You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
390 lines
15 KiB
390 lines
15 KiB
#!/bin/sh
|
|
# Cero3 Shaper
|
|
# A 3 bin tc_codel and ipv6 enabled shaping script for
|
|
# ethernet gateways
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License version 2 as
|
|
# published by the Free Software Foundation.
|
|
#
|
|
# Copyright (C) 2012-4 Michael D. Taht, Toke Høiland-Jørgensen, Sebastian Moeller
|
|
|
|
# Compared to the complexity that debloat had become
|
|
# this cleanly shows a means of going from diffserv marking
|
|
# to prioritization using the current tools (ip(6)tables
|
|
# and tc. I note that the complexity of debloat exists for
|
|
# a reason, and it is expected that script is run first
|
|
# to setup various other parameters such as BQL and ethtool.
|
|
# (And that the debloat script has setup the other interfaces)
|
|
|
|
# You need to jiggle these parameters. Note limits are tuned towards a <10Mbit uplink <60Mbup down
|
|
|
|
. /usr/lib/sqm/functions.sh
|
|
|
|
ipt_setup() {
|
|
|
|
ipt -t mangle -N QOS_MARK_${IFACE}
|
|
|
|
ipt -t mangle -A QOS_MARK_${IFACE} -j MARK --set-mark 0x2
|
|
# You can go further with classification but...
|
|
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS1 -j MARK --set-mark 0x3
|
|
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS6 -j MARK --set-mark 0x1
|
|
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class EF -j MARK --set-mark 0x1
|
|
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class AF42 -j MARK --set-mark 0x1
|
|
ipt -t mangle -A QOS_MARK_${IFACE} -m tos --tos Minimize-Delay -j MARK --set-mark 0x1
|
|
|
|
# and it might be a good idea to do it for udp tunnels too
|
|
|
|
# Turn it on. Preserve classification if already performed
|
|
|
|
if [ "$SQUASH_DSCP" = "1" ]
|
|
then
|
|
sqm_logger "Squashing differentiad services code points (DSCP) from ingress."
|
|
ipt -t mangle -I PREROUTING -i $IFACE -m dscp ! --dscp 0 -j DSCP --set-dscp-class be
|
|
else
|
|
sqm_logger "Keeping differentiad services code points (DSCP) from ingress."
|
|
ipt -t mangle -A PREROUTING -i $IFACE -m mark --mark 0x00 -g QOS_MARK_${IFACE}
|
|
fi
|
|
|
|
ipt -t mangle -A POSTROUTING -o $IFACE -m mark --mark 0x00 -g QOS_MARK_${IFACE}
|
|
|
|
# The Syn optimization was nice but fq_codel does it for us
|
|
# ipt -t mangle -A PREROUTING -i s+ -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x01
|
|
# Not sure if this will work. Encapsulation is a problem period
|
|
|
|
ipt -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2 # tcp tunnels need ordering
