGET_STRING="target ${CUR_TARGET_VALUE}${CUR_TARGET_UNIT}"
UNIT_VALID="1"
;;
esac
fi
# empty field in GUI or undefined GUI variable now defaults to auto
if [ -z "${CUR_TARGET_VALUE}" -a -z "${CUR_TARGET_UNIT}" ];
then
if [ ! -z "${CUR_LINK_KBPS}" ];
then
TMP_TARGET_US=$( adapt_target_to_slow_link $CUR_LINK_KBPS )
TMP_INTERVAL_STRING=$( adapt_interval_to_slow_link $TMP_TARGET_US )
CUR_TARGET_STRING="target ${TMP_TARGET_US}us ${TMP_INTERVAL_STRING}"
AUTO_TARGET="1"
sqm_logger "get_target defaulting to auto."
else
sqm_logger "required link bandwidth in kbps not passed to get_target()."
fi
fi
# but still allow explicit use of the keyword auto for backward compatibility
case ${CUR_TARGET_UNIT} in
auto|Auto|AUTO)
if [ ! -z "${CUR_LINK_KBPS}" ];
then
TMP_TARGET_US=$( adapt_target_to_slow_link $CUR_LINK_KBPS )
TMP_INTERVAL_STRING=$( adapt_interval_to_slow_link $TMP_TARGET_US )
CUR_TARGET_STRING="target ${TMP_TARGET_US}us ${TMP_INTERVAL_STRING}"
AUTO_TARGET="1"
else
sqm_logger "required link bandwidth in kbps not passed to get_target()."
fi
;;
esac
case ${CUR_TARGET_UNIT} in
default|Default|DEFAULT)
if [ ! -z "${CUR_LINK_KBPS}" ];
then
CUR_TARGET_STRING="" # return nothing so the default target is not over-ridden...
AUTO_TARGET="1"
#sqm_logger "get_target using qdisc default, no explicit target string passed."
else
sqm_logger "required link bandwidth in kbps not passed to get_target()."
fi
;;
esac
if [ ! -z "${CUR_TARGET}" ];
then
if [ -z "${CUR_TARGET_VALUE}" -o -z "${UNIT_VALID}" ];
then
[ -z "$AUTO_TARGET" ] && sqm_logger "${CUR_TARGET} is not a well formed tc target specifier; e.g.: 5ms (or s, us), or one of the strings auto or default."
fi
fi
;;
esac
# sqm_logger "target: ${CUR_TARGET_STRING}"
echo $CUR_TARGET_STRING
}
# for low bandwidth links fq_codels default target of 5ms does not work too well
# so increase target for slow links (note below roughly 2500kbps a single packet will \
# take more than 5 ms to be tansfered over the wire)
adapt_target_to_slow_link() {
CUR_LINK_KBPS=$1
CUR_EXTENDED_TARGET_US=
MAX_PAKET_DELAY_IN_US_AT_1KBPS=$(( 1000 * 1000 *1540 * 8 / 1000 ))
CUR_EXTENDED_TARGET_US=$(( ${MAX_PAKET_DELAY_IN_US_AT_1KBPS} / ${CUR_LINK_KBPS} )) # note this truncates the decimals
# do not change anything for fast links
[ "$CUR_EXTENDED_TARGET_US" -lt 5000 ] && CUR_EXTENDED_TARGET_US=5000
case ${QDISC} in
*codel|pie)
echo "${CUR_EXTENDED_TARGET_US}"
;;
esac
}
# codel looks at a whole interval to figure out wether observed latency stayed below target
# if target >= interval that will not work well, so increase interval by the same amonut that target got increased
adapt_interval_to_slow_link() {
CUR_TARGET_US=$1
case ${QDISC} in
*codel)
CUR_EXTENDED_INTERVAL_US=$(( (100 - 5) * 1000 + ${CUR_TARGET_US} ))
echo "interval ${CUR_EXTENDED_INTERVAL_US}us"
;;
pie)
## not sure if pie needs this, probably not
#CUR_EXTENDED_TUPDATE_US=$(( (30 - 20) * 1000 + ${CUR_TARGET_US} ))
#echo "tupdate ${CUR_EXTENDED_TUPDATE_US}us"
;;
esac
}
# set quantum parameter if available for this qdisc
get_quantum() {
case $QDISC in
*fq_codel|fq_pie|drr) echo quantum $1 ;;
*) ;;
