You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

222 lines
6.7 KiB

#!/bin/sh
# List of parameters passed through environment
#* reason -- why this script was called, one of: pre-init connect disconnect
#* VPNGATEWAY -- vpn gateway address (always present)
#* TUNDEV -- tunnel device (always present)
#* INTERNAL_IP4_ADDRESS -- address (always present)
#* INTERNAL_IP4_MTU -- mtu (often unset)
#* INTERNAL_IP4_NETMASK -- netmask (often unset)
#* INTERNAL_IP4_NETMASKLEN -- netmask length (often unset)
#* INTERNAL_IP4_NETADDR -- address of network (only present if netmask is set)
#* INTERNAL_IP4_DNS -- list of dns servers
#* INTERNAL_IP4_NBNS -- list of wins servers
#* INTERNAL_IP6_ADDRESS -- IPv6 address
#* INTERNAL_IP6_NETMASK -- IPv6 netmask
#* INTERNAL_IP6_DNS -- IPv6 list of dns servers
#* CISCO_DEF_DOMAIN -- default domain name
#* CISCO_BANNER -- banner from server
#* CISCO_SPLIT_INC -- number of networks in split-network-list
#* CISCO_SPLIT_INC_%d_ADDR -- network address
#* CISCO_SPLIT_INC_%d_MASK -- subnet mask (for example: 255.255.255.0)
#* CISCO_SPLIT_INC_%d_MASKLEN -- subnet masklen (for example: 24)
#* CISCO_SPLIT_INC_%d_PROTOCOL -- protocol (often just 0)
#* CISCO_SPLIT_INC_%d_SPORT -- source port (often just 0)
#* CISCO_SPLIT_INC_%d_DPORT -- destination port (often just 0)
#* CISCO_IPV6_SPLIT_INC -- number of networks in IPv6 split-network-list
#* CISCO_IPV6_SPLIT_INC_%d_ADDR -- IPv6 network address
#* CISCO_IPV6_SPLIT_INC_$%d_MASKLEN -- IPv6 subnet masklen
HOOKS_DIR=/etc/openconnect
# FIXMEs:
# Section A: route handling
# 1) The 3 values CISCO_SPLIT_INC_%d_PROTOCOL/SPORT/DPORT are currently being ignored
# In order to use them, we'll probably need os specific solutions
# * Linux: iptables -t mangle -I PREROUTING <conditions> -j ROUTE --oif $TUNDEV
# This would be an *alternative* to changing the routes (and thus 2) and 3)
# shouldn't be relevant at all)
# 2) There are two different functions to set routes: generic routes and the
# default route. Why isn't the defaultroute handled via the generic route case?
# 3) In the split tunnel case, all routes but the default route might get replaced
# without getting restored later. We should explicitely check and save them just
# like the defaultroute
# 4) Replies to a dhcp-server should never be sent into the tunnel
# Section B: Split DNS handling
# 1) We parse CISCO_SPLIT_DNS and use dnsmasq to set it
do_connect() {
if [ -n "$CISCO_BANNER" ]; then
logger -t openconnect "Connect Banner:"
echo "$CISCO_BANNER" | while read LINE ; do logger -t openconnect "|" "$LINE" ; done
fi
proto_init_update "$TUNDEV" 1
if [ -n "$INTERNAL_IP4_MTU" ]; then
MTU=$INTERNAL_IP4_MTU
fi
if [ -z "$MTU" ]; then
MTU=1412
fi
proto_add_ipv4_address "$INTERNAL_IP4_ADDRESS" 32 "" "$INTERNAL_IP4_ADDRESS"
if [ -n "$INTERNAL_IP4_NETMASKLEN" ]; then
proto_add_ipv4_route "$INTERNAL_IP4_NETADDR" "$INTERNAL_IP4_NETMASKLEN"
fi
# If the netmask is provided, it contains the address _and_ netmask
if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then
INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128"
fi
if [ -n "$INTERNAL_IP6_NETMASK" ]; then
addr="${INTERNAL_IP6_NETMASK%%/*}"
