* remove needless third status "not connected", use only "running / not
connected" and "connected"
* change indentation from spaces to tabs (saves 4kb)
* small fixes
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
* fix restart behaviour after successful connection
* fix labeling of faulty stations
* optimize re-connect behaviour at locations where multiple uplinks with
the same SSID are in range
* use procd pidfile handling
* refine logging
* small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer rename faulty uplinks in /etc/config/wireless, but save
uplink state in json runtime information. To reset the saved state
simply restart travelmate processing.
Signed-off-by: Dirk Brenken <dev@brenken.org>
* union 'automatic' and 'trigger' mode, now much more responsive
if an uplink suddenly disappears
* tidy up (disable) travelmate related uplink connections
if you disable the service
* change default config ('trm_automatic' removal)
* documentation update
* LuCI: remove needless 'automatic' and 'trigger' options
plus small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* checks continuously the signal quality for conditional
uplink (dis-) connections
* captive portal detection with internet online check and
a 'heartbeat' function to keep the uplink connection up & running
Signed-off-by: Dirk Brenken <dev@brenken.org>
* corner case fix with multiple (partly disabled) radios
* LuCI: BSSID will be ignored by default in 'wireless add' dialog
* LuCI: Textarea 'autoscroll down' in logfile view
* LuCI: refine logfile search term
Signed-off-by: Dirk Brenken <dev@brenken.org>
* limit sta interface selection/handling
to defined travelmate interface (trm_iface) only
* check eap capabilities and ignore enterprise uplinks
as long as eap support is not available
* documentation update
* cosmetics
* LuCI: various cleanups
Signed-off-by: Dirk Brenken <dev@brenken.org>
* backend/frontend: supports a Connection Limit ('trm_maxretry')
of '0', to disable this feature (unlimited retries)
Signed-off-by: Dirk Brenken <dev@brenken.org>
0.9.1
backend:
* load procd reload trigger only in 'manual' mode
* documentation update
frontend:
* further optimized Station Overview & Scan page,
especially for mobile devices
* add a "Rescan" button in manual mode on overview page
* XHTML fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
backend:
* handle errors due to misconfigured uplinks
* various bugfixes
luci frontend:
* add a powerful wireless station manager to edit and delete existing
interfaces or scan for new uplinks
Signed-off-by: Dirk Brenken <dev@brenken.org>
* wait for hostapd comes up during boot
* remove needless ubus call during script startup
* remove needless iwinfo check (covered by package dependency)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* use iwinfo instead iw for wlan scanning,
scanning now works on radio-level
* enhance multiple radio support:
* support STA-only radio configurations,
e.g first radio with local AP, second radio
with a bunch of STAs (without APs)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* always update the connection status, even in case of an error
* merge multiple ubus network calls in central check routine
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer misuse ubus/procd service object for travelmate runtime
information, now save all required information directly
in a JSON file/format
* new 'status' init command to print runtime information
* add a configurable interface trigger timeout for
nested & slow modem/router setups, set 'trm_triggerdelay' accordingly
* change start priority & refine reload timings
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* rework automatic mode (active scan/re-connection handling):
* much more procd & resource friendly
* now enabled by default
* save runtime information in ubus service (data section)
* final backend preparation for new LuCI-GUI (still WIP!)
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
* optimized connection handling -
removed needless timeouts & wireless commits
* set the pre-configured reload timeout to
a more conservative/realistic value of 30 seconds
* further logging tweaks
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add an "active mode", where travelmate will be restarted
every n seconds (default 60) and checks existing uplink connection
regardless of ifdown event trigger (disabled by default)
* enhance multiple radio support
* fix the ap detection
* respect different radios during scanning & connection handling
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add 'enabled' check in init script
* support multiple radios (see online doc)
* fix race condition in ap check
Signed-off-by: Dirk Brenken <dev@brenken.org>
* switch to procd interface trigger
* no additional active monitor/polling in the background
* simplified code
* new option "trm_maxwait", how long (in seconds)
should travelmate wait for wlan interface reload action
(default: '20')
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
* change option 'trm_iw' to boolean,
1 => use iw (default)
0 => use iwinfo
* option 'trm_maxretry' now accepts '0' to disable this check at all
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
Dirk Brenken