In a vrrp_instance the track_interface could not be referenced similar
to a track_script. The uci track_interface section must be always set
into every vrrp_instance.
During config generation use the already prepared function
"print_track_elem_indent" to write the track_interface section into every
vrrp_instance which references this.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If you add a notify_* script which is not only a path to a script or
to a bin file, it is necessary to quote to whole string. If you do not
quote this the config will not get accepted by keepalived and so will
not start. This will fix this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
mikrotik-btest is a bandwidth test client compatible with Mikrotik's RouterOS BTest server.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
As jool builds a kernel module, a PKG_BUILD_DIR under KERNEL_BUILD_DIR must
be used to avoid reusing build artifacts when switching to a different
target of the same architecture. Otherwise, kernel ABI mismatches may
result, leading to an unusuable module, or build failures like the
following:
Package kmod-jool is missing dependencies for the following libraries:
crypto_hash.ko
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Get rid of gnutls dependency introduced in 5bca84b. Needs patching
configure script to make gnutls existence test optional.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
I should have packaged the OVN stuff, VTEP and what-not
earlier, but was not inspired to do this earlier.
I made some time now to package those parts.
Disabling flake8 & python3 explicitly.
They might get detected and cause weird build errors.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Maintainer: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Run tested: LEDE Reboot 17.01.3 r3533-d0bf257c46
Description:
user.err ddns-scripts: IP update not accepted by DDNS Provider
dynv6.com response "unchanged" is OK
Signed-off-by: Ernest Moshkov <e.moshkov@gmail.com>
Fixes bug where sslh was being linked against libconfig, but libconfig
CPPFLAGS were being ignored.
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
1.) pkg version bumped from 6.4.3 to 6.11.5
2.) maintainer changed to me (#4944 dhcpcd: needs a new maintainer)
3.) source changed from bz2 to xz
4.) removed old unnecessary patch
5.) minor style improvements
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
mtu 1400, mru 1400 - on ppp devices, usually we need lower mtu, the existing link mabye is already under a lower MTU
require-mschap-v2 - most of the time l2tp is used in conjunction with windows client who will use this kind of auth
lcp-echo-interval 20, lcp-echo-failure 5 - keep alive 20 seconds interval and dead peer detection after 100 seconds
connect-delay 5000 - wait for up to 5 seconds after the connect script finishes for a valid PPP packet from the peer
nodefaultroute - prevent users from creating default routes with pppd
nodefaultip - disables the default behavior when no local IP address is specified
proxyarp - this will have the effect of making the peer appear to other systems to be on the local ethernet
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
lock is no longer needed and it breaks the setup
explicit added PKG_BUILD_DEPENDS:=libpcap, an indirect depend included in ppp and needed for pfc
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
ClamAV's configure script uses grep to check for bugy zlib version
1.2.1. Since current OpenWrt zlib version is 1.2.11 this check passes
and build fails. This patch will disable this unneeded check and make
sure we are looking for zlib on the right location.
clamdtop was beeing built without it's ncurses dependency. Build system
would link it to the host's ncurses making the program fail at run time.
This patch will disable building of optional clamdtop, otherwise we need
to add ncurses as a dependency and fix the search path.
Increase PKG_RELEASE to reflect changes.
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
An unneccesary include in the init file was causing problems when using the package builder.
Signed-off-by: Jonathan Bennett <JBennett@incomsystems.biz>
- fix CVE-2017-9798
- fix#4926
make http2 support configurable, in case of enables libnghttp2
package dont build http2. instead use CONFIG_APACHE_HTTP2 to
enable http2 support
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
Added new "network" section with option "network", which takes network
interface name.
The start-up is migrated to use procd and depend either on the "network"
interface (after resolving it to a physical device), or on the PCAP_INTF
option from "config" section (usual place for raw interface name for
fwknopd). When the uci_enabled option is disabled, the value of PCAP_INTF
is taken from the user-provided fwknopd.conf.
Also fixed UCI_ENABLED variable evaluation.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
The l7-filter project hasn't been active for a very long time and support in
OpenWrt/LEDE has been dropped making this package orphaned.
Support in qos-script removed: bdb6c313de
(SVN: r45425)
Support in tree removed: d0ba3bb1e2
(SVN: r45423)
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Florian Eckert
Peter Wagner
Roger Pueyo Centelles
Wendy Wu
Matthias Schiffer
Stijn Segers
Othmar Truniger
Marcin Jurkowski
Alexandru Ardelean
Gergely Kiss
Ernest Moshkov
Hsing-Wang Liao
Jonathan McCrohan
Nikos Mavrogiannopoulos
Marko Ratkaj
Steven Hessing
Lucian Cristian
Dirk Brenken
Jonathan Bennett
Kevin Darbyshire-Bryant
Thomas Heil
Mislav Novakovic
Eric Luehrsen
Oldřich Jedlička
Daniel Engberg
Hauke Mehrtens
Federico Di Marco
Patrick Grimm