LILiK
/
openwrt-packages-dist


								# User authentication method. Could be set multiple times and in that case

								# all should succeed.

								# Options: certificate, pam.

								#auth = "certificate"

								#auth = "pam"


								# The gid-min option is used by auto-select-group option, in order to

								# select the minimum group ID.

								#auth = "pam[gid-min=1000]"


								# The plain option requires specifying a password file which contains

								# entries of the following format.

								# "username:groupname:encoded-password"

								# One entry must be listed per line, and 'ocpasswd' can be used

								# to generate password entries.

								auth = "|AUTH|"


								# A banner to be displayed on clients

								banner = "Welcome to OpenWRT"


								#isolate-workers = true


								# When the server has a dynamic DNS address (that may change),

								# should set that to true to ask the client to resolve again on

								# reconnects.

								listen-host-is-dyndns = |DYNDNS|


								# Use listen-host to limit to specific IPs or to the IPs of a provided

								# hostname.

								#listen-host = [IP|HOSTNAME]


								# Limit the number of clients. Unset or set to zero for unlimited.

								#max-clients = 1024

								max-clients = |MAX_CLIENTS|


								# Limit the number of client connections to one every X milliseconds

								# (X is the provided value). Set to zero for no limit.

								rate-limit-ms = 100


								# Limit the number of identical clients (i.e., users connecting

								# multiple times). Unset or set to zero for unlimited.

								max-same-clients = |MAX_SAME|


								# TCP and UDP port number

								tcp-port = |PORT|

								|UDP|udp-port = |PORT|


								# Stats report time. The number of seconds after which each

								# worker process will report its usage statistics (number of

								# bytes transferred etc). This is useful when accounting like

								# radius is in use.

								#stats-report-time = 360


								# Keepalive in seconds

								keepalive = 32400


								# Dead peer detection in seconds.

								dpd = |DPD|


								# Dead peer detection for mobile clients. The needs to

								# be much higher to prevent such clients being awaken too

								# often by the DPD messages, and save battery.

								# (clients that send the X-AnyConnect-Identifier-DeviceType)

								mobile-dpd = 1800


								# If using DTLS, and no UDP traffic is received for this

								# many seconds, attempt to send future traffic over the TCP

								# connection instead, in an attempt to wake up the client

								# in the case that there is a NAT and the UDP translation

								# was deleted. If this is unset, do not attempt to use this

								# recovery mechanism.

								switch-to-tcp-timeout = 25


								# MTU discovery (DPD must be enabled)

								try-mtu-discovery = false


								# The key and the certificates of the server

								# The key may be a file, or any URL supported by GnuTLS (e.g.,

								# tpmkey:uuid=xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx;storage=user

								# or pkcs11:object=my-vpn-key;object-type=private)

								#

								# There may be multiple certificate and key pairs and each key

								# should correspond to the preceding certificate.

								server-cert = /etc/ocserv/server-cert.pem

								server-key = /etc/ocserv/server-key.pem


								# Diffie-Hellman parameters. Only needed if you require support

								# for the DHE ciphersuites (by default this server supports ECDHE).

								# Can be generated using:

								# certtool --generate-dh-params --outfile /path/to/dh.pem

								#dh-params = /path/to/dh.pem


								# If you have a certificate from a CA that provides an OCSP

								# service you may provide a fresh OCSP status response within

								# the TLS handshake. That will prevent the client from connecting

								# independently on the OCSP server.

								# You can update this response periodically using:

								# ocsptool --ask --load-cert=your_cert --load-issuer=your_ca --outfile response

								# Make sure that you replace the following file in an atomic way.

								#ocsp-response = /path/to/ocsp.der


								# In case PKCS #11 or TPM keys are used the PINs should be available

								# in files. The srk-pin-file is applicable to TPM keys only, and is the

								# storage root key.

								#pin-file = /path/to/pin.txt

								#srk-pin-file = /path/to/srkpin.txt


								# The Certificate Authority that will be used to verify

								# client certificates (public keys) if certificate authentication

								# is set.

								#ca-cert = /etc/ocserv/ca.pem


								# The object identifier that will be used to read the user ID in the client

								# certificate. The object identifier should be part of the certificate's DN

								# Useful OIDs are:

								#  CN = 2.5.4.3, UID = 0.9.2342.19200300.100.1.1

								#cert-user-oid = 0.9.2342.19200300.100.1.1


								# The object identifier that will be used to read the user group in the

								# client  certificate. The object identifier should be part of the certificate's

								# DN. Useful OIDs are:

								#  OU (organizational unit) = 2.5.4.11

								#cert-group-oid = 2.5.4.11


								# The revocation list of the certificates issued by the 'ca-cert' above.

								#crl = /etc/ocserv/crl.pem


								# Uncomment this to enable compression negotiation (LZS, LZ4).

								|COMPRESSION|compression = true


								# GnuTLS priority string

								tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-VERS-SSL3.0"


