# # Sample Coova-Chilli configuration file # config chilli # disable to running chilli. remove this option before running. option disabled 1 # name of TUN device name. required. option tundev 'tun0' # name of network interface option network '' # Include this flag if process is to run in the foreground #option fg # Include this flag to include debug information. #option debug 9 # Re-read configuration file at this interval. Will also cause new domain # name lookups to be performed. Value is given in seconds. #option interval 3600 # File to store information about the process id of the program. # The program must have write access to this file/directory. #option pidfile /var/run/chilli.pid # Directory to use for nonvolatile storage. # The program must have write access to this directory. # this option is currently ignored #option statedir ./ # TUN parameters # IP network address of external packet data network # Used to allocate dynamic IP addresses and set up routing. # Normally you do not need to uncomment this option. #option net 192.168.182.0/24 # Dynamic IP address pool # Used to allocate dynamic IP addresses to clients. # If not set it defaults to the net tag. # Do not uncomment this option unless you are an experienced user! #option dynip 192.168.182.0/24 # Static IP address pool # Used to allocate static IP addresses to clients. # Do not uncomment this option unless you are an experienced user! #option statip 192.168.182.0/24 # Primary DNS server. # Will be suggested to the client. # If omitted the system default will be used. # Normally you do not need to uncomment this option. #option dns1 172.16.0.5 # Secondary DNS server. # Will be suggested to the client. # If omitted the system default will be used. # Normally you do not need to uncomment this option. #option dns2 172.16.0.6 # Domain name # Will be suggested to the client. # Normally you do not need to uncomment this option. #option domain key.chillispot.org # Script executed after network interface has been brought up. # Executed with the following parameters: # # Normally you do not need to modify this option. option ipup /etc/chilli/up.sh # Script executed after network interface has been taken down. # Executed with the following parameters: # # Normally you do not need to modify this option. option ipdown /etc/chilli/down.sh # Radius parameters # IP address to listen to # Normally you do not need to uncomment this option. #option radiuslisten 127.0.0.1 # IP address of radius server 1 # For most installations you need to modify this option. option radiusserver1 rad01.chillispot.org # IP address of radius server 2 # If you have only one radius server you should set radiusserver2 to the # same value as radiusserver1. # For most installations you need to modify this option. option radiusserver2 rad02.chillispot.org # Radius authentication port # The UDP port number to use for radius authentication requests. # The same port number is used for both radiusserver1 and radiusserver2. # Normally you do not need to uncomment this option. #option radiusauthport 1812 # Radius accounting port # The UDP port number to use for radius accounting requests. # The same port number is used for both radiusserver1 and radiusserver2. # Normally you do not need to uncomment this option. #option radiusacctport 1813 # Radius shared secret for both servers # For all installations you should modify this option. #option radiussecret testing123 # Radius NAS-Identifier # Normally you do not need to uncomment this option. #option radiusnasid nas01 # WISPr Location ID. Should be in the format: isocc=, # cc=,ac=,network= # Normally you do not need to uncomment this option. #option radiuslocationid isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport # WISPr Location Name. Should be in the format: # , # Normally you do not need to uncomment this option. #option radiuslocationname ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport # Radius proxy parameters # IP address to listen to # Normally you do not need to uncomment this option. #option proxylisten 10.0.0.1 # UDP port to listen to. # If not specified a port will be selected by the system # Normally you do not need to uncomment this option. #option proxyport 1645 # Client(s) from which we accept radius requests # Normally you do not need to uncomment this option. #option proxyclient 10.0.0.1/24 # Radius proxy shared secret for all clients # If not specified defaults to radiussecret # Normally you do not need to uncomment this option. #option proxysecret testing123 # DHCP Parameters # Ethernet interface to listen to. # This is the network interface which is connected to the access points. # In a typical configuration this option should be set to eth1. option dhcpif eth1 # Use specified MAC address. # An address in the range 00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls # within the IANA range of addresses and is not allocated for other # purposes. # Normally you do not need to uncomment this option. #option dhcpmac 00:00:5E:00:02:00 # Time before DHCP lease expires # Normally you do not need to uncomment this option. #option lease 600 # Universal access method (UAM) parameters # URL of web server handling authentication. option uamserver https://radius.chillispot.org/hotspotlogin # URL of welcome homepage. # Unauthenticated users will be redirected to this URL. If not specified # users will be redirected to the uamserver instead. # Normally you do not need to uncomment this option. #option uamhomepage http://192.168.182.1/welcome.html # Shared between chilli and authentication web server #option uamsecret ht2eb8ej6s4et3rg1ulp # IP address to listen to for authentication requests # Do not uncomment this option unless you are an experienced user! #option uamlisten 192.168.182.1 # TCP port to listen to for authentication requests # Do not uncomment this option unless you are an experienced user! #option uamport 3990 # Comma separated list of domain names, IP addresses or network segments # the client can access without first authenticating. # It is possible to specify this option multiple times. # Normally you do not need to uncomment this option. #option uamallowed www.chillispot.org,10.11.12.0/24 # Comma separated list of domain names # the client can access without first authenticating. # It is possible to specify this option multiple times. # Normally you do not need to uncomment this option. #option uamdomain .chillispot.org,.coova.org # If this flag is given unauthenticated users are allowed to use # any DNS server. # Normally you do not need to uncomment this option. #option uamanydns # MAC authentication # If this flag is given users will be authenticated only on their MAC # address. # Normally you do not need to uncomment this option. #option macauth # List of MAC addresses. # The MAC addresses specified in this list will be authenticated only on # their MAC address. # this option is ignored if the macauth tag is given. # It is possible to specify this option multiple times. # Normally you do not need to uncomment this option. #option macallowed 00-0A-5E-AC-BE-51,00-30-1B-3C-32-E9 # Password to use for MAC authentication. # Normally you do not need to uncomment this option. #option macpasswd password # Suffix to add to MAC address in order to form the username. # Normally you do not need to uncomment this option. #option macsuffix suffix