#!/bin/sh /etc/rc.common

START=50
USE_PROCD=1

setup_config() {
	config_get port         $1 port "4443"
	config_get max_clients  $1 max_clients "8"
	config_get max_same     $1 max_same "2"
	config_get dpd          $1 dpd "120"
	config_get predictable_ips  $1 predictable_ips "1"
	config_get compression  $1 compression "0"
	config_get udp          $1 udp "1"
	config_get auth         $1 auth "plain"
	config_get cisco_compat $1 cisco_compat "1"
	config_get ipaddr       $1 ipaddr ""
	config_get netmask      $1 netmask ""
	config_get ip6addr      $1 ip6addr ""
	config_get proxy_arp    $1 proxy_arp "0"
	config_get ping_leases  $1 ping_leases "0"
	config_get default_domain  $1 default_domain ""

	# Enable proxy arp, and make sure that ping leases is set to true in that case,
	# to prevent conflicts.
	if test "$proxy_arp" = 1;then
		local ip
		# IP address is empty. Auto-configure LAN + VPN.
		if test -z "$ipaddr";then
			local mask
			mask=$(uci get network.lan.netmask)
			if test "$mask" = "255.255.255.0";then
				uci set dhcp.lan.start=100
				uci set dhcp.lan.limit=91
			fi
			ip=$(uci get network.lan.ipaddr)
			ipaddr="$(echo $ip|cut -d . -f1,2,3).192"
			netmask="255.255.255.192"
			uci set ocserv.config.ipaddr="$ipaddr"
			uci set ocserv.config.netmask="$netmask"
			uci commit
		fi

		if test -z "$ip6addr";then
			ip6addr=$(uci get network.lan.ip6addr 2>/dev/null)
			test -n "$ip6addr" && uci set ocserv.config.ip6addr="$ip6addr"
			uci commit
		fi

		ping_leases=1
		test -n "$ipaddr" && sysctl -w "net.ipv4.conf.$(uci get network.lan.ifname).proxy_arp"=1 >/dev/null
		test -n "$ip6addr" && sysctl -w "net.ipv6.conf.$(uci get network.lan.ifname).proxy_ndp"=1 >/dev/null
	else
		test "$ipaddr" = "" && ipaddr="192.168.100.0"
		test "$netmask" = "" && ipaddr="255.255.255.0"
	fi

	enable_default_domain="#"
	enable_udp="#"
	enable_compression="#"
	test $predictable_ips = "0" && predictable_ips="false"
	test $predictable_ips = "1" && predictable_ips="true"
	test $cisco_compat = "0" && cisco_compat="false"
	test $cisco_compat = "1" && cisco_compat="true"
	test $ping_leases = "0" && ping_leases="false"
	test $ping_leases = "1" && ping_leases="true"
	test $udp = "1" && enable_udp=""
	test $compression = "1" && enable_compression=""
	test -z $default_domain && enable_default_domain=""
	test -z $ip6addr && enable_ipv6="#"

	test $auth = "plain" && authsuffix="\[passwd=/var/etc/ocpasswd\]"

	dyndns="false"
	hostname=`uci show ddns 2>/dev/null|grep domain|head -1|cut -d '=' -f 2`
	[ -n "$hostname" ] && dyndns="true"

	mkdir -p /var/etc
	sed -e "s/|PORT|/$port/g" \
	    -e "s/|MAX_CLIENTS|/$max_clients/g" \
	    -e "s/|MAX_SAME|/$max_same/g" \
	    -e "s/|DPD|/$dpd/g" \
	    -e "s#|AUTH|#$auth$authsuffix#g" \
	    -e "s#|DYNDNS|#$dyndns#g" \
	    -e "s/|PREDICTABLE_IPS|/$predictable_ips/g" \
	    -e "s/|DEFAULT_DOMAIN|/$default_domain/g" \
	    -e "s/|ENABLE_DEFAULT_DOMAIN|/$enable_default_domain/g" \
	    -e "s/|CISCO_COMPAT|/$cisco_compat/g" \
	    -e "s/|PING_LEASES|/$ping_leases/g" \
	    -e "s/|UDP|/$enable_udp/g" \
	    -e "s/|COMPRESSION|/$enable_compression/g" \
	    -e "s/|IPV4ADDR|/$ipaddr/g" \
	    -e "s/|NETMASK|/$netmask/g" \
	    -e "s#|IPV6ADDR|#$ip6addr#g" \
	    -e "s/|ENABLE_IPV6|/$enable_ipv6/g" \
	    /etc/ocserv/ocserv.conf.template > /var/etc/ocserv.conf

	test -f /etc/ocserv/ocserv.conf.local && cat /etc/ocserv/ocserv.conf.local >> /var/etc/ocserv.conf
}

setup_users() {
	local name
	local group
	local password

	config_get name $1 name
	config_get group $1 group '*'
	config_get password $1 password

