Some collectd plugins launch third-party plugins that have variation in
initialisation time (like libpcap). Recently (since kernel bump to 4.1)
the DNS plugin has been causing collectd to crash semi-randomly at startup
on MIPS based WNDR3700.
Debugging led to realisation that the DNS plugin seems to require at least
0.1s time to start, before the first data reading attempt starts.
By default, the first data read cycle starts immediately, while apaprently
some of the plugins may still be asyncronously initialising. To make things
safe, this patch adds 1 second delay before the first data read cycle.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The 2015g release of the tz code and data is available. It reflects the
following changes, which were either circulated on the tz mailing list
or are relatively minor technical or administrative changes:
Changes affecting future time stamps
Turkey's 2015 fall-back transition is scheduled for Nov. 8, not
Oct. 25.
(Thanks to Fatih.)
Norfolk moves from +1130 to +1100 on 2015-10-04 at 02:00 local time.
(Thanks to Alexander Krivenyshev.)
Fiji's 2016 fall-back transition is scheduled for January 17, not 24.
(Thanks to Ken Rylander.)
Fort Nelson, British Columbia will not fall back on 2015-11-01. It has
effectively been on MST (-0700) since it advanced its clocks on
2015-03-08.
New zone America/Fort_Nelson. (Thanks to Matt Johnson.)
Changes affecting past time stamps
Norfolk observed DST from 1974-10-27 02:00 to 1975-03-02 02:00.
Changes affecting code
localtime no longer mishandles America/Anchorage after 2037.
(Thanks to Bradley White for reporting the bug.)
On hosts with signed 32-bit time_t, localtime no longer mishandles
Pacific/Fiji after 2038-01-16 14:00 UTC.
The localtime module allows the variables 'timezone', 'daylight',
and 'altzone' to be in common storage shared with other modules,
and declares them in case the system <time.h> does not.
(Problems reported by Kees Dekker.)
On platforms with tm_zone, strftime.c now assumes it is not NULL.
This simplifies the code and is consistent with zdump.c.
(Problem reported by Christos Zoulas.)
Changes affecting documentation
The tzfile man page now documents that transition times denote the
starts (not the ends) of the corresponding time periods.
(Ambiguity reported by Bill Seymour.)
Signed-off-by: Vladimir Ulrich <admin@evl.su>
if a user's env has PERL_MM_OPT defined collect will fail to build. Adding
--with-perl-bindings="" will override this env var.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Buildbots are reporting the following error:
../mme/ARPCPrint.c: In function 'ARPCPrint':
../mme/ARPCPrint.c:123:2: error: incompatible type for argument 3 of 'vfprintf'
vfprintf (fp, (char *)(&data->LIST [LE16TOH (data->STROFFSET)]), (void *)(&data->LIST [LE16TOH (data->ARGOFFSET)]));
^
In file included from /store/buildbot/slave/mxs/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_musl-1.1.11_eabi/include/fortify/stdio.h:20:0,
from ../mme/ARPCPrint.c:68:
/store/buildbot/slave/mxs/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_musl-1.1.11_eabi/include/stdio.h:108:5: note: expected '__isoc_va_list' but argument is of type 'void *'
Fix this by definition __UCLIBC__ to enable a workaround for this
issue.
While at, switch to HTTPS URL for cloning the git repo.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Changes since oldpackages:
- cups dependency was completely removed
* This also happened in sane trunk version
- small musl patch
- added detection of inb,outb (link error with musl)
* this also removes hack 020-non-i386-qcam.patch
- fix for segfault when using sane-test backend
- removed link to extra libraries in libsane (used only
for preload backends)
- added format-security fix
- sane-libs and sane-backends merged and exploded into
individual packages for each backend:
* libsane for sane library (which backends should dep on)
* sane-daemon for saned daemon
* sane-xxx for sane backend for xxx
** each backend has its own custom dep libraries
* sane-backends-all (with no files) that deps on all backends
* sane-qcam is only available for x86/x86_64
** other archs does not implement inb/outb (at least in musl)
Now it is possible to use SANE with much less FS space (KB
instead of MB).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
This commit updates (and also fixes) the lvm2 package.
The previous Makefile version, was using an incorrect
package version (2.02.126), which does not exists
at the specified FTP source site.
Signed-off-by: Carlos Ferreira <carlosmf.pt@gmail.com>
Monitor adapters (zeroconf, enet, usb and w1) don't have the reset
routine, causing null pointer dereference in BUS_reset function.
This patch has been submitted upstream:
https://sourceforge.net/p/owfs/bugs/67/
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
This fixes the endless loop waiting for w1 subsystem connector status
message.
According to the 8a0427d kernel commit, the last (status) netlink msg
should have ack=seq, whereas all the others messages should have ack=seq+1.
This patch has been submitted upstream: https://sourceforge.net/p/owfs/bugs/66/.
For independent problem report, see this thread:
https://www.raspberrypi.org/forums/viewtopic.php?f=44&t=98772
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Owfs shared library is quite large (700+ kB) by embedded devices standards.
The code for many different bus master and slave devices is compiled
into single big .so library. Had it been designed as modular,
dynamic-loadable plugins, we could split them into separate packages,
allowing user to install only the plugins he needs.
It's however possible to enable or disable libow features at compile time.
Here are some examples how much space can be saved turning off support for
unneeded devices and features:
- By disabling USB adapter support libusb and libusb-compat is no
longer needed, saving ~70kB of space. Bus masters using usbserial.ko
kernel driver don't need this.
- By disabling debug messages it's possible to reduce shared library
size by 130kB.
This patch adds a menu allowing user to select libow features one wants
built in:
- Bus master support: USB adapters through libusb, i2c adapters, kernel w1
adapters
- General features: zeroconf device announcement, debug messages, owtraffic
bus reports
Default config options preserve previous library configuration i.e.
everything is selected except for owtraffic (which was disabled) and
kernel w1 driver (whose netlink interface has been broken since 2011).
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Owfs daemons lack control scripts. This patch adds init.d scripts for owfs,
owserver, owhttpd and owftpd packages.
Most daemon options (both common libow and program