There was an upstream patch that changes mips1 to mips.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

NTRU support has been removed in wolfssl 5.0 so it is required to
mask NTRU specific code if wolfssl >= 5.0

Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>

It has been imported as core package into OpenWrt repository. Its fdtget
is required by sysupgrade on U-Boot devices so it couldn't live in an
extra feed.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

This commit updates boost to version 1.78.0
More info about Boost 1.78.0 can be found at the usual place [1].

No new libraries have been added.

[1]: https://www.boost.org/users/history/version_1_78_0.html

Signed-off-by: Carlos Miguel Ferreira <carlosmf.pt@gmail.com>

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

When openldap is not enabled, the following configurables remain present
in the config:

CONFIG_OPENLDAP_DEBUG=y
\# CONFIG_OPENLDAP_CRYPT is not set
\# CONFIG_OPENLDAP_MONITOR is not set
\# CONFIG_OPENLDAP_DB47 is not set
\# CONFIG_OPENLDAP_ICU is not set

This patch adds a libopenldap dependency for these options, removing the
above from .config when libopenldap is not used. Further, move these
configurables to Config.in.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>

Add patch to get rid of xmlto dependency.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Remove upstreamed patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

It can be built statically as nothing else uses it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Remove all patches as they have been upstreamed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: W. Michael Petullo <mike@flyn.org>

Signed-off-by: W. Michael Petullo <mike@flyn.org>

Remove upstreamed patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

Signed-off-by: W. Michael Petullo <mike@flyn.org>

Signed-off-by: W. Michael Petullo <mike@flyn.org>

Signed-off-by: W. Michael Petullo <mike@flyn.org>

Signed-off-by: W. Michael Petullo <mike@flyn.org>

Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>

Update to 3.73 to alievate critical vulnerability CVE-2021-43527:
Memory corruption via DER-encoded DSA and RSA-PSS signatures

https://www.mozilla.org/en-US/security/advisories/mfsa2021-51/

Signed-off-by: Donald Hoskins <grommish@gmail.com>

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

The raison d'être of package mariadb-common was to provide common my.cnf
config file that was being used to include subdirectories and then to
push utf-8 as default everywhere. Let's make this file part of the
server package as there we actually set other options as well and drop
it from all clients. Instead let's set utf-8 as default in server,
client and client libraries. While at it also set socket to the more
common path and drop mysqld_safe script from the list of configuration
files and do other minor tweaks.

Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com>

libxslt/host is complaing that static libxml2 should be with -fPIC.
Unconditionally enable -fPIC for for host build of libxml2.

Fixes: dc701d61b ("libxml2: don't build host shared libraries")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mesa in the video feed requires expat/host. Provide host build to
allow mesa to build.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

2021-09-27 v1.11.0 "Smew Duck"
  This maintenance release adds support for VBR mode in VP9 rate control
  interface, new codec controls to get quantization parameters and loop filter
  levels, and includes several improvements to NEON and numerous bug fixes.

  - Upgrading:
    New codec control is added to get quantization parameters and loop filter
    levels.

    VBR mode is supported in VP9 rate control library.

  - Enhancement:
    Numerous improvements for Neon optimizations.
    Code clean-up and refactoring.
    Calculation of rd multiplier is changed with BDRATE gains.

  - Bug fixes:
    Fix to overflow on duration.
    Fix to several instances of -Wunused-but-set-variable.
    Fix to avoid chroma resampling for 420mpeg2 input.
    Fix to overflow in calc_iframe_target_size.
    Fix to disallow skipping transform and quantization.
    Fix some -Wsign-compare warnings in simple_encode.
    Fix input file path in simple_encode_test.
    Fix valid range for under/over_shoot pct.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

Signed-off-by: Igor Bezzubchenko <garikello@gmail.com>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Signed-off-by: Espen Jürgensen <espenjurgensen+openwrt@gmail.com>

Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>

needed after libyang update

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>

needed by frr 8+

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>

Changelog: https://lists.haxx.se/pipermail/c-ares/2021-October/000002.html

This includes the update to the domain name, made upstream, ref: https://lists.haxx.se/pipermail/c-ares/2021-September/000001.html

Signed-off-by: Karl Palsson <karlp@etactica.com>

Switch to AUTORELEASE for simplicity.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Reported via:
  https://github.com/openwrt/packages/pull/16823#issuecomment-945312460

This fails in mips_mip32 targets with the output listed below.

