This init script allows to start the Kea Control Agent, the DHCPv4
server, the DHCPv6 server, and the DHCP-DDNS server. It expects the
config files to be where the packages install them.
As this is a single init script that can start 4 different binaries that
are each in their own package, these files cannot be included in any of
these other package, so create a dedicated package for it.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This allows running multiple kea instances in load balancing or
hot-standby mode, minimizing risk of downtime.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* simplify the scan logic, to get rid of nifty IFS tricks
* limit the nearby scan results to process only the strongest uplinks, set 'trm_maxscan' accordingly (default '10')
* update the readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
but keep it selected by default as before
so it could be selected if nmbd and/or wssd2
should be used
Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
On hosts that have pcapnav-config installed, there is host lib leakage.
From config.log:
LNAVLIB='-L/usr/lib64 -lpcapnav -lpcap'
LNAV_CFLAGS='-I/usr/include'
Fix this by disabling pcapnav-config, which isn't available anyway.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* support the new travelmate option 'macaddr' to use a pre-defined MAC address (per uplink)
* vpn connections are now handled separately for each uplink
* The autoadd-feature for adding open uplinks will now be limited by the 'trm_maxautoadd' option. The default is '5', '0' disables this limitation.
* more code cleanups und optimizations to reduce the repetitive connection handling workload
* bugfixes regarding multiple radio support
* refine cp detection (no longer write and parse an error file)
Signed-off-by: Dirk Brenken <dev@brenken.org>
TARGET_CXX is added, because PowerDNS now uses C++17.
pdns.conf-dist is updated to the latest version shipped by PowerDNS.
010-time_t-check.patch, which is also used in pdns-recursor and dnsdist,
is added to patch out the check for 64-bit time_t,
because OpenWrt still supports 32-bit devices.
100-pdns-disable-pdns.conf-dist.patch is refreshed.
Signed-off-by: Wout Bertrums <wout@wbnet.eu>
* supports newer shellcheck
* restore EXTRA_COMMANDS compatibility with 19.07
* move status display from various functions to status_service
* bugfix: status_service line break after output
* minor arythmetic fix in status_service
Signed-off-by: Stan Grishin <stangri@melmac.net>
Backport a pending patch in order to DSCP-mark UDP traffic. This allows for
correct binning of traffic in diffserv-capable routers.
Additionally, remove Rosen Penev from the maintainers list, as per his request.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Description: Lack of support of HTTP/2 by default starts to hurt,
for example with https-dns-proxy package, some DoH resolvers (like mullvad)
no longer support HTTP/1 and are not usable.
This enables HTTP/2 support by default (which would bring ~68Kb libnghttp).
Signed-off-by: Stan Grishin <stangri@melmac.net>
* update binary to the latest commit (2021-07-29) to fix#16222 and #16239
* add hotplug.d/iface file and update Makefile to install it
* use Cloudflare's and Google's bootstrap DNS if bootstrap DNS is missing
* minor improvements in append_bool function
* add append_counter function for verbosity setting
* add append_bootstrap function (and supporting functions) to parse/sanitize bootstrap setting
* move firewall array from 'main' instance to the first proxy instance
* delete useless 'main' instace
Signed-off-by: Stan Grishin <stangri@melmac.net>
Open vSwitch supports SSL to connect to an OpenFlow controller. This is
recommended for security. Expand the UCI ovs config section to allow
configuring SSL CA, certificate and private key.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The Open vSwitch init script does not set USE_PROCD=1. Instead, it
defines most of the functions and variables that would be set when
USE_PROCD is set to 1, but with some minor changes.
The basescript variable however, which is used when calling
procd_open_service and procd_kill, is not set. As a result, basename of
the contents of the initscript variable is used as the service name. As
the service is automatically started via its symlink in /etc/rc.d,
S15openvswitch, the service name is S15openvswitch.
Set the basescript variable so that the service name is openvswitch.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
By default, Open vSwitch will generate the OpenFlow datapath ID of a
bridge based on the MAC address of one of its ports. Due to this, it's
possible that the datapath ID changes when new ports are added. When the
datapath ID changes, Open vSwitch disconnects from the controller, as
there is no way to notify the controller that the datapath ID has
changed.
Add an option to set the datapath ID so that the above situation can be
avoided. The option takes either exactly 16 hex characters, or when
prefixed with 0x, between 1 and 16 hex characters.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The config symbol is named CONFIG_OPENVSWITCH_WITH_LIBUNBOUND, so check
for that instead of the non-existent CONFIG_OPENVSWITCH_WITH_UNBOUND.
Fixes: 45c8cc9d8a ("openvswitch: make libunbound optional")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
support for 21.02.0-rc2 and up
support for reloading a single interface on ifup/ifupdate
rename config file
updated shellcheck compatibility
remove obsolete create/remove_lock
interface processing optimizations to speed up reloads
drop dependency on curl in user scripts
uniform styling of functions
Signed-off-by: Stan Grishin <stangri@melmac.net>
Installing openvswitch on an x86/64 snapshot image pulls in a bunch of
dependencies, good for a total size of 3648406 byte. Disabling
libunbound reduces that with 559941 byte, for a total of 3088465 byte.
This is quite a big reduction for a small tradeoff: without libunbound,
hostnames can not be used to specify OpenFlow managers or controllers.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* code cleanup
* add auto login script for Julianahoeve beach resort (NL)
* add auto login script for Vodafone hotspots (DE)
* add auto login script for telekom hotspots (DE)
* enhance captive portal detection to support html redirects as well
* change default captive portal detection url to
'detectportal.firefox.com'
Signed-off-by: Dirk Brenken <dev@brenken.org>
Stijn Tintel
Fritz D. Ansel
Dirk Brenken
Stan Grishin
Toke Høiland-Jørgensen
Jan Hak
Michal Vasilek
Daniel Golle
James White
Jan Pavlinec
Tianling Shen
Ansuel Smith
Wout Bertrums
Rui Salvaterra
Philip Prindeville
Yu Fang
Olivier Poitrey
Rosen Penev
Jan Pavlinec
Nick Hainke
Josef Schlehofer