You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

110 lines
4.1 KiB

#!/bin/sh
. /lib/functions.sh
. ../netifd-proto.sh
init_proto "$@"
proto_vpnc_init_config() {
proto_config_add_string "server"
proto_config_add_string "username"
proto_config_add_string "hexpasswd"
proto_config_add_string "authgroup"
proto_config_add_string "password"
proto_config_add_string "token_mode"
proto_config_add_string "token_secret"
proto_config_add_string "interface"
proto_config_add_string "passgroup"
proto_config_add_string "hexpassgroup"
proto_config_add_string "domain"
proto_config_add_string "vendor"
proto_config_add_string "natt_mode"
proto_config_add_string "dh_group"
proto_config_add_string "pfs"
proto_config_add_boolean "enable_single_des"
proto_config_add_boolean "enable_no_enc"
proto_config_add_int "mtu"
proto_config_add_string "local_addr"
proto_config_add_int "local_port"
proto_config_add_int "udp_port"
proto_config_add_int "dpd_idle"
proto_config_add_string "auth_mode"
proto_config_add_string "target_network"
proto_config_add_boolean "authfail"
no_device=1
available=1
}
proto_vpnc_setup() {
local config="$1"
json_get_vars server username hexpasswd authgroup password token_mode token_secret interface passgroup hexpassgroup domain vendor natt_mode dh_group pfs enable_single_des enable_no_enc mtu local_addr local_port udp_port dpd_idle auth_mode target_network authfail
grep -q tun /proc/modules || insmod tun
logger -t vpnc "initializing..."
serv_addr=
for ip in $(resolveip -t 10 "$server"); do
( proto_add_host_dependency "vpn-$config" "$ip" $interface )
serv_addr=1
done
[ -n "$serv_addr" ] || {
logger -t vpnc "Could not resolve server address: '$server'"
sleep 60
proto_setup_failed "$config"
exit 1
}
mkdir -p /var/etc
umask 077
pwfile="/var/etc/vpnc-$config.conf"
echo "IPSec gateway $server" > "$pwfile"
cmdline="--no-detach --pid-file /var/run/vpnc-$config.pid --ifname vpn-$config --non-inter --script /lib/netifd/vpnc-script $pwfile"
[ -f /etc/vpnc/ca-vpn-$config.pem ] && echo "CA-File /etc/vpnc/ca-vpn-$config.pem" >> "$pwfile"
[ -n "$hexpasswd" ] && echo "Xauth obfuscated password $hexpasswd" >> "$pwfile"
[ -n "$authgroup" ] && echo "IPSec ID $authgroup" >> "$pwfile"
[ -n "$username" ] && echo "Xauth username $username" >> "$pwfile"
[ -n "$password" ] && echo "Xauth password $password" >> "$pwfile"
[ -n "$passgroup" ] && echo "IPSec secret $passgroup" >> "$pwfile"
[ -n "$hexpassgroup" ] && echo "IPSec obfuscated secret $hexpassgroup" >> "$pwfile"
[ -n "$domain" ] && echo "Domain $domain" >> "$pwfile"
[ -n "$vendor" ] && echo "Vendor $vendor" >> "$pwfile"
[ -n "$natt_mode" ] && echo "NAT Traversal Mode $natt_mode" >> "$pwfile"
[ -n "$dh_group" ] && echo "IKE DH Group $dh_group" >> "$pwfile"
[ -n "$pfs" ] && echo "Perfect Forward Secrecy $pfs" >> "$pwfile"
[ "${enable_single_des:-0}" -gt 0 ] && echo "Enable Single DES" >> "$pwfile"
[ "${enable_no_enc:-0}" -gt 0 ] && echo "Enable no encryption" >> "$pwfile"
[ -n "$mtu" ] && echo "Interface MTU $mtu" >> "$pwfile"
[ -n "$local_addr" ] && echo "Local Addr $local_addr" >> "$pwfile"
[ -n "$local_port" ] && echo "Local Port $local_port" >> "$pwfile"
[ -n "$udp_port" ] && echo "Cisco UDP Encapsulation Port $udp_port" >> "$pwfile"
[ -n "$dpd_idle" ] && echo "DPD idle timeout (our side) $dpd_idle" >> "$pwfile"
[ -n "$auth_mode" ] && echo "IKE Authmode $auth_mode" >> "$pwfile"
[ -n "$target_network" ] && echo "IPSEC target network $target_network" >> "$pwfile"
proto_export INTERFACE="$config"
logger -t vpnc "executing 'vpnc $cmdline'"
proto_run_command "$config" /usr/sbin/vpnc $cmdline
}
proto_vpnc_teardown() {
local config="$1"
pwfile="/var/etc/vpnc-$config.conf"
json_get_var authfail authfail
# On error exit (vpnc only has success = 0 and error = 1, so
# we can't be fine-grained and say only auth error)
# and authfail setting true, then don't retry starting vpnc
# This is used for the case were the server blocks repeated
# failed authentication attempts (which will occur if the password
# is wrong, for example).
if [ ${ERROR:-0} -gt 0 ] && [ "${authfail:-0}" -gt 0 ]; then
proto_block_restart "$config"
fi
rm -f $pwfile
logger -t vpnc "bringing down vpnc"
proto_kill_command "$config" 2
}
add_protocol vpnc