	[ -z "$name" -o -z "$password" ] && return

	echo "$name:$group:$password" >> /var/etc/ocpasswd
}

setup_routes() {
	local routes

	config_get ip $1 ip
	config_get netmask $1 netmask

	[ -z "$ip" -o -z "$netmask" ] && return

	echo "route = $ip/$netmask" >> /var/etc/ocserv.conf
}

setup_dns() {
	local routes

	config_get ip $1 ip

	[ -z "$ip" ] && return

	echo "dns = $ip" >> /var/etc/ocserv.conf
}

start_service() {
	local hostname iface

	hostname=`uci show ddns 2>/dev/null|grep domain|head -1|cut -d '=' -f 2`
	[ -z "$hostname" ] && hostname=`uci get system.@system[0].hostname 2>/dev/null`

	[ -f /etc/config/ocserv-dir/ca-key.pem ] && mv /etc/config/ocserv-dir/ca-key.pem /etc/ocserv/ca-key.pem
	[ -f /etc/config/ocserv-dir/ca.pem ] && mv /etc/config/ocserv-dir/ca.pem /etc/ocserv/ca.pem
	[ -f /etc/config/ocserv-dir/server-key.pem ] && mv /etc/config/ocserv-dir/server-key.pem /etc/ocserv/server-key.pem
	[ -f /etc/config/ocserv-dir/server-cert.pem ] && mv /etc/config/ocserv-dir/server-cert.pem /etc/ocserv/server-cert.pem 
	[ -d /etc/config/ocserv-dir ] && rmdir /etc/config/ocserv-dir

	[ ! -f /etc/ocserv/ca-key.pem ] && [ -x /usr/bin/certtool ] && {
		logger -t ocserv "Generating CA certificate..."
		mkdir -p /etc/ocserv/pki/
		certtool --bits 2048 --generate-privkey --outfile /etc/ocserv/ca-key.pem >/dev/null 2>&1
		echo "cn=$hostname CA" >/etc/ocserv/pki/ca.tmpl
		echo "expiration_days=-1" >>/etc/ocserv/pki/ca.tmpl
		echo "serial=1" >>/etc/ocserv/pki/ca.tmpl
		echo "ca" >>/etc/ocserv/pki/ca.tmpl
		echo "cert_signing_key" >>/etc/ocserv/pki/ca.tmpl

		certtool --template /etc/ocserv/pki/ca.tmpl \
			--generate-self-signed --load-privkey /etc/ocserv/ca-key.pem \
			--outfile /etc/ocserv/ca.pem >/dev/null 2>&1
	}

	#generate server certificate/key
	[ ! -f /etc/ocserv/server-key.pem ] && [ -x /usr/bin/certtool ] && {
		logger -t ocserv "Generating server certificate..."
		mkdir -p /etc/ocserv/pki/
		certtool --bits 2048 --generate-privkey --outfile /etc/ocserv/server-key.pem >/dev/null 2>&1
		echo "cn=$hostname" >/etc/ocserv/pki/server.tmpl
		echo "serial=2" >>/etc/ocserv/pki/server.tmpl
		echo "expiration_days=-1" >>/etc/ocserv/pki/server.tmpl
		echo "signing_key" >>/etc/ocserv/pki/server.tmpl
		echo "encryption_key" >>/etc/ocserv/pki/server.tmpl
		certtool --template /etc/ocserv/pki/server.tmpl \
			--generate-certificate --load-privkey /etc/ocserv/server-key.pem \
			--load-ca-certificate /etc/ocserv/ca.pem --load-ca-privkey \
			/etc/ocserv/ca-key.pem --outfile /etc/ocserv/server-cert.pem >/dev/null 2>&1
	}

	[ -f /var/run/ocserv.pid ] || {
		touch /var/run/ocserv.pid
		chown ocserv:ocserv /var/run/ocserv.pid
	}
	[ -d /var/lib/ocserv ] || {
		mkdir -m 0755 -p /var/lib/ocserv
		chmod 0700 /var/lib/ocserv
		chown ocserv:ocserv /var/lib/ocserv
	}

	config_load "ocserv"

	rm -f /var/etc/ocserv.conf
	touch /var/etc/ocserv.conf
	setup_config config
	config_foreach setup_routes routes
	config_foreach setup_dns dns

	rm -f /var/etc/ocpasswd
	touch /var/etc/ocpasswd
	chmod 600 /var/etc/ocpasswd
	config_foreach setup_users ocservusers

	procd_open_instance
	procd_set_param command /usr/sbin/ocserv -f -c /var/etc/ocserv.conf
	procd_set_param respawn
	procd_close_instance
}