config options 'tgt'
# iothreads limits number of worker threads per rdwr target, default is 16
# which seems to be too much for an avarage router
	option iothreads '2'
#	option nop_count '3'
#	option nop_interval '1'
#	list portal '[::1]'
#	list portal '127.0.0.1:3261'
#	list portal '0.0.0.0:3262'
#	list portal '[::]:3263'

config target 1
	option name 'iqn.2012-06.org.openwrt:target1'
#	list allow_name 'iqn.1994-05.org.example:fedcba987654'
#	list allow_address '192.168.2.128/27'

#config target 2
#	option name 'iqn.2012-06.org.openwrt:t2'

# all options are set to default, except for the device
# lun "name" is constructed as TGTID_LUN
#config lun                        1_1
#	option 'device' '/dev/sda'
# type of scsi device. available options: disk, cd, pt (sg passthrough)
#	option 'type' 'disk'
# backing store access method: rdwr (read-write), aio (async IO), sg (for pt type only, device must be /dev/sgN)
#	option 'bstype' 'aio'
# set sync and/or direct flags when opening device, affect only rdwr
#	option 'sync' '0'
#	option 'direct' '0'
# block size for lun, default is 512
#	option 'blocksize' 4096
# override SCSI mode page, see tgtadm man page for details
#	option 'mode_page' 'string'
# vendor, product, revision, SCSI ID and SCSI Serial number
#	option 'vendor_id' 'string'
#	option 'product_id' 'string'
#	option 'product_rev' 'string'
#	option 'scsi_id' 'string'
#	option 'scsi_sn' 'string'
# refuse write attempts. applies only to disk type
#	option 'readonly' '0'
# Disk devices default to non-removable, cd - to removable
#	option 'removable' '0'
#  0 = Classic sense format, 1 = Support descriptor format.
#	option 'sense_format' '0'
# Rotaion rate: 0: not reported, 1: non-rotational medium (SSD), 2-1024: reserverd, 1025+: "Nominal rotation rate"
#	option 'rotation_rate' '0'

#config lun 2_1
#	option device /mnt/iscsi.img

#config lun 2_2
#	option device /dev/sdc

#config account
#	list target 1
#	list target 2
#	option user "username1"
#	option password "pass1"

#config account
#	option target 2
#	option user "user2"
#	option password "pwd2"
#	option outgoing 1