LILiK
/
openwrt-packages-dist


								#

								#

								# Here you find a description on every parameter supported

								# and used by ddns-scripts and corresponding LuCI application

								#

								# Inside your ddns configuration file (/etc/config/ddns)

								# you might not find some of below described options.

								# This is because you don't need to define options

								# if using there defaults. The LuCI application will delete

								# options that configured to there default values.

								#

								# If you have a working ddns configuration from old ddns-scripts (Version 1.x)

								# everything will function the same with new scripts

								# without any changes to the configuration.

								#

								# If you like to use this file for your configuration then

								# use a copy, because the used software to modify the

								# configuration files will throw away all empty lines

								# and those starting with # (comments).

								#


								#####################################################################

								# Global application settings

								#

								config ddns "global"


									###########

									# set date format to use for display date in logfiles

									# and LuCI web application.

									# For codes see man pages of date command.

									# default: "%F %R" (ISO 8601 format)

								#	option date_format "%F %R"


									###########

									# set run directory to use for .pid and .update files

									# there will be a separate file for every running service section

									# default: "/var/run/ddns"

								#	option run_dir "/var/run/ddns"


									###########

									# set log directory to use for .log files

									# there will be a separate file for every running service section

									# default: "/var/log/ddns"

								#	option log_dir "/var/log/ddns"


									###########

									# set number of lines stored in .log file before auto truncated

									# default: "250" lines

								#	option log_lines "250"


									###########

									# Whether to allow to send Private/Special IP's to the DDNS provider

									# IPv4: 0.x, 10.x, 127.x, 172.16.x-172.31.x, 192.168.x

									# IPv6: ::, Fxxx:

									# default: "0"	disabled

								#	option allow_local_ip "0"


								#####################################################################

								# DDNS service settings

								#

								# for each service you want to serve you need a separate configuration

								# if you need IPv4 and IPv6 you need to setup 2 separate configurations

								# with different names. (i.e. "myddns_ipv4" and "myddns_ipv6")

								# do not use white-spaces or dashes "-" or "@" ":" "!" or

								# other special characters inside name.

								config service "myddns"


									########### Basic settings ########################


									###########

									# enable/disable this service section

									# default: "0"	disabled

									option enabled "0"


									###########

									# detecting/sending IPv4 or IPv6 address to the DDNS provider

									# set to "1" if you want to use IPv6

									# default: "0"	use IPv4

									option use_ipv6 "0"


									###########

									# defines the network as defined in /etc/config/network

									# to be monitored for up/down events to start via hotplug

									default: "wan"	for IPv4

									default: "wan6"	for IPv6

									option interface "wan"


									###########

									# Next you need to specify the name of the service you are

									# connecting to "eg. dyndns.org".  The format of the update

									# urls for several different dynamic dns services is specified

									# in the "/usr/lib/ddns/services" file for IPv4 and in

									# "/usr/lib/ddns/service_ipv6" file. This list is hardly complete

									# as there are many, many different dynamic dns services.

									# If your service is on the list you can merely specify it with the

									# "service_name" option.  Otherwise you will need to determine

									# the format of the url to update with.  You can either add an

									# entry to the "/usr/lib/ddns/services" or "services_ipv6" file

									# or specify this with the "update_url" option.

									# If your ddns provider doesn't work with ddns-scripts because

									# there are additional parameters or other special thinks to be done,

									# then you could write your own script to send updates to your ddns provider.

									# Have a look into /usr/lib/ddns/update_sample.sh

									# The script is specified in "update_script"

									# Either set "service_name" or one of "update_url" and "update_script"

									# default: none

									option service_name "dyndns.org"


									# sample:

									# "http://[USERNAME]:[PASSWORD]@members.dyndns.org/nic/update?hostname=[DOMAIN]&myip=[IP]"

								#	option update_url   ""


									# sample:

									# "/usr/lib/ddns/update_sample.sh"

								#	option update_script   ""


									###########

									# You must specify your domain/host name, your username and your password

									# as you get from you DDNS provider. Keep an eye on providers help pages.

									#

									# Your DNS name / replace [DOMAIN] in update_url

									# default: none

									option domain ""


									# Username of your DDNS service account / replace [USERNAME] in update_url

									# default: none

									option username ""


									# Password of your DDNS service account / replace [PASSWORD] in update_url

									# default: none

									option password ""


									###########

									# use HTTPS for secure communication with you DDNS provider

									# personally found some providers having problems when not sending

									# updates via HTTPS. You must not specify "https://" in update_url.

									# It's modified by the scripts themselves

									# Needs GNU Wget (with SSL support) or cURL to be installed.

									# default: "0"	do not use HTTPS

									option use_https "0"


									# if using HTTPS (see above) the transfer program tries to verify

									# the providers server certificate. For verification there needs to be

									# the counterpart on this machine. Specify the path or path/file where

									# the transfer program can find them. (might need package CA-certificates)

									# if you don't want to verify servers certificate (insecure) you should

									# this parameter to "IGNORE" (in capital letters)

									# default: (none)	path where CA-certificate package is installed

									option cacert "/etc/ssl/certs"


