Even though nut-cgi doesn't run a daemon, using procd triggers
is helpful for updating the generated config file when the
UCI config changes. So implement this and 'modernize' nut-cgi initscript
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Forced shutdown of the UPS was not actually happening before
due to lack of specific commands doing the shutdown. This
(and the nut-driver initscript) fix that.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
This fully procdifies nut-monitor, which fixes some issues with
very slow restarts (due to /lib/functions/procd.sh using a very
long delay for non-native scripts doing restart) as well as gives
respawning, etc.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
usbhid-ups has the necessary information in the source, so
let's support USB hotplugging out of the box. Takes advantage of
the procd support now in nut-server initscript.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Clarify the different between the common nut-driver portions of
nut-server and the nut-server (upsd) proper. nut-driver can't
be used without nut-server so there is no compelling reason
to split into a separate package, but the reorganization makes
such a move easier and makes it clear what each bit is for.
While we continue to use a single initscript, it's a properly
procdified one which handles the upsd daemon as a different
instance than the driver instances. This resolves a race
condition in which upsd and drivers fail to start do to
a degree of interdepedence.
Also properly 'procd'ifies the nut-server initscript.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
We want to include the symlinks to the generated configurations
in conffiles so that if the user replaces them symlinks with
traditional NUT configuration it is preserved across sysupgrade.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Make sure that libbsd is not picked up during configuration even if it is
compiled before socat is.
Signed-off-by: Michal Hrusecky <michal.hrusecky@nic.cz>
Option 'ip_source' was silently ignored during public IP discovery.
Discovery (in spite of chosen 'ip_source') was based only on
'ip_network', 'ip_interface', 'ip_script' or 'ip_url' options (in this
order) if they were set. This could lead to misleading log entries
"Detect local IP on '$ip_source'" pointing to source that wasn't really
used.
Now only option relevant to configured 'ip_source' is taken into
account.
Signed-off-by: Jacek Politowski <dev@jpol.net.pl>
The upstream acme.sh package changed to using socat instead of netcat;
update the dependencies to reflect this, and pass --listen-v6 when running
in standalone mode (since socat only listens on IPv4 by default).
Also add a missing cleanup call when certificate issuance fails.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Nginx provide WebDAV methods PUT, DELETE, MKCOL, COPY, and MOVE with
http_dav_module. But most WebDAV clients that require additional WebDAV
methods (PROPFIND & OPTIONS) to operate. Add missing methods support
with Arutyunyan Roman (arutyunyan.roman@gmail.com)'s nginx-dav-ext-module.
(see: http://nginx.org/en/docs/http/ngx_http_dav_module.htmlhttps://github.com/arut/nginx-dav-ext-module)
Example config:
location / {
dav_methods PUT DELETE MKCOL COPY MOVE;
dav_ext_methods PROPFIND OPTIONS;
root /var/root/;
}
Signed-off-by: Ruixi Zhou <zhouruixi@gmail.com>
Bugfix release. Full changelog at:
https://mosquitto.org/blog/2018/08/version-151-released/
Of most interest to OpenWrt:
* Remove use of AI_ADDRCONFIG, which means the broker can be used on systems where only the loopback interface is defined.
* Fix IPv6 addresses not being able to be used as bridge addresses.
* Fix problem opening listeners on Pi caused by unsigned char being default.
* Fix segfault on startup if bridge CA certificates could not be read.
* Fix possible endian issue when reading the memory_limit option.
* library and client bugfixes including: https://github.com/openwrt/packages/issues/6765
Signed-off-by: Karl Palsson <karlp@etactica.com>
HTTPS to everything
Remove autoreconf as it's not needed and slows down the build.
Build in parallel for faster building.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* fix restart behaviour after successful connection
* fix labeling of faulty stations
* optimize re-connect behaviour at locations where multiple uplinks with
the same SSID are in range
* use procd pidfile handling
* refine logging
* small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
ssl_set1_host() is not available without openssl-1.1.0. Unbound can not do
host cert verification. DNS over TLS connects, but hosts are unverified. A
patch for log err is added with a noitce in README.md.
(see: https://www.nlnetlabs.nl/bugs-script/show_bug.cgi?id=658)
Also, squash some minor robustness and TLS usability fixes.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Daniel F. Dickinson
Michal Hrusecky
Toke Høiland-Jørgensen
Peter Wagner
Jacek Politowski
Yousong Zhou
Moritz Warning
Ansuel Smith
Dirk Brenken
Christian Lachner
Wojciech Dubowik
Rob Mosher
Ruixi Zhou
Robby K
Martin Konrad
Karl Palsson
Andy Walsh
Rosen Penev
W. Michael Petullo
Eric Luehrsen
Daniel Engberg
Chen Minqiang
W. van den Akker