|
|
|
|
# Emanating from router, do a little more optimization
|
|
# but don't bother with it too much.
|
|
|
|
ipt -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
|
|
|
|
#Not clear if the second line is needed
|
|
#ipt -t mangle -A OUTPUT -o $IFACE -g QOS_MARK_${IFACE}
|
|
|
|
}
|
|
|
|
|
|
# TC rules
|
|
|
|
egress() {
|
|
|
|
CEIL=${UPLINK}
|
|
PRIO_RATE=`expr $CEIL / 3` # Ceiling for prioirty
|
|
BE_RATE=`expr $CEIL / 6` # Min for best effort
|
|
BK_RATE=`expr $CEIL / 6` # Min for background
|
|
BE_CEIL=`expr $CEIL - 16` # A little slop at the top
|
|
|
|
LQ="quantum `get_mtu $IFACE $CEIL`"
|
|
|
|
$TC qdisc del dev $IFACE root 2> /dev/null
|
|
$TC qdisc add dev $IFACE root handle 1: `get_stab_string` htb default 12
|
|
$TC class add dev $IFACE parent 1: classid 1:1 htb $LQ rate ${CEIL}kbit ceil ${CEIL}kbit `get_htb_adsll_string`
|
|
$TC class add dev $IFACE parent 1:1 classid 1:10 htb $LQ rate ${CEIL}kbit ceil ${CEIL}kbit prio 0 `get_htb_adsll_string`
|
|
$TC class add dev $IFACE parent 1:1 classid 1:11 htb $LQ rate 128kbit ceil ${PRIO_RATE}kbit prio 1 `get_htb_adsll_string`
|
|
$TC class add dev $IFACE parent 1:1 classid 1:12 htb $LQ rate ${BE_RATE}kbit ceil ${BE_CEIL}kbit prio 2 `get_htb_adsll_string`
|
|
$TC class add dev $IFACE parent 1:1 classid 1:13 htb $LQ rate ${BK_RATE}kbit ceil ${BE_CEIL}kbit prio 3 `get_htb_adsll_string`
|
|
|
|
$TC qdisc add dev $IFACE parent 1:11 handle 110: $QDISC `get_limit ${ELIMIT}` `get_target "${ETARGET}" ${UPLINK}` `get_ecn ${EECN}` `get_quantum 300` `get_flows ${PRIO_RATE}` ${EQDISC_OPTS}
|
|
$TC qdisc add dev $IFACE parent 1:12 handle 120: $QDISC `get_limit ${ELIMIT}` `get_target "${ETARGET}" ${UPLINK}` `get_ecn ${EECN}` `get_quantum 300` `get_flows ${BE_RATE}` ${EQDISC_OPTS}
|
|
$TC qdisc add dev $IFACE parent 1:13 handle 130: $QDISC `get_limit ${ELIMIT}` `get_target "${ETARGET}" ${UPLINK}` `get_ecn ${EECN}` `get_quantum 300` `get_flows ${BK_RATE}` ${EQDISC_OPTS}
|
|
|
|
|
|
#sm: for testing we need a band to collect PPPOEd packets
|
|
$TC class add dev $IFACE parent 1:1 classid 1:14 htb $LQ rate ${BE_RATE}kbit ceil ${BE_CEIL}kbit prio 2 `get_htb_adsll_string`
|
|
$TC qdisc add dev $IFACE parent 1:14 handle 140: $QDISC `get_limit ${ELIMIT}` `get_target "${ETARGET}" ${UPLINK}` `get_ecn ${EECN}` `get_quantum 300` `get_flows ${BK_RATE}` ${EQDISC_OPTS}
|
|
|
|
|
|
# Need a catchall rule (should also match VLANs and PPPoE packets)
|
|
|
|
$TC filter add dev $IFACE parent 1:0 protocol all prio 999 u32 \
|
|
match ip protocol 0 0x00 flowid 1:12
|
|
|
|
# FIXME should probably change the filter here to do pre-nat
|
|
|
|
$TC filter add dev $IFACE parent 1:0 protocol ip prio 1 handle 1 fw classid 1:11
|
|
$TC filter add dev $IFACE parent 1:0 protocol ip prio 2 handle 2 fw classid 1:12
|
|
$TC filter add dev $IFACE parent 1:0 protocol ip prio 3 handle 3 fw classid 1:13
|
|
|
|
# ipv6 support. Note that the handle indicates the fw mark bucket that is looked for
|
|
|
|
$TC filter add dev $IFACE parent 1:0 protocol ipv6 prio 4 handle 1 fw classid 1:11
|
|
$TC filter add dev $IFACE parent 1:0 protocol ipv6 prio 5 handle 2 fw classid 1:12
|
|
$TC filter add dev $IFACE parent 1:0 protocol ipv6 prio 6 handle 3 fw classid 1:13
|
|
|
|
# Arp traffic
|
|
|
|
$TC filter add dev $IFACE parent 1:0 protocol arp prio 7 handle 1 fw classid 1:11
|
|
|
|
# ICMP traffic - Don't impress your friends. Deoptimize to manage ping floods
|
|
# better instead
|
|
|
|
$TC filter add dev $IFACE parent 1:0 protocol ip prio 8 \
|
|
u32 match ip protocol 1 0xff flowid 1:13
|
|
|
|
$TC filter add dev $IFACE parent 1:0 protocol ipv6 prio 9 \
|
|
u32 match ip protocol 1 0xff flowid 1:13
|
|
|
|
|
|
|
|
|
|
# PPPoE encapsulated packets traversing the router (e.g.: the router does PPPoE termination but we shape
|
|
# on the underlaying ethernet interface instead of the pppoe device)
|
|
|
|
PPPOE_SESSION_ETHERTYPE="0x8864"
|
|
PPPOE_DISCOVERY_ETHERTYPE="0x8863"
|
|
PPP_PROTO_IP4="0x0021"
|
|
PPP_PROTO_IP6="0x0057"
|
|
ARP_PROTO_IP4="0x0806"