									###########

									# for logging and control if everything work fine you can get information inside

									# system log . Critical Errors are always send to system log.

									# You can define which information you like to log

									# 1 == info, notice, warning, errors

									# 2 == notice, warning, errors

									# 3 == warning, errors

									# 4 == errors

									# default: "0" off

									option use_syslog  "0"


									###########

									# for logging and control if everything work fine you can get information inside

									# log file. You find the file per default in /var/log/ddns/[sectionname].log

									# The path can be modified for all log files in ddns.global section (see above)

									# default: "1" on

									option use_logfile "1"


									########### Advanced settings #####################


									###########

									# you need to specify how ddns-scripts should detect you current local ip.

									# the ip_source could be set to "network", "web", "interface" or "script"

									# the parameters below specifying the additional information needed for

									# the corresponding ip_spource configuration

									# default: "network"


									# ip_source "network" additional uses option ip_network and detects the

									# current local ip on network as defined in /etc/config/network

									# default: "wan"  using IPv4

									# default: "wan6" using IPv6

									option ip_source  "network"

									option ip_network "wan"


									# ip_source "web" additional uses option ip_url and detects the current

									# local ip from special web sides that response with the ip address of

									# calling host. If you are behind a firewall/NAT this is the best option

									# since none of the local networks or interfaces will have the external ip.

									# default: "http://checkip.dyndns.com"   using IPv4

									# default: "http://checkipv6.dyndns.com" using IPv6

								#	option ip_source "web"

								#	option ip_url    "http://checkip.dyndns.com"


									# ip_source "interface" additional uses option ip_interface

									# ip_source "interface" uses one of the locally installed physical interfaces

									# to detect independent from network they configured to.

									# default: none

								#	option ip_source    "interface"

								#	option ip_interface "eth1"


									# ip_source "script" additional uses option ip_script

									# it's useful if you want to write your own script to detect the

									# current local ip. put full path into ip_script option.

									# The script must be executable.

									# default: none

								#	option ip_source "script"

								#	option ip_script ""


									###########

									# force_ipversion option will set the "-4" respectively "-6" parameter

									# on command line of transfer and DNS lookup program.

									# So the whole communication uses the selected IP version between both ends.

									# needs GNU Wget or cURL installed for transfer and

									# BIND's host for DNS lookup.

									# default: "0" disabled

									option force_ipversion "0"


									###########

									# Normally the current (in the internet) registered ip is detected using the

									# local defined name lookup policies (i.e. /etc/resolve.conf etc.)

									# Specify here a DNS server to use instead of the defaults.

									# you can use hostname or ip address

									# i.e. "google-public-dns-a.google.com"

									# default: none

								#	option dns_server "google-public-dns-a.google.com"


									# By default every DNS call is made via UDP protocol

									# Some internet provider offer modems that cache UDP DNS requests.

									# They also redirect calls to external servers to local.

									# To force the usage of TCP for DNS requests enable this option

									# Needs BIND's host program be installed

									# default: "0" disabled

								#	option force_dnstcp "0"


									###########

									# If a Proxy is need to access HTTP/HTTPS pages on the WEB

									# it can be configured here also for sending updates to the

									# DDNS provider. If you configured use_https='1' above, you

									# need to setup your HTTPS proxy here, otherwise your

									# HTTP proxy. !!! You should not detect your current IP

									# ip_source='web' (see above) because this request is also

									# send via the configured proxy !!!

									# Syntax: [user:password@]proxy:port !port is required !

									# IPv6 address must be in squared brackets "[...]"

									# default: none

								#	option proxy ''


									########### Timer settings ########################


									###########

									# defines the time interval to check if local IP has changed

									# After the first start and first update send, the system will

									# wait this time before verify if update was successful send.

									# !!! checks below 5 minutes make no sense because the Internet

									# needs about 5-10 minutes to sync an IP-change to all DNS servers !!!

									# accepted unit entry’s: 'seconds' 'minutes' 'hours'

									# minimum 5 minutes == 300 seconds

									# default 10 minutes

									option check_interval	'10'

									option check_unit	'minutes'


									###########

									# force to send an update to service provider, if no change was detected.

									# consult DDNS providers documentation if your DDNS entry might timeout.

									# accepted unit entry’s: 'minutes' 'hours' 'days'

									# minimum needs to be greater or equal check interval (see above)

									# A special setting of '0' is allowed, which forces the script to run once.

									# It sends an update, verify if update was accepted by DNS

									# (retry if not) and finish. Useful if you want to start by your own (i.e. cron)

									# default 3 days == 72 hours

									option force_interval	'72'

									option force_unit	'hours'


									###########

									# if error happen on detecting, sending or updating the

									# script will retry the relevant action for retry_count times

									# before stopping script execution.

									# default: 5

									option retry_count '5'


									###########

									# if error happen on detecting, sending or updating the

									# script will retry the relevant action.

									# here you define the time to wait before retry is started

									# accepted unit entry’s: 'seconds' 'minutes'

									# default: 60 seconds

									option retry_interval	'60'

									option retry_unit	'seconds'