mask="${INTERNAL_IP6_NETMASK##*/}"
[[ "$addr" != "$mask" ]] && proto_add_ipv6_address "$addr" "$mask"
fi
DNSMASQ_FILE="/tmp/dnsmasq.d/openconnect.$TUNDEV"
LOCAL_DOMAIN=$(uci get dhcp.@dnsmasq[0].domain)
rm -f $DNSMASQ_FILE
if [ -n "$CISCO_SPLIT_DNS" ] && [ -d "/tmp/dnsmasq.d/" ];then
SDNS=`echo $CISCO_SPLIT_DNS|sed 's/,/\n/g'`
echo "$SDNS" | while read i; do
if [ "$i" = "$LOCAL_DOMAIN" ];then
continue
fi
if [ -n "$INTERNAL_IP4_DNS" ];then
for dns in $INTERNAL_IP4_DNS;do
echo "server=/$i/$dns" >> $DNSMASQ_FILE
done
fi
if [ -n "$INTERNAL_IP6_DNS" ];then
for dns in $INTERNAL_IP6_DNS;do
echo "server=/$i/$dns" >> $DNSMASQ_FILE
done
fi
echo "rebind-domain-ok=$i" >> $DNSMASQ_FILE
done
/etc/init.d/dnsmasq restart
else
if [ -n "$INTERNAL_IP4_DNS" ];then
for dns in $INTERNAL_IP4_DNS;do
proto_add_dns_server "$dns"
done
fi
if [ -n "$INTERNAL_IP6_DNS" ];then
for dns in $INTERNAL_IP6_DNS;do
proto_add_dns_server "$dns"
done
fi
if [ -n "$CISCO_DEF_DOMAIN" ] && [ "$CISCO_DEF_DOMAIN" != "$LOCAL_DOMAIN" ];then
if [ -n "$INTERNAL_IP4_DNS" ];then
for dns in $INTERNAL_IP4_DNS;do
echo "server=/$CISCO_DEF_DOMAIN/$dns" >> $DNSMASQ_FILE
done
fi
if [ -n "$INTERNAL_IP6_DNS" ];then
for dns in $INTERNAL_IP6_DNS;do
echo "server=/$CISCO_DEF_DOMAIN/$dns" >> $DNSMASQ_FILE
done
fi
proto_add_dns_search "$CISCO_DEF_DOMAIN"
fi
fi
if [ -n "$CISCO_SPLIT_INC" ]; then
i=0
while [ $i -lt $CISCO_SPLIT_INC ] ; do
eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}"
eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}"
eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}"
if [ $NETWORK != "0.0.0.0" ]; then
proto_add_ipv4_route "$NETWORK" "$NETMASKLEN"
else
proto_add_ipv4_route "0.0.0.0" 0
fi
i=$(($i + 1))
done
elif [ -n "$INTERNAL_IP4_ADDRESS" ]; then
proto_add_ipv4_route "0.0.0.0" 0
fi
if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then
i=0
while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do
eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}"
eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}"
if [ $NETMASKLEN -lt 128 ]; then
proto_add_ipv6_route "$NETWORK" "$NETMASKLEN"
else
proto_add_ipv6_route "::0" 0
fi
i=$(($i + 1))
done
elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then
proto_add_ipv6_route "::0" 0
fi
proto_send_update "$INTERFACE"
}
do_disconnect() {
rm -f "/tmp/dnsmasq.d/openconnect.$TUNDEV"
proto_init_update "$TUNDEV" 0
proto_send_update "$INTERFACE"
}
#### Hooks
run_hooks() {
HOOK="$1"
if [ -d ${HOOKS_DIR}/${HOOK}.d ]; then
for script in ${HOOKS_DIR}/${HOOK}.d/* ; do
[ -f $script ] && . $script
done
fi
}
#### Main
if [ -z "$reason" ]; then
logger -t openconnect "this script must be called from vpnc" 1>&2
exit 1
fi
if [ -z "$INTERFACE" ]; then
logger -t openconnect "this script must be called for an active interface"
exit 1
fi
. /lib/netifd/netifd-proto.sh
case "$reason" in
pre-init)
run_hooks pre-init
;;
connect)
run_hooks connect
do_connect
run_hooks post-connect
;;
disconnect)
run_hooks disconnect
do_disconnect
run_hooks post-disconnect
;;
reconnect)
run_hooks reconnect
;;
attempt-reconnect)
run_hooks attempt-reconnect
;;
*)
logger -t openconnect "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2
exit 1
;;
esac
exit 0