|
|
|
|
# NOTE it seems prio can not be reused?
|
|
#$TC filter add dev $IFACE protocol 0x8863 parent 1:0 prio 1 u32 flowid 1:14
|
|
# PPPoE can be selected for by ether_type, the encapsulated IP version from the PPP (0x0021 IPv4, 0x0057 IPv6)
|
|
#U32_PREFIX="$TC filter add dev $IFACE" parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE}"
|
|
|
|
#BE: 1:12 is the default anyway, but this will catch all non marked packets
|
|
#$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 400 u32 \
|
|
# match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
# match u8 0x00 0xfb at 9 \
|
|
# flowid 1:12
|
|
|
|
#AF42
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 401 u32 \
|
|
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
match u8 0x90 0xfc at 9 \
|
|
flowid 1:11
|
|
#EF
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 402 u32 \
|
|
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
match u8 0xb8 0xfc at 9 \
|
|
flowid 1:11
|
|
#CS1
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 403 u32 \
|
|
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
match u8 0x20 0xf0 at 9 \
|
|
flowid 1:13
|
|
#IMM
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 404 u32 \
|
|
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
match u8 0x10 0xf0 at 9 \
|
|
flowid 1:11
|
|
#CS3
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 405 u32 \
|
|
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
match u8 0xc0 0xf0 at 9 \
|
|
flowid 1:11
|
|
#CS6
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 406 u32 \
|
|
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
match u8 0xe0 0xf0 at 9 \
|
|
flowid 1:11
|
|
|
|
|
|
## Arp traffic
|
|
#$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 409 u32 \
|
|
# match u16 ${ARP_PROTO_IP4} 0xffff at 6 \
|
|
# flowid 1:14
|
|
|
|
# ICMP traffic - Don't impress your friends. Deoptimize to manage ping floods
|
|
# better instead; sm: really only deprio echo requestst and echo replies instead?
|
|
# ECHO request, the rest stays in best effort
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 410 u32 \
|
|
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
match u8 0x01 0xff at 17 \
|
|
match u8 0x08 0xff at 28 \
|
|
flowid 1:13
|
|
# ECHO reply
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 410 u32 \
|
|
match u16 ${PPP_PROTO_IP4} 0xffff at 6 \
|
|
match u8 0x01 0xff at 17 \
|
|
match u8 0x00 0xff at 28 \
|
|
flowid 1:13
|
|
|
|
## ICMPv6 133-137 (NDP) is equivalent to IPv4 ARP, so only push echo request and reply into the bulk class
|
|
## 133
|
|
#$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 610 u32 \
|
|
# match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
# match u8 0x85 0xff at 48 \
|
|
# match u8 0x3a 0xff at 14 \
|
|
# flowid 1:14
|
|
## 134
|
|
#$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 610 u32 \
|
|
# match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
# match u8 0x86 0xff at 48 \
|
|
# match u8 0x3a 0xff at 14 \
|
|
# flowid 1:14
|
|
## 135
|
|
#$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 610 u32 \
|
|
# match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
# match u8 0x87 0xff at 48 \
|
|
# match u8 0x3a 0xff at 14 \
|
|
# flowid 1:14
|
|
## 136
|
|
#$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 610 u32 \
|
|
# match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
# match u8 0x88 0xff at 48 \
|
|
# match u8 0x3a 0xff at 14 \
|
|
# flowid 1:14
|
|
## 137
|
|
#$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 610 u32 \
|
|
# match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
# match u8 0x89 0xff at 48 \
|
|
# match u8 0x3a 0xff at 14 \
|
|
# flowid 1:14
|
|
|
|
# ICMPv6 echo request
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 610 u32 \
