Fixes the following security issues:
* CVE-2021-25215 - named crashed when a DNAME record placed in the ANSWER
section during DNAME chasing turned out to be the final
answer to a client query.
* CVE-2021-25214 - Insufficient IXFR checks could result in named serving a
zone without an SOA record at the apex, leading to a
RUNTIME_CHECK assertion failure when the zone was
subsequently refreshed. This has been fixed by adding an
owner name check for all SOA records which are included
in a zone transfer.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Using `$(INSTALL_CONF)` will cause the program has no access to
configurations file when someone enabled the selinux support.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Xray now is no longer planning to keep compatibility with original
v2ray. Remove PROVIDES before it is totally broken.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
From mosquitto 2.x, port became optional and deprecated in the config,
and it was recommended that listeners be used instead. Drop the hard
requirement in our config conversion script.
Reported in: https://github.com/openwrt/packages/issues/15506
Signed-off-by: <karlp@etactica.com>
Maintainer: @neheb / @BKPepe / @zhanhb
Compile tested: ipq806x, generic, netgear_r7800, master
Run tested: ipq806x, generic, netgear_r7800, openwrt-19.07
Description:
Squid now only support HTTPS proxy in TCP tunnel mode (e.g. `ssl_bump splice all`):
https_port 3128 ssl-bump tls-cert=/etc/squid/squid.pem generate-host-certificates=on
ssl_bump splice all
In order to operate in SSL Bump mode, we need to compile with `--enable-ssl-crtd` for following configuration:
https_port 3128 ssl-bump tls-cert=/etc/squid/squid.pem generate-host-certificates=on
sslcrtd_program /usr/lib/squid/security_file_certgen -s /car/cache/squid/ssl_db -M 4MB
ssl_bump stare all
ssl_bump bump all
This PR switch the `SQUID_enable-ssl-crtd` into `default y`, therefore default enable SSL Bump mode.
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
Staging certificates have the advantage that their retry limits are loose.
Therefore they can be obtained quickly when automatic retries are used.
Unfortunately they can not be used for deployments because their CA is not
accepted by clients. Production certificates do not have this limitation, but
their retry limits are strict. For production certificates, automatic retries
can only be performed a few times per hour. This makes automatic obtainment of
certificates tenacious.
With use_auto_staging=1, the advantages of the two certificate types are
combined. Uacme will first obtain a staging certificate. When the staging
certificate is successfully obtained, uacme will switch and obtain a production
certificate. Since the staging certificate has already been successfully
obtained, we can ensure that the production certificate is successfully
obtained in the first attempt. This means that "retries" are performed on the
staging certificate and the production certificate is obtained in the first
attempt.
In summary, this feature enables fast obtaining of production certificates when
automatic retries are used.
By default, this feature is set to use_auto_staging=0, which means that
uacme will behave as before by default.
Signed-off-by: Leonardo Mörlein <git@irrelefant.net>
With this commit, issue_cert() can be called multiple times alternating
between staging and production certificates within a script.
Before this commit, the production state dir was stored in $STATE_DIR.
But in the case of $use_staging=1, this variable was overwritten in
issue_cert() with $STAGING_STATE_DIR. This made it impossible to call
issue_cert() with $use_staging=0 afterwards. Now the production state
dir is stored in $PRODUCTION_STATE_DIR. This way it is not overridden
anymore and issue_cert() can be called multiple times alternating with
production and staging.
Signed-off-by: Leonardo Mörlein <git@irrelefant.net>
The get_bool() functionality was already merged to lib/functions.sh, so
it is redundant in the init script. Remove it.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
- ignore Content-Length from backend if 101 Switching Protocols
- close HTTP/2 connection after bad password
- skip cert chain build for self-issued certs
- meson zstd fix
- ls-hpack upstream update
- discard some HTTP/2 DATA frames received after response
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
- Exit start if a probe_key is not present
- Add create_key command to generate a private_key based on the provided username in the atlas config.
- Add registration instruction in /etc/atlas
- Rework script to save probe_key on sysupgrade (the key are now adviced to be placed in the /etc/atlas dir and a link is used to make them accessible in the atlas-sw-scripts etc dir)
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* lots of fixes for many subsystems
* new messenger group chat service
* 'abd' temporarily removed due to upstream issue
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes two related security vulnerabilities (CVE-2020-15078) which
under very specific circumstances allow tricking a server using delayed
authentication (plugin or management) into returning a PUSH_REPLY before
the AUTH_FAILED message, which can possibly be used to gather
information about a VPN setup. In combination with "--auth-gen-token" or
a user-specific token auth solution it can be possible to get access to
a VPN with an otherwise-invalid account.
OpenVPN 2.5.2 also includes other bug fixes and improvements.
Add CI build test script.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* add a "whitelist only" mode, this option allows to restrict Internet
access from/to a small number of secure websites/IPs, and block access
from/to the rest of the Internet.
Signed-off-by: Dirk Brenken <dev@brenken.org>
This commit is largely based on the work from Daniel Dickinson in
PR #2096 which was never merged. I tweaked it in a number of ways.
All bugs with this package are mine, not his.
Signed-off-by: Aaron Curley <accwebs@gmail.com>
* support the RPZ trigger 'RPZ-CLIENT-IP' to always allow/block certain
clients based on their IP (currently only supported by bind!)
* avoid promiscuous mode in tcpdump setup for adblock reporting
* speed up dns report preparation
* support dns report mailing (/etc/init.d/adblock report mail)
* fix bind autodetection
* update LuCI-frontend (separate PR)
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
NLS means Native Language Support and when you have it enabled (it is
not default), clamav can not be compiled as it shows following error:
Package clamav is missing dependencies for the following libraries:
libiconv.so.2
Also, it is required that package libiconv-full is compiled first/before
than clamav and then try to compile clamav.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
/etc/profile.d/50-openvpn-easy-rsa.sh was not listed as configfile
and changes were lost during upgrades.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
libseccomp can't be built on ARC, so we must disable the option here as
well. A different fix was first proposed by @zxlhhyccc in #15377.
Fixes: #15313
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Add patch fixing compilation without deprecated OpenSSL APIs.
Fix installation. This never worked as the section was misnamed.
Updated tool names.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
chacha20policy1305 is also an AEAD cipher, and hence does not
permit a hash algorithm.
Fixes issue #15397.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Olivier Poitrey
Dirk Brenken
Noah Meyerhans
Jan Pavlinec
Othmar Truniger
Dobroslaw Kijowski
Daniel Golle
Aleksander Jan Bajkowski
Jan Bubík
Moritz Warning
Tianling Shen
Karl Palsson
Peter van Dijk
Tao Gong
Wong Hoi Sing Edison
Rosen Penev
Leonardo Mörlein
Oldřich Jedlička
Glenn Strauss
Ansuel Smith
Magnus Kroken
Sibren Vasse
Florian Eckert
Aaron Curley
Philip Prindeville
Josef Schlehofer
Luiz Angelo Daros de Luca
Eneas U de Queiroz