You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Stan Grishin 9f135a9042 vpnbypass: bugfix: PROCD command not found on stop 5 years ago
..
README.md vpnbypass: bugfix: PROCD command not found on stop 5 years ago
vpnbypass.conf vpnbypass: updated service enable/start logic. 8 years ago
vpnbypass.hotplug vpnbypass: initial commit 8 years ago
vpnbypass.init vpnbypass: bugfix: PROCD command not found on stop 5 years ago

README.md

VPN Bypass

A simple PROCD-based vpnbypass service for OpenWrt/LEDE Project. Useful if your router accesses internet thru VPN client/tunnel, but you want specific traffic (ports, IP ranges, domains or local IP ranges) to be routed outside of this tunnel.

Features

  • Allows to define local ports so that traffic to them is routed outside of the VPN tunnel (by default routes Plex Media Server traffic (port 32400) outside of the VPN tunnel).
  • Allows to define IPs/subnets in local network so that their traffic is routed outside of the VPN tunnel (by default routes traffic from 192.168.1.81-192.168.1.87 outside of the VPN tunnel).
  • Allows to define remote IPs/ranges that they are accessed outside of the VPN tunnel (by default routes LogmeIn Hamachi traffic (25.0.0.0/8) outside of the VPN tunnel).
  • Allows to define list of domain names which are accessed outside of the VPN tunnel (useful for Netflix, Hulu, etc).
  • Doesn't stay in memory -- creates the iptables rules which are automatically updated on WAN up/down.
  • Has a companion package (luci-app-vpnbypass) so everything can be configured with Web UI.
  • Proudly made in Canada, using locally-sourced electrons.

Screenshot (luci-app-vpnbypass)

screenshot

Requirements

This service requires following packages to be installed on your router: ipset and iptables. Additionally, if you want to use Domain Bypass feature, you need to install dnsmasq-full (dnsmasq-full requires you uninstall dnsmasq first).

To fully satisfy the requirements for both IP/Port VPN Bypass and Domain Bypass features connect to your router via ssh and run the following commands:

opkg update; opkg remove dnsmasq; opkg install ipset iptables dnsmasq-full

To satisfy the requirements for just IP/Port VPN Bypass connect to your router via ssh and run the following commands:

opkg update; opkg install ipset iptables

Unmet dependencies

If you are running a development (trunk/snapshot) build of OpenWrt/LEDE Project on your router and your build is outdated (meaning that packages of the same revision/commit hash are no longer available and when you try to satisfy the requirements you get errors), please flash either current LEDE release image or current development/snapshot image.

How to install

Please make sure that the requirements are satisfied and install vpnbypass and luci-app-vpnbypass from Web UI or connect to your router via ssh and run the following commands:

opkg update
opkg install vpnbypass luci-app-vpnbypass

If these packages are not found in the official feed/repo for your version of OpenWrt/LEDE Project, you will need to add a custom repo to your router first.

Default Settings

Default configuration has service disabled (use Web UI to enable/start service or run uci set vpnbypass.config.enabled=1; uci commit vpnbypass;) and routes Plex Media Server traffic (port 32400) outside of the VPN tunnel, routes LogmeIn Hamachi traffic (25.0.0.0/8) outside of the VPN tunnel and also routes internet traffic from local IPs 192.168.1.81-192.168.1.87 outside of the VPN tunnel. You can safely delete these example rules if they do not apply to you.

Documentation / Discussion

Please head to OpenWrt Forum for discussions of this service.

Bypass Domains Format/Syntax

Domain lists should be in following format/syntax: /domain1.com/domain2.com/vpnbypass. Please don't forget the leading / and trailing /vpnbypass. There's no validation if you enter something incorrectly -- it just won't work. Please see Notes/Known Issues if you want to edit this setting manually, without Web UI.

What's New

1.3.0:

  • No longer depends on hardcoded WAN interface name (wan) works with other interface names (like wwan).
  • Table ID, IPSET name and FW_MARK as well as FW_MASK can be defined in config file.
  • Uses iptables, not ip rules for handling local IPs/ranges.
  • More reliable creation/destruction of VPNBYPASS iptables chain.
  • Updated Web UI enables/start and stops service.

Notes/Known Issues

  1. Domains to be accessed outside of VPN tunnel are handled by dnsmasq and thus are not defined in /etc/config/vpnpass, but rather in /etc/config/dhcp. To add/delete/edit domains you can use VPN Bypass Web UI or you can edit /etc/config/dhcp manually or run following commands:
uci add_list dhcp.@dnsmasq[-1].ipset='/github.com/plex.tv/google.com/vpnbypass'
uci add_list dhcp.@dnsmasq[-1].ipset='/hulu.com/netflix.com/nhl.com/vpnbypass'
uci commit dhcp
/etc/init.d/dnsmasq restart

This feature requires dnsmasq-full to work. See Requirements paragraph for more details.