esac
}
# only show limits to qdiscs that can handle them...
# Note that $LIMIT contains the default limit
get_limit() {
CURLIMIT=$1
case $QDISC in
*codel|*pie|pfifo_fast|sfq|pfifo) [ -z ${CURLIMIT} ] && CURLIMIT=${LIMIT} # use the global default limit
;;
bfifo) [ -z "$CURLIMIT" ] && [ ! -z "$LIMIT" ] && CURLIMIT=$(( ${LIMIT} * $( cat /sys/class/net/${IFACE}/mtu ) )) # bfifo defaults to txquelength * MTU,
;;
*) sqm_logger "${QDISC} does not support a limit"
;;
esac
sqm_logger "get_limit: $1 CURLIMIT: ${CURLIMIT}"
if [ ! -z "$CURLIMIT" ]
then
echo "limit ${CURLIMIT}"
fi
}
get_ecn() {
CURECN=$1
#sqm_logger CURECN: $CURECN
case ${CURECN} in
ECN)
case $QDISC in
*codel|*pie|*red)
CURECN=ecn
;;
*)
CURECN=""
;;
esac
;;
NOECN)
case $QDISC in
*codel|*pie|*red)
CURECN=noecn
;;
*)
CURECN=""
;;
esac
;;
*)
sqm_logger "ecn value $1 not handled"
;;
esac
#sqm_logger "get_ECN: $1 CURECN: ${CURECN} IECN: ${IECN} EECN: ${EECN}"
echo ${CURECN}
}
# This could be a complete diffserv implementation
diffserv() {
interface=$1
prio=1
# Catchall
$TC filter add dev $interface parent 1:0 protocol all prio 999 u32 \
match ip protocol 0 0x00 flowid 1:12
# Find the most common matches fast
#fc_pppoe() instead of fc() with effectice ingress classification for pppoe is very expensive and destroys LUL
fc 1:0 0x00 1:12 # BE
fc 1:0 0x20 1:13 # CS1
fc 1:0 0x10 1:11 # IMM
fc 1:0 0xb8 1:11 # EF
fc 1:0 0xc0 1:11 # CS3
fc 1:0 0xe0 1:11 # CS6
fc 1:0 0x90 1:11 # AF42 (mosh)
# Arp traffic
$TC filter add dev $interface protocol arp parent 1:0 prio $prio handle 500 fw flowid 1:11
prio=$(($prio + 1))
}
diffserv_pppoe() {
interface=$1
prio=1
# Catchall
$TC filter add dev $interface parent 1:0 protocol all prio 999 u32 \
match ip protocol 0 0x00 flowid 1:12
# Find the most common matches fast
#fc_pppoe() instead of fc() with effectice ingress classification for pppoe is very expensive and destroys LUL
fc_pppoe 1:0 0x00 1:12 # BE
fc_pppoe 1:0 0x20 1:13 # CS1
fc_pppoe 1:0 0x10 1:11 # IMM
fc_pppoe 1:0 0xb8 1:11 # EF
fc_pppoe 1:0 0xc0 1:11 # CS3
fc_pppoe 1:0 0xe0 1:11 # CS6
fc_pppoe 1:0 0x90 1:11 # AF42 (mosh)
# Arp traffic
$TC filter add dev $interface protocol arp parent 1:0 prio $prio handle 500 fw flowid 1:11
prio=$(($prio + 1))
}