# VPN Bypass

A simple [procd](https://openwrt.org/docs/techref/procd)-based ```vpnbypass``` service for OpenWrt/LEDE Project. This is useful if your router accesses Internet through a VPN client/tunnel, but you want specific traffic (ports, IP ranges, domains or local IP ranges) to be routed outside of this tunnel.

## Features

- Define local ports so traffic to them is routed outside of the VPN tunnel (by default it routes Plex Media Server traffic (port 32400) outside of the VPN tunnel).
- Define IPs/subnets in local networks so their traffic is routed outside the VPN tunnel (by default it routes traffic from 192.168.1.81-192.168.1.87 outside the VPN tunnel).
- Define remote IP ranges that are accessed outside the VPN tunnel (by default, LogmeIn Hamachi traffic (25.0.0.0/8) is routed outside the VPN tunnel).
- Creates list of domain names which should be accessed outside the VPN tunnel (useful for Netflix, Hulu, etc).
- Does not reside in RAM -- creates `iptables` rules which are automatically updated on WAN up/down events.
- A companion package (`luci-app-vpnbypass`) is provided so all features may be configured from the Web UI.
- Proudly made in Canada, using locally-sourced electrons.

## Screenshot (luci-app-vpnbypass)

![screenshot](https://raw.githubusercontent.com/stangri/openwrt_packages/master/screenshots/vpnbypass/screenshot02.png "screenshot")

## Requirements

This service requires the following packages to be installed on your router: ```ipset``` and ```iptables```. Additionally, if you want to use the Domain Bypass feature, you need to install ```dnsmasq-full``` (```dnsmasq-full``` requires you uninstall ```dnsmasq``` first).

To fully satisfy the requirements for both IP/Port VPN Bypass and Domain Bypass features connect via ssh to your router and run the following commands:

```sh
opkg update; opkg remove dnsmasq; opkg install ipset iptables dnsmasq-full
```

To satisfy the requirements for just IP/Port VPN Bypass connect to your router via ssh and run the following commands:

```sh
opkg update; opkg install ipset iptables
```

### Unmet dependencies

If you are running a development (trunk/snapshot) build of OpenWrt/LEDE Project on your router and your build is outdated (meaning that packages of the same revision/commit hash are no longer available and when you try to satisfy the [requirements](#requirements) you get errors), please flash either current LEDE release image or current development/snapshot image.

## How to install

<!---
#### From Web UI/Luci
Navigate to System->Software page on your router and then perform the following actions:
1. Click "Update Lists"
2. Wait for the update process to finish.
3. In the "Download and install package:" field type ```vpnbypass luci-app-vpnbypass```
4. Click "OK" to install ```vpnbypass``` and ```luci-app-vpnbypass```

If you get an ```Unknown package 'vpnbypass'``` error, your router is not set up with the access to a repository containing these packages and you need to add the custom repository to your router first.

#### From console/ssh
--->
Please ensure that the [requirements](#requirements) are satisfied and install ```vpnbypass``` and ```luci-app-vpnbypass``` from the Web UI or connect to your router via ssh and run the following commands:

```sh
opkg update
opkg install vpnbypass luci-app-vpnbypass
```

If these packages are not found in the official feed/repo for your version of OpenWrt/LEDE Project, you will need to [add a custom repo to your router](https://github.com/stangri/openwrt_packages/blob/master/README.md#on-your-router) first.

## Default Settings

The default configuration ships with the service disabled, use the Web UI to enable/start the service or run ```uci set vpnbypass.config.enabled=1; uci commit vpnbypass;```. It routes Plex Media Server traffic (port 32400) and LogmeIn Hamachi traffic (25.0.0.0/8) outside of the VPN tunnel. Internet traffic from local IPs `192.168.1.81-192.168.1.87` is also routed outside the VPN tunnel. You can safely delete these example rules if they do not apply to you.

## Documentation / Discussion

Please head to [OpenWrt Forum](https://forum.openwrt.org/t/vpn-bypass-split-tunneling-service-luci-ui/1106) for discussions of this service.

### Bypass Domains Format/Syntax

Domain lists should be in the following format/syntax: ```/domain1.com/domain2.com/vpnbypass```. Please do not forget the leading ```/``` and trailing ```/vpnbypass```. There is no validation if you enter something incorrectly -- it simply will not work. Please see [Notes/Known Issues](#notesknown-issues) if you wish to edit this setting manually, without using the Web UI.

## What's New

1.3.0:

- No longer depends on hardcoded WAN interface name (```wan```) works with other interface names (like ```wwan```).
- Table ID, IPSET name and FW_MARK as well as FW_MASK can be defined in config file.
- Uses iptables, not ip rules for handling local IPs/ranges.
- More reliable creation/destruction of VPNBYPASS iptables chain.
- Updated Web UI enables, starts and stops the service.

## Notes/Known Issues

1. Domains to be accessed outside of VPN tunnel are handled by dnsmasq and thus are not defined in ```/etc/config/vpnpass```, but rather in ```/etc/config/dhcp```. To add/delete/edit domains you can use VPN Bypass Web UI or you can edit ```/etc/config/dhcp``` manually or run the following commands:

```sh
uci add_list dhcp.@dnsmasq[-1].ipset='/github.com/plex.tv/google.com/vpnbypass'
uci add_list dhcp.@dnsmasq[-1].ipset='/hulu.com/netflix.com/nhl.com/vpnbypass'
uci commit dhcp
/etc/init.d/dnsmasq restart
```

This feature requires ```dnsmasq-full``` to work. See the [Requirements](#requirements) section for more details.