You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
69 lines
2.1 KiB
69 lines
2.1 KiB
# Kismet drone config file
|
|
|
|
version=newcore.1
|
|
|
|
# Name of drone server (informational)
|
|
servername=Kismet-Drone
|
|
|
|
# Drone configuration
|
|
# Protocol, interface, and port to listen on
|
|
dronelisten=tcp://127.0.0.1:2502
|
|
# Hosts allowed to connect, comma separated. May include netmasks.
|
|
# allowedhosts=127.0.0.1,10.10.10.0/255.255.255.0
|
|
droneallowedhosts=127.0.0.1
|
|
# Maximum number of drone clients
|
|
dronemaxclients=10
|
|
droneringlen=65535
|
|
|
|
# Do we have a GPS?
|
|
gps=true
|
|
# Do we use a locally serial attached GPS, or use a gpsd server?
|
|
# (Pick only one)
|
|
gpstype=gpsd
|
|
# gpstype=serial
|
|
# What serial device do we look for the GPS on?
|
|
gpsdevice=/dev/rfcomm0
|
|
# Host:port that GPSD is running on. This can be localhost OR remote!
|
|
gpshost=localhost:2947
|
|
# Do we lock the mode? This overrides coordinates of lock "0", which will
|
|
# generate some bad information until you get a GPS lock, but it will
|
|
# fix problems with GPS units with broken NMEA that report lock 0
|
|
gpsmodelock=false
|
|
# Do we try to reconnect if we lose our link to the GPS, or do we just
|
|
# let it die and be disabled?
|
|
gpsreconnect=true
|
|
|
|
# See the README for full information on the new source format
|
|
# ncsource=interface:options
|
|
ncsource=null
|
|
# for example:
|
|
# ncsource=wlan0
|
|
# ncsource=wifi0:type=madwifi
|
|
# ncsource=wlan0:name=intel,hop=false,channel=11
|
|
|
|
# Special per-source options
|
|
# sourceopts=[sourcename|*]:opt1,opt2
|
|
# sourceopts=*:fuzzycrypt,weakvalidate
|
|
|
|
# Comma-separated list of sources to enable, if you don't want to enable all
|
|
# the sources you defined.
|
|
# enablesource=source1,source2
|
|
|
|
# How many channels per second do we hop? (1-10)
|
|
channelvelocity=5
|
|
|
|
# By setting the dwell time for channel hopping we override the channelvelocity
|
|
# setting above and dwell on each channel for the given number of seconds.
|
|
#channeldwell=10
|
|
|
|
# Users outside the US might want to use this list:
|
|
# channellist=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12
|
|
channellist=IEEE80211b:1:3,6:3,11:3,2,7,3,8,4,9,5,10
|
|
|
|
# US IEEE 80211a
|
|
channellist=IEEE80211a:36,40,44,48,52,56,60,64,149,153,157,161,165
|
|
|
|
# Combo
|
|
channellist=IEEE80211ab:1:3,6:3,11:3,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64,149,153,157,161,165
|
|
|
|
|