LILiK
/
openwrt-packages-dist


								#!/bin/sh

								#

								# Copyright (C) 1999-2002 Riccardo Facchetti <riccardo@master.oasi.gpa.it>

								#

								#  for apcupsd release 3.14.1 (04 May 2007) - unknown

								#

								# platforms/apccontrol.  Generated from apccontrol.in by configure.

								#

								#  Note, this is a generic file that can be used by most

								#   systems. If a particular system needs to have something

								#   special, start with this file, and put a copy in the

								#   platform subdirectory.

								#


								#

								# These variables are needed for set up the autoconf other variables.

								#

								prefix=/usr

								exec_prefix=/usr


								APCPID=/var/run/apcupsd.pid

								APCUPSD=/usr/sbin/apcupsd

								SHUTDOWN=/sbin/halt

								SCRIPTSHELL=/bin/sh

								SCRIPTDIR=/etc/apcupsd

								WALL=true


								#

								# Concatenate all output from this script to the events file

								#  Note, the following kills the script in a power fail situation

								#   where the disks are mounted read-only.

								# exec >>/var/log/apcupsd.events 2>&1


								#

								# This piece is to substitute the default behaviour with your own script,

								# perl, or C program.

								# You can customize every single command creating an executable file (may be a

								# script or a compiled program) and calling it the same as the $1 parameter

								# passed by apcupsd to this script.

								#

								# After executing your script, apccontrol continues with the default action.

								# If you do not want apccontrol to continue, exit your script with exit

								# code 99. E.g. "exit 99".

								#

								# WARNING: the apccontrol file will be overwritten every time you update your

								# apcupsd, doing `make install'. Your own customized scripts will _not_ be

								# overwritten. If you wish to make changes to this file (discouraged), you

								# should change apccontrol.sh.in and then rerun the configure process.

								#

								if [ -f ${SCRIPTDIR}/${1} -a -x ${SCRIPTDIR}/${1} ]

								then

								    ${SCRIPTDIR}/${1} ${2} ${3} ${4}

								    # exit code 99 means he does not want us to do default action

								    if [ $? = 99 ] ; then

									exit 0

								    fi

								fi


								case "$1" in

								    killpower)

									echo "Apccontrol doing: ${APCUPSD} --killpower on UPS ${2}"

									sleep 10

									${APCUPSD} --killpower

									echo "Apccontrol has done: ${APCUPSD} --killpower on UPS ${2}" | ${WALL}

								    ;;

								    commfailure)

									echo "Warning communications lost with UPS ${2}" | ${WALL}

								    ;;

								    commok)

									echo "Communications restored with UPS ${2}" | ${WALL}

								    ;;

								#

								# powerout, onbattery, offbattery, mainsback events occur

								#   in that order.

								#

								    powerout)

									echo "Warning power loss detected on UPS ${2}" | ${WALL}

								    ;;

								    onbattery)

									echo "Power failure on UPS ${2}. Running on batteries." | ${WALL}

								    ;;

								    offbattery)

								    ;;

								    mainsback)

									echo "Power has returned on UPS ${2}..." | ${WALL}

									if [ -f /etc/powerfail ] ; then

									   printf "Continuing with shutdown."  | ${WALL}

									fi

								    ;;

								    failing)

									echo "Battery power exhaused on UPS ${2}. Doing shutdown." | ${WALL}

								    ;;

								    timeout)

									echo "Battery time limit exceeded on UPS ${2}. Doing shutdown." | ${WALL}

								    ;;

								    loadlimit)

									echo "Remaining battery charge below limit on UPS ${2}. Doing shutdown." | ${WALL}

								    ;;

								    runlimit)

									echo "Remaining battery runtime below limit on UPS ${2}. Doing shutdown." | ${WALL}

								    ;;

								    doreboot)

									echo "UPS ${2} initiating Reboot Sequence" | ${WALL}

									echo "apcupsd UPS ${2} initiated reboot" && /sbin/reboot

								    ;;

								    doshutdown)

									echo "UPS ${2} initiated Shutdown Sequence" | ${WALL}

									echo "apcupsd UPS ${2} initiated shutdown" && /sbin/halt

								    ;;

								    annoyme)

									echo "Power problems with UPS ${2}. Please logoff." | ${WALL}

								    ;;

								    emergency)

									echo "Emergency Shutdown. Possible battery failure on UPS ${2}." | ${WALL}

								    ;;

								    changeme)

									echo "Emergency! Batteries have failed on UPS ${2}. Change them NOW" | ${WALL}

								    ;;

								    remotedown)

									echo "Remote Shutdown. Beginning Shutdown Sequence." | ${WALL}

								    ;;

								    restartme)

									echo -n "Restarting APCUPSD Power Management: "

									THEPID=`cat ${APCPID}`

									kill ${THEPID}

									rm -f ${APCPID}

									rm -f /etc/powerfail

									rm -f /etc/nologin

									sleep 5

									`${APCUPSD}`

									echo "apcupsd"

								    ;;

								    startselftest)

								    ;;

								    endselftest)

								    ;;

								    battdetach)

								    ;;

								    battattach)

								    ;;

								    *)	echo "Usage: ${0##*/} command"

									echo "	     warning: this script is intended to be launched by"

									echo "	     apcupsd and should never be launched by users."

									exit 1

								    ;;

								esac