|
|
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
match u8 0x3a 0xff at 14 \
|
|
match u8 0x80 0xff at 48 \
|
|
flowid 1:13
|
|
# ICMPv6 echo reply
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 610 u32 \
|
|
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
match u8 0x3a 0xff at 14 \
|
|
match u8 0x81 0xff at 48 \
|
|
flowid 1:13
|
|
|
|
|
|
|
|
|
|
#IPV6
|
|
#BE: careful, will override ICMP
|
|
#$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 600 u32 \
|
|
# match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
# match u16 0x0000 0x0fb0 at 8 \
|
|
# flowid 1:12
|
|
#AF42
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 601 u32 \
|
|
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
match u16 0x0900 0x0fc0 at 8 \
|
|
flowid 1:11
|
|
#EF
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 602 u32 \
|
|
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
match u16 0x0b80 0x0fc0 at 8 \
|
|
flowid 1:11
|
|
#CS1
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 603 u32 \
|
|
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
match u16 0x0200 0x0fc0 at 8 \
|
|
flowid 1:13
|
|
#IMM
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 604 u32 \
|
|
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
match u16 0x0100 0x0fc0 at 8 \
|
|
flowid 1:11
|
|
#CS3
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 605 u32 \
|
|
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
match u16 0x0c00 0x0fc0 at 8 \
|
|
flowid 1:11
|
|
#CS6
|
|
$TC filter add dev $IFACE parent 1:0 protocol ${PPPOE_SESSION_ETHERTYPE} prio 606 u32 \
|
|
match u16 ${PPP_PROTO_IP6} 0xffff at 6 \
|
|
match u16 0x0e00 0x0fc0 at 8 \
|
|
flowid 1:11
|
|
|
|
|
|
|
|
|
|
#diffserv $IFACE
|
|
|
|
}
|
|
|
|
ingress() {
|
|
|
|
CEIL=$DOWNLINK
|
|
PRIO_RATE=`expr $CEIL / 3` # Ceiling for prioirty
|
|
BE_RATE=`expr $CEIL / 6` # Min for best effort
|
|
BK_RATE=`expr $CEIL / 6` # Min for background
|
|
BE_CEIL=`expr $CEIL - 16` # A little slop at the top
|
|
|
|
LQ="quantum `get_mtu $IFACE $CEIL`"
|
|
|
|
$TC qdisc del dev $IFACE handle ffff: ingress 2> /dev/null
|
|
$TC qdisc add dev $IFACE handle ffff: ingress
|
|
|
|
$TC qdisc del dev $DEV root 2> /dev/null
|
|
|
|
if [ "$SQUASH_INGRESS" = "1" ]
|
|
then
|
|
sqm_logger "Do not perform DSCP based filtering on ingress. (1-tier classification)"
|
|
# Revert to no dscp based filtering
|
|
$TC qdisc del dev $DEV root 2>/dev/null
|
|
$TC qdisc add dev $DEV root handle 1: `get_stab_string` htb default 10
|
|
$TC class add dev $DEV parent 1: classid 1:1 htb $LQ rate ${DOWNLINK}kbit ceil ${DOWNLINK}kbit `get_htb_adsll_string`
|
|
$TC class add dev $DEV parent 1:1 classid 1:10 htb $LQ rate ${DOWNLINK}kbit ceil ${DOWNLINK}kbit prio 0 `get_htb_adsll_string`
|
|
$TC qdisc add dev $DEV parent 1:10 handle 110: $QDISC `get_limit ${ILIMIT}` `get_target "${ITARGET}" ${DOWNLINK}` `get_ecn ${IECN}` `get_flows ${DOWNLINK}` ${IQDISC_OPTS}
|
|
|
|
else
|
|
sqm_logger "Perform DSCP based filtering on ingress. (3-tier classification)"
|
|
$TC qdisc add dev $DEV root handle 1: `get_stab_string` htb default 12
|
|
$TC class add dev $DEV parent 1: classid 1:1 htb $LQ rate ${CEIL}kbit ceil ${CEIL}kbit `get_htb_adsll_string`
|
|
$TC class add dev $DEV parent 1:1 classid 1:10 htb $LQ rate ${CEIL}kbit ceil ${CEIL}kbit prio 0 `get_htb_adsll_string`
|
|
$TC class add dev $DEV parent 1:1 classid 1:11 htb $LQ rate 32kbit ceil ${PRIO_RATE}kbit prio 1 `get_htb_adsll_string`
|
|
$TC class add dev $DEV parent 1:1 classid 1:12 htb $LQ rate ${BE_RATE}kbit ceil ${BE_CEIL}kbit prio 2 `get_htb_adsll_string`
|
|
$TC class add dev $DEV parent 1:1 classid 1:13 htb $LQ rate ${BK_RATE}kbit ceil ${BE_CEIL}kbit prio 3 `get_htb_adsll_string`