								# To enforce perfect forward secrecy (PFS) on the main channel.

								#tls-priorities = "NORMAL:%SERVER_PRECEDENCE:%COMPAT:-VERS-SSL3.0:-RSA"


								# The time (in seconds) that a client is allowed to stay connected prior

								# to authentication

								auth-timeout = 40


								# The time (in seconds) that a client is allowed to stay idle (no traffic)

								# before being disconnected. Unset to disable.

								#idle-timeout = 1200


								# The time (in seconds) that a mobile client is allowed to stay idle (no

								# traffic) before being disconnected. Unset to disable.

								#mobile-idle-timeout = 2400


								# The time (in seconds) that a client is not allowed to reconnect after

								# a failed authentication attempt.

								min-reauth-time = 360


								# Banning clients in ocserv works with a point system. IP addresses

								# that get a score over that configured number are banned for

								# min-reauth-time seconds. By default a wrong password attempt is 10 points,

								# a KKDCP POST is 1 point, and a connection is 1 point. Note that

								# due to difference processes being involved the count of points

								# will not be real-time precise.

								#

								# Score banning cannot be reliably used when receiving proxied connections

								# locally from an HTTP server (i.e., when listen-clear-file is used).

								#

								# Set to zero to disable.

								max-ban-score = 50


								# The time (in seconds) that all score kept for a client is reset.

								ban-reset-time = 300


								# In case you'd like to change the default points.

								#ban-points-wrong-password = 10

								#ban-points-connection = 1

								#ban-points-kkdcp = 1


								# Cookie timeout (in seconds)

								# which he can reconnect. That cookie will be invalided if not

								# used within this timeout value. On a user disconnection, that

								# cookie will also be active for this time amount prior to be

								# invalid. That should allow a reasonable amount of time for roaming

								# between different networks.

								cookie-timeout = 300


								# Whether roaming is allowed, i.e., if true a cookie is

								# restricted to a single IP address and cannot be re-used

								# from a different IP.

								deny-roaming = false


								# ReKey time (in seconds)

								# ocserv will ask the client to refresh keys periodically once

								# this amount of seconds is elapsed. Set to zero to disable.

								rekey-time = 172800


								# ReKey method

								# Valid options: ssl, new-tunnel

								#  ssl: Will perform an efficient rehandshake on the channel allowing

								#       a seamless connection during rekey.

								#  new-tunnel: Will instruct the client to discard and re-establish the channel.

								#       Use this option only if the connecting clients have issues with the ssl

								#       option.

								rekey-method = ssl


								# Script to call when a client connects and obtains an IP

								# Parameters are passed on the environment.

								# REASON, USERNAME, GROUPNAME, HOSTNAME (the hostname selected by client),

								# DEVICE, IP_REAL (the real IP of the client), IP_LOCAL (the local IP

								# in the P-t-P connection), IP_REMOTE (the VPN IP of the client),

								# ID (a unique numeric ID); REASON may be "connect" or "disconnect".


								# These scripts are not needed if you have setup an interface for all vpns+

								# devices.

								#connect-script = /usr/bin/ocserv-script

								#disconnect-script = /usr/bin/ocserv-script


								# UTMP

								use-utmp = false


								# Whether to enable support for the occtl tool (i.e., either through D-BUS,

								# or via a unix socket).

								use-occtl = true


								# socket file used for IPC with occtl. You only need to set that,

								# if you use more than a single servers.

								occtl-socket-file = /var/run/occtl.socket


								# PID file. It can be overriden in the command line.

								pid-file = /var/run/ocserv.pid


								# The default server directory. Does not require any devices present.

								chroot-dir = /var/lib/ocserv


								# socket file used for IPC, will be appended with .PID

								# It must be accessible within the chroot environment (if any)

								#socket-file = /var/run/ocserv-socket

								socket-file = ocserv-socket


								# The user the worker processes will be run as. It should be

								# unique (no other services run as this user).

								run-as-user = ocserv

								run-as-group = ocserv


								# Set the protocol-defined priority (SO_PRIORITY) for packets to

								# be sent. That is a number from 0 to 6 with 0 being the lowest

								# priority. Alternatively this can be used to set the IP Type-

								# Of-Service, by setting it to a hexadecimal number (e.g., 0x20).

								# This can be set per user/group or globally.

								#net-priority = 3


								# Set the VPN worker process into a specific cgroup. This is Linux

								# specific and can be set per user/group or globally.

								#cgroup = "cpuset,cpu:test"


