During 4.2.1 version update support for subordinate IDs has been
disabled. It was handled by:
1) Adding --disable-subordinate-ids to avoid:
configure: error: cannot run test program while cross compiling
2) Adding patch 003-fix-disabling-subids.patch to avoid:
usermod.c: In function 'process_flags':
usermod.c:1364:10: error: 'vflg' undeclared (first use in this function)
if ( (vflg || Vflg)
^
This commit adds a patch with a proper configure.in fix. We don't need
to disable subordinate IDs anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
rpcd-mod-packageslist is now integrated in rpcd-mod-rpcsys since
commit 49fde37@lede-project/source.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Detect if calling rpc-sys packagelist fails due to the method not
being provided by rpcd.
Mark package as experimental.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The Attended sysUpgrade CLI is a full-featured client for the
attended-sysupgrade service which works directly on the target device.
It requires libustream-ssl as well as at least the CA certificate
needed to contact the sysupgrade server.
It has only been tested briefly and is by no means ready for
production!
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
due to various clients and the existence of rpcd-mod-rpcsys the package
rpcd-mod-attendedsysupgrade is superflous.
From now on the attendedsysupgrade-common package should be dependencie
of all kinds of clients.
Currently active or planned:
- luci-app-attendedsysupgrade
- attendedsysupgrade cli in shell
- attendedsysupgrade cli in c
Signed-off-by: Paul Spooren <paul@spooren.de>
Don't need to have a bare /etc/modules.d/ file since we can cleanly
synthesize one now.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
This method allows getting basic info about a queried container. It's
based on the lxc-info command-line tool.
Example output:
> ubus call lxc info '{ "name": "foo" }'
{
"name": "foo",
"state": "RUNNING",
"pid": 2946,
"ips": [
"192.168.0.124"
]
}
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Approved-by: Luka Perkov <luka@openwrt.org>
tio is a simple TTY terminal I/O application
It's smaller than picocom, uses GNU autotools and has some nice features
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
call it upgrade instead of update
added client options:
auto_search - start upgrade search on login
advanced_mode - offer more options like package_editing
message before sysupgrade
more verbose Makefile
moved acls to client
Signed-off-by: Paul Spooren <paul@spooren.de>
squashfs-tools does not provide tar-balls.
It looks like a good time to pull a newer version
that obsoletes a few accepted patches.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Previous versions of LXC never compiled in gnutls support due to a bug in the
configure script. As other TLS implementations are not supported and the feature
was disabled in previous builds, disable it during configure.
See https://github.com/lxc/lxc/pull/1360 for details regarding the bug in the
autoconf of the previous versions.
Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
This is the first bugfix release for LXC 2.1. Full list of changes can
be found here:
https://linuxcontainers.org/lxc/news/
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Bump LXC package from 1.1.5 to 2.1.0. Version 2.x includes many
improvements and optimizations.
https://linuxcontainers.org/lxc/news/
Some tools like lxc-top are rewritten in C and are no longer broken and
dependent on lua.
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
This daemon allows users to control PWM driven RGB LEDs using ubus.
Currently it is possible to make leds blink at different brightnesses
and or make them fade in between colours.
the following call will turn green on and red off:
ubus call led set '{ "leds": { "ap:green:status": 255, "ap:red:status": 0 } }'
the following call will make green and red fade on/off over 2 seconds:
ubus call led set '{ "leds": { "ap:green:status": [0, 255], "ap:red:status": [255, 0] }, "on": 2000, "off": 2000, "fade": 1 }'
Signed-off-by: John Crispin <john@phrozen.org>
Update package to 3.1.21, remove parts of patches which were already
included upstream, update some OpenWrt specific things.
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
netwhere is a simple packet monitor that serves summarized captured data as a JSON document over a REST endpoint. Once installed
the netwhere example site is available at /netwhere?collector=IP:8080.
Signed-off-by: Ben Smith <le.ben.smith@gmail.com>
YARA is a tool aimed at (but not limited to) helping malware researchers
to identify and classify malware samples. With YARA you can create
descriptions of malware families based on textual or binary patterns.
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
When cross-compiling Domoticz on a system without GPIO, the WITH_GPIO
flag is not set by cmake, and GPIO support is disabled as a result.
Enabling GPIO support by adding the flag to TARGET_CXXFLAGS.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Domoticz 3.8153 introduced support for dzVents. Unfortunately this was
broken by the 902_add-scripts-path, which attempts to make Domoticz more
FHS-compliant instead of throwing everything under /opt/domoticz.
The problem is that dzVents scripts added via the webinterface will be
generated on the filesystem. With the 902_add-scripts-path patch,
Domoticz tried to write this to "scriptsdir/dzVents/generated_scripts".
As the scriptsdir contains scripts that come with upstream, and are not
meant to be changed, this defaults to /usr/share/domoticz/scripts, which
is not writeable, so Domoticz is unable to write the script to the
filesystem. What is worse is that this silently fails.
Fix this by moving the generated_scripts dir to
"userdatadir/generated_scripts". The userdatadir defaults to
/var/lib/domoticz, which is writeable.
Additionally, since this patch does more than just adding the scripts
path, rename it to something more appropriate.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Instead of using update-pciids from a postinst script, just download
the pci.ids file from its repo the same way that usbutils grabs usb.ids.
Remove the compression since we're going onto a squashfs filesystem
(most likely) anyway.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Update nano editor to 2.8.7
Apply post-release fix from upstream to enable compilation
with --enable-tiny
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Rafał Miłecki
Alexandru Ardelean
Daniel Golle
Paul Spooren
Philip Prindeville
Daniel Engberg
AaronA
Florian Eckert
Etienne Champetier
Ted Hess
Nuno Goncalves
Karl Vogel
Vladimir Ulrich
Marko Ratkaj
Vadim A. Misbakh-Soloviov
John Crispin
Phil Eichinger
Thomas Heil
Rosen Penev
Paul Wassi
Peter Wagner
Ben Smith
Hirokazu MORIKAWA
Stijn Tintel
Hannu Nyman
Iván Atienza