This is the latest version, which still has support for PHP 7.x.
It's an intermediate step in the transition to PHP 8.x.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Release notes:
1.8.0
- Upgrade json.hpp dependency to version 3.10.2
- Check if DNS servers need to be applied on macOS
- Set MAC address before bringing up Linux TAP link
- Stop binding to temporary IPv6 addresses
- Fix for mistakenly using v6 source addresses for v4 routes on some platforms
- Fix for MacOS MTU capping issue on feth devices
- Implement a workaround for one potential source of a "coma" bug, which can occur if buggy NATs/routers stop allowing the service to communicate on a given port. ZeroTier now reassigns a new secondary port if it's offline for a while unless a secondary port is manually specified in local.conf. Working around crummy buggy routers is an ongoing effort.
- A completely rewritten desktop UI for Mac and Windows!
1.8.1
- Fix an issue that could cause clobbering of MacOS IP route settings on restart.
- Added additional hardening against address impersonation on networks (also in 1.6.6).
- MacOS IPv6 no longer binds to temporary addresses as these can cause interruptions if they expire.
- Remove support for REALLY ancient 1.1.6 or earlier network controllers.
- Fix numerous UI issues from 1.8.0 (never fully released).
Changed to git as source and added $(AUTORELEASE)
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
bug fixes:
- Remove unreachable code path
- exit: report if the exit command was killed
- exit: fix race zombie reaper
- conn_sock: allow watchdog messages through the notify socket proxy
- seccomp: add support for seccomp notify
misc:
- Add seccomp to build dependency
included patch removes unnecessary dependency of libdl and also allows a succesfull build
disabled for arc where libseccomp does not seem to be available
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
A lot of changes since 3.3.1.
Full (long) lists of release notes between
versions are available at
https://github.com/containers/podman/releases
containers.conf updated
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
release notes:
0.20.1
- container: ignore error when resetting the SELinux label for the keyring.
0.21
- when compiled with krun, automatically use it if the current executable file is called "krun"
- cgroup: lookup pids controller as well when the memory controller is not available
- status: add fields for owner and created timestamp
- honor memory swappiness set to 0
1.0
- Fix symlink target mangling for tmpcopyup targets.
- Makefile.am: fix link error when using directly libcrun.
- cgroup: add support for setting memory.use_hierarchy on cgroup v1.
- linux: treat pidfd_open failures EINVAL as ESRCH.
- cgroup: chown the current container cgroup to root in the container.
1.1
- utils: retry openat2 on EAGAIN. If the openat2 syscall is interrupted, try again.
- criu: fix save of external descriptors. Now restored containers attach correctly their standard streams.
- criu: Add support for external PID namespace.
- container: Set primary process to 1 via LISTEN_PID by default if user configuration is missing.
- exec: refuse to exec in a paused container/cgroup.
- cgroup: use cgroup.kill when available. It is faster to kill a container through its cgroup as there is no need to recurse over the cgroup pids and terminate each one of them.
1.2
- criu: add support for external ipc, uts and time namespaces.
- exec: fix regression in 1.1 where containers are being wrongly reported as paused.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Client and server software to query DNS over HTTPS, using Google DNS-over-HTTPS protocol and IETF DNS-over-HTTPS (RFC 8484). https://github.com/m13253/dns-over-https
Signed-off-by: Martin Schneider <martschneider@google.com>
liburing is preferred over libaio. So, if liburing has already been
built, mariadb will use it, instead of libaio, failing with a missed
dependency. If it is not found, then libaio is used.
Since it depends on the kernel being built with io_uring support, and it
defaults to y unless SMALL_FLASH=y, then we should allow libaio as
fallback, checking the CONFIG_KERNEL_IO_URING symbol.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
mariadb may detect boost libraries, if the latter has been built with
threads, date_time and chorno support, then it will enable the
columnstore engine, which fails to build.
Set PKG_RELEASE:=$(AUTORLEASE).
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Remove the --install parameter when running aclocal. The --install
argument is used to copy third-party files to the first -I directory.
gnutls has -I m4 first, which would copy files to its local build
directory. However, openwrt prepends the staging dir m4 directory,
causing aclocal --install to copy an old definition of
ax_code_coverage.m4 into the staging dir.
If strace is built after gnutls, compilation will fail:
Makefile:9303: *** missing separator. Stop.
The version of ax_code_coverage.m4 that gets installed does not define
@CODE_COVERAGE_RULES@.
Removing the --install parameter in gnutls solves the issue.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
This PR prepares PHP for a few minor changes that cause PHP builds to fail when using --enable-intl with ICU 70.1.
Change UBool to bool for equality operators in ICU >= 70.1
https://github.com/php/php-src/pull/7596
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
This PR prepares PHP for a few minor changes that cause PHP builds to fail when using --enable-intl with ICU 70.1.
Change UBool to bool for equality operators in ICU >= 70.1
https://github.com/php/php-src/pull/7596
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
ICU 70 released. It updates to Unicode 14, including new characters, scripts, emoji, and corresponding API constants. ICU 70 adds support for emoji properties of strings. It also updates to CLDR 40 locale data with many additions and corrections. ICU 70 also includes many other bug fixes and enhancements, especially for measurement unit formatting, and it can now be built and used with C++20 compilers.
This change will require minor modifications in php7 and php8.
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
/etc/config is the default uci folder. Also marking it as
configuration file prevents overwriting it on updates.
Signed-off-by: Jonathan Pagel <jonny_tischbein@systemli.org>
This commit add new package afuse into packages feed.
afuse is an automounting file system implemented in user-space using
FUSE. It implements the most basic functionality that can be expected by
an automounter; that is it manages a directory of virtual directories.
If one of these virtual directories is accessed and is not already
automounted, afuse will attempt to mount a filesystem onto that
directory. If the mount succeeds the requested access proceeds as
normal, otherwise it will fail with an error.
Signed-off-by: Michal Hrusecky <michal@hrusecky.net>
Side-effect of dropping capabilities(7) with last commit is now we
need the `/var/run/named/` directory created for us at startup.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
The module will be available, once php8 is selected, at the same place
as the other apache modules.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Reasons to drop this package:
a) this package depends on luci-app-rosy-file-server
Unfortunately, it was marked as broken as it is unmaintained.
See: 34b682afac
b) maintainer is inactive
c) rosinson website does not seem to be working
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Update to the newest versions and switch to $(AUTORELEASE) for the python3 packages (where I am the maintainer).
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
Currently when the connection times out, the interface will disconnect.
Add capability to add persistent option to re-establish connectivity.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* adopt pypi name and line numbers in patches
* remove custom tar command and patch for using python3 (changed upstream)
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
It never works... And Xray-core needs root access to work.
Bump geodata to latest version while at it.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Michael Heimpold
Wout Bertrums
Rosen Penev
Peter van Dijk
Oskari Rauta
Alexandru Ardelean
Tianling Shen
Martin Schneider
Alexander Koenig
Eneas U de Queiroz
Nikos Mavrogiannopoulos
Michel Promonet
Ren Zongjia
Josef Schlehofer
Andre Heider
Hirokazu MORIKAWA
Jonathan Pagel
Michal Hrusecky
Philip Prindeville
Sebastian Kemper
David Bauer
Javier Marcet
Rui Salvaterra
Peter Stadler
Matthew Hagan
Chao Liu
Andy Li