Allows the Makefile to be cleaned up and to have fewer dependencies.
There's no need for multiple TLS libraries to be installed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
openconnect v8.10 supports 4 VPN protocols
--protocol=anyconnect Compatible with Cisco AnyConnect SSL VPN, as well as ocserv (default)
--protocol=nc Compatible with Juniper Network Connect
--protocol=gp Compatible with Palo Alto Networks (PAN) GlobalProtect SSL VPN
--protocol=pulse Compatible with Pulse Connect Secure SSL VPN
This patch allows user to specify protocol use the new "vpn_protocol"
option and deprecate the old option "juniper" which seems to be missing in
the current openconnect client.
Signed-off-by: Mengyang Li <mayli.he@gmail.com>
version 8.2.6 (October 19, 2020):
- try and address license concerns with LICENSE.md
- replace usleep with nanosleep (Rosen Penev <rosenp@gmail.com>)
- console: Add 'k' option to exit on console-down (Mylène Josserand <mylene.josserand@collabora.com>)
- Fix#48 - apply ipv4 CIDR access list when compiled with ipv6 support
Signed-off-by: Bjørn Mork <bjorn@mork.no>
The additional directory is created and can be used e.g. for configurations
which are created e.g. dynamically from an uci config.
Signed-off-by: Helge Mader <ma@dev.tdt.de>
For applications writing their own xinetd configuration to the /etc/xinetd.d
directory it would be necessary to save them (e.g. a user edits them manually)
Signed-off-by: Helge Mader <ma@dev.tdt.de>
When the interface section was changed, the changed configuration
options were not applied.
This commit adds the service reload handling again.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* switch all safesearch providers to dynamic ips (derived from cname)
* made the new safesearch approach compatible with bind-nslookup
* removed 3.x config compatibility code
Signed-off-by: Dirk Brenken <dev@brenken.org>
Django 3.1 supports relative paths for static_url.
Use it to make it more flexible.
Minor fixes for upgrade:
* ignore-fail-on-non-empty for rmdir /usr/share/etesync-server/etesync_server
* do not stop service (it is stopped already and init file is removed)
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
The underlying `acme.sh` allows custom ACME server URLs (using `--server`). Adding the necessary field to specify a custom ACME server URL from UCI.
Signed-off-by: Jannis Pinter <jannis+openwrt@pinterjann.is>
Use "mwan3 use" to wrap a command with interface bindings so that you can
avoid the mwan3 rules and test behavior on a specific interface.
eg "mwan3 use wan ping -c1 1.1.1.1"
Additional binding arguments to the command will have their system
calls intercepted and ignored.
eg "mwan3 use wan ping -c1 -I tun0 1.1.1.1" will use the
device associated with "wan", rather than "tun0".
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Rather than using a special mwan3 user to manage mwan3track's tracking
packets, this commit implements a small helper library to bind to
device and to set a fwmark so that the tracking packets can be routed
out of the correct interface.
This provides a consistent method for binding to a device rather than
relying on various packages potentially buggy implementations. For
example: #8139 and #12836
This helper issue also allows for more tracking methods to be added
even if they do not have a command line option to bind to device,
such as iperf3 (eg #13050).
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
start all mwan3mon and mwan3track instances on mwan3 start
if an interface is down when mwan3track starts, it waits
for a signal from the hotplug script to start
procd can then handle stopping all of the scripts when mwan3
is halted
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
correctly terminate interface status checks with new lines so that
interface status does not get confused when one interface is a prefix
of another interface.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
handle creation of routing tables in mwan3rtmon to avoid race
conditions and potentially missing routes
handle ipv6 routes that have expiry
update directly connected ipset when routes are added or deleted
add fall through rules so that the default routing table is not
used if no rule in the interface-specific routing table matches
add option to comply with mwan3 source based routing
get default route parameters from main routing table
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Remove paxctl stuff. pax is not packaged in OpenWrt.
Add reload support.
Install lua cfg file as 644. It's needed to be readable as prosody user
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* Change KEY/HMAC_KEY to __CHANGEME__, which is rejected by fwknopd
during start-up. The value CHANGEME is used only by LuCI package
luci-app-fwknopd - pull request for generating keys directly from
LuCI has been created already.
* Add sensible defaults for ENABLE_IPT_FORWARDING and ENABLE_NAT_DNS,
which both are/were set by luci-app-fwknopd. Move the defaults here.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
The substring "release_" does not reflect the version number.
In addition, package names will be shorter.
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
mbedcrypto should be searched, not mbedtls. Also, there is no pkgconfig
file with mbedtls. Fixed that as well. Removed Makefile hacks.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev
Olivier Poitrey
Jan Hak
Mengyang Li
Bjørn Mork
Lucian Cristian
Richard Gering
Helge Mader
Florian Eckert
Aaron Goodman
Joel Johnson
Meano
Pavel Demkovich
Matthias Schiffer
Dirk Brenken
Yousong Zhou
Peter Stadler
Jannis Pinter
James White
Oldřich Jedlička
Nicholas Smith
Jan Pavlinec
Alexey Dobrovolsky
Jeffery To