|
|
|
|
# I'd prefer to use a pre-nat filter but that causes permutation...
|
|
|
|
$TC qdisc add dev $DEV parent 1:11 handle 110: $QDISC `get_limit ${ILIMIT}` `get_target "${ITARGET}" ${DOWNLINK}` `get_ecn ${IECN}` `get_quantum 500` `get_flows ${PRIO_RATE}` ${IQDISC_OPTS}
|
|
$TC qdisc add dev $DEV parent 1:12 handle 120: $QDISC `get_limit ${ILIMIT}` `get_target "${ITARGET}" ${DOWNLINK}` `get_ecn ${IECN}` `get_quantum 1500` `get_flows ${BE_RATE}` ${IQDISC_OPTS}
|
|
$TC qdisc add dev $DEV parent 1:13 handle 130: $QDISC `get_limit ${ILIMIT}` `get_target "${ITARGET}" ${DOWNLINK}` `get_ecn ${IECN}` `get_quantum 300` `get_flows ${BK_RATE}` ${IQDISC_OPTS}
|
|
|
|
#sm: for PPPoE packet testing
|
|
$TC class add dev $DEV parent 1:1 classid 1:14 htb $LQ rate ${BK_RATE}kbit ceil ${BE_CEIL}kbit prio 3 `get_htb_adsll_string`
|
|
$TC qdisc add dev $DEV parent 1:14 handle 140: $QDISC `get_limit ${ILIMIT}` `get_target "${ITARGET}" ${DOWNLINK}` `get_ecn ${IECN}` `get_quantum 300` `get_flows ${BK_RATE}` ${IQDISC_OPTS}
|
|
|
|
|
|
|
|
#diffserv $DEV
|
|
diffserv_pppoe $DEV
|
|
|
|
fi
|
|
|
|
ifconfig $DEV up
|
|
|
|
# redirect all IP packets arriving in $IFACE to ifb0
|
|
|
|
$TC filter add dev $IFACE parent ffff: protocol all prio 10 u32 \
|
|
match u32 0 0 flowid 1:1 action mirred egress redirect dev $DEV
|
|
|
|
}
|
|
|
|
do_modules
|
|
ipt_setup
|
|
|
|
if [ "$UPLINK" -ne 0 ];
|
|
then
|
|
egress
|
|
sqm_logger "egress shaping activated"
|
|
else
|
|
sqm_logger "egress shaping deactivated"
|
|
tc qdisc del dev $IFACE root 2> /dev/null
|
|
fi
|
|
if [ "$DOWNLINK" -ne 0 ];
|
|
then
|
|
ingress
|
|
sqm_logger "ingress shaping activated"
|
|
else
|
|
sqm_logger "ingress shaping deactivated"
|
|
tc qdisc del dev $DEV root 2> /dev/null
|
|
tc qdisc del dev $IFACE ingress 2> /dev/null
|
|
fi
|
|
|
|
|
|
|
|
# References:
|
|
# This alternate shaper attempts to go for 1/u performance in a clever way
|
|
# http://git.coverfire.com/?p=linux-qos-scripts.git;a=blob;f=src-3tos.sh;hb=HEAD
|
|
|
|
# Comments
|
|
# This does the right thing with ipv6 traffic.
|
|
# It also tries to leverage diffserv to some sane extent. In particular,
|
|
# the 'priority' queue is limited to 33% of the total, so EF, and IMM traffic
|
|
# cannot starve other types. The rfc suggested 30%. 30% is probably
|
|
# a lot in today's world.
|
|
|
|
# Flaws
|
|
# Many!
|