Using the MIPS24K target works fine.

```
mips-openwrt-linux-musl-gcc -c -Os -pipe -mno-branch-likely -mips32 -mtune=mips32 -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -ffile-prefix-map=/builder/shared-workdir/build/sdk/build_dir/target-mips_mips32_musl/OpenBLAS-0.3.18=OpenBLAS-0.3.18 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro  -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-mips_mips32_gcc-11.2.0_musl/usr/include -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-mips_mips32_gcc-11.2.0_musl/include/fortify -I/builder/shared-workdir/build/sdk/staging_dir/toolchain-mips_mips32_gcc-11.2.0_musl/include   -DMAX_STACK_ALLOC=2048 -Wall -mabi=32 -DF_INTERFACE_GFORT -fPIC -DNO_LAPACK -DNO_LAPACKE -DNO_AVX512 -DSMP_SERVER -DNO_WARMUP -DMAX_CPU_NUMBER=2 -DMAX_PARALLEL_NUMBER=1 -DBUILD_SINGLE=1 -DBUILD_DOUBLE=1 -DBUILD_COMPLEX=1 -DBUILD_COMPLEX16=1 -DVERSION=\"0.3.18\" -UASMNAME -UASMFNAME -UNAME -UCNAME -UCHAR_NAME -UCHAR_CNAME -DASMNAME= -DASMFNAME=_ -DNAME=_ -DCNAME= -DCHAR_NAME=\"_\" -DCHAR_CNAME=\"\" -DNO_AFFINITY -I.  -DMAX_STACK_ALLOC=2048 -Wall -mabi=32 -DF_INTERFACE_GFORT -fPIC -DNO_LAPACK -DNO_LAPACKE -DNO_AVX512 -DSMP_SERVER -DNO_WARMUP -DMAX_CPU_NUMBER=2 -DMAX_PARALLEL_NUMBER=1 -DBUILD_SINGLE=1 -DBUILD_DOUBLE=1 -DBUILD_COMPLEX=1 -DBUILD_COMPLEX16=1 -DVERSION=\"0.3.18\" -UASMNAME -UASMFNAME -UNAME -UCNAME -UCHAR_NAME -UCHAR_CNAME -DASMNAME=sgemm -DASMFNAME=sgemm_ -DNAME=sgemm_ -DCNAME=sgemm -DCHAR_NAME=\"sgemm_\" -DCHAR_CNAME=\"sgemm\" -DNO_AFFINITY -I.. -I. -UDOUBLE  -UCOMPLEX gemm.c -o sgemm.o
In file included from ../common.h:581,
                 from gemm.c:41:
gemm.c: In function 'sgemm_':
../param.h:3477:25: error: 'sgemm_p' undeclared (first use in this function); did you mean 'sgemm_'?
 3477 | #define SGEMM_DEFAULT_P sgemm_p
      |                         ^~~~~~~
../common_param.h:1334:25: note: in expansion of macro 'SGEMM_DEFAULT_P'
 1334 | #define SGEMM_P         SGEMM_DEFAULT_P
      |                         ^~~~~~~~~~~~~~~
../common_param.h:1482:33: note: in expansion of macro 'SGEMM_P'
 1482 | #define GEMM_P                  SGEMM_P
      |                                 ^~~~~~~
gemm.c:494:37: note: in expansion of macro 'GEMM_P'
  494 |   sb = (XFLOAT *)(((BLASLONG)sa + ((GEMM_P * GEMM_Q * COMPSIZE * SIZE + GEMM_ALIGN) & ~GEMM_ALIGN)) + GEMM_OFFSET_B);
      |                                     ^~~~~~
../param.h:3477:25: note: each undeclared identifier is reported only once for each function it appears in
 3477 | #define SGEMM_DEFAULT_P sgemm_p
      |                         ^~~~~~~
../common_param.h:1334:25: note: in expansion of macro 'SGEMM_DEFAULT_P'
 1334 | #define SGEMM_P         SGEMM_DEFAULT_P
      |                         ^~~~~~~~~~~~~~~
../common_param.h:1482:33: note: in expansion of macro 'SGEMM_P'
 1482 | #define GEMM_P                  SGEMM_P
      |                                 ^~~~~~~
gemm.c:494:37: note: in expansion of macro 'GEMM_P'
  494 |   sb = (XFLOAT *)(((BLASLONG)sa + ((GEMM_P * GEMM_Q * COMPSIZE * SIZE + GEMM_ALIGN) & ~GEMM_ALIGN)) + GEMM_OFFSET_B);
      |                                     ^~~~~~
make[5]: *** [Makefile:1295: sgemm.o] Error 1
make[5]: Leaving directory '/builder/shared-workdir/
```

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>