								#

								# Network settings

								#


								# The name of the tun device

								device = vpns


								# Whether the generated IPs will be predictable, i.e., IP stays the

								# same for the same user when possible.

								predictable-ips = |PREDICTABLE_IPS|


								# The default domain to be advertised

								|ENABLE_DEFAULT_DOMAIN|default-domain = |DEFAULT_DOMAIN|


								# The pool of addresses that leases will be given from.

								ipv4-network = |IPV4ADDR|

								ipv4-netmask = |NETMASK|


								# The advertized DNS server. Use multiple lines for

								# multiple servers.

								# dns = fc00::4be0

								#dns = 192.168.1.2


								# The NBNS server (if any)

								#nbns = 192.168.1.3


								# The IPv6 subnet that leases will be given from.

								|ENABLE_IPV6|ipv6-network = |IPV6ADDR|


								# The domains over which the provided DNS should be used. Use

								# multiple lines for multiple domains.

								|ENABLE_SPLIT_DNS|split-dns = |DEFAULT_DOMAIN|


								# Prior to leasing any IP from the pool ping it to verify that

								# it is not in use by another (unrelated to this server) host.

								ping-leases = |PING_LEASES|


								# Unset to assign the default MTU of the device

								# mtu =


								# Unset to enable bandwidth restrictions (in bytes/sec). The

								# setting here is global, but can also be set per user or per group.

								#rx-data-per-sec = 40000

								#tx-data-per-sec = 40000


								# The number of packets (of MTU size) that are available in

								# the output buffer. The default is low to improve latency.

								# Setting it higher will improve throughput.

								#output-buffer = 10


								# Routes to be forwarded to the client. If you need the

								# client to forward routes to the server, you may use the

								# config-per-user/group or even connect and disconnect scripts.

								#

								# To set the server as the default gateway for the client just

								# comment out all routes from the server.

								#route = 192.168.1.0/255.255.255.0

								#route = 192.168.5.0/255.255.255.0

								#route = fef4:db8:1000:1001::/64


								# Configuration files that will be applied per user connection or

								# per group. Each file name on these directories must match the username

								# or the groupname.

								# The options allowed in the configuration files are dns, nbns,

								#  ipv?-network, ipv4-netmask, ipv6-prefix, rx/tx-per-sec, iroute, route,

								#  net-priority and cgroup.

								#

								# Note that the 'iroute' option allows to add routes on the server

								# based on a user or group. The syntax depends on the input accepted

								# by the commands route-add-cmd and route-del-cmd (see below).


								config-per-user = /etc/ocserv/config-per-user/

								config-per-group = /etc/ocserv/config-per-group/


								# When config-per-xxx is specified and there is no group or user that

								# matches, then utilize the following configuration.


								#default-user-config = /etc/ocserv/defaults/user.conf

								#default-group-config = /etc/ocserv/defaults/group.conf


								# Groups that a client is allowed to select from.

								# A client may belong in multiple groups, and in certain use-cases

								# it is needed to switch between them. For these cases the client can

								# select prior to authentication. Add multiple entries for multiple groups.

								#select-group = group1

								#select-group = group2[My group 2]

								#select-group = tost[The tost group]


								# The name of the group that if selected it would allow to use

								# the assigned by default group.

								#default-select-group = DEFAULT


								# Instead of specifying manually all the allowed groups, you may instruct

								# ocserv to scan all available groups and include the full list. That

								# option is only functional on plain authentication.

								#auto-select-group = true


								# The system command to use to setup a route. %{R} will be replaced with the

								# route/mask and %{D} with the (tun) device.

								#

								# The following example is from linux systems. %{R} should be something

								# like 192.168.2.0/24


								#route-add-cmd = "/usr/sbin/ip route add %{R} dev %{D}"

								#route-del-cmd = "/usr/sbin/ip route delete %{R} dev %{D}"


								route-add-cmd = "/sbin/route add -net %{RI} dev %{D}"

								route-del-cmd = "/sbin/route del -net %{RI} dev %{D}"


								# This option allows to forward a proxy. The special strings '%{U}'

								# and '%{G}', if present will be replaced by the username and group name.

								#proxy-url = http://example.com/

								#proxy-url = http://example.com/%{U}/%{G}/hello


								#

								# The following options are for (experimental) AnyConnect client

								# compatibility.


								# Client profile xml. A sample file exists in doc/profile.xml.

								# This file must be accessible from inside the worker's chroot.

								# It is not used by the openconnect client.

								#user-profile = profile.xml


								# Binary files that may be downloaded by the CISCO client. Must

								# be within any chroot environment.

								#binary-files = /path/to/binaries


								# Unless set to false it is required for clients to present their

								# certificate even if they are authenticating via a previously granted

								# cookie and complete their authentication in the same TCP connection.

								# Legacy CISCO clients do not do that, and thus this option should be

								# set for them.

								cisco-client-compat = |CISCO_COMPAT|


								#Advanced options


								# Option to allow sending arbitrary custom headers to the client after

								# authentication and prior to VPN tunnel establishment.

								#custom-header = "X-My-Header: hi there"


								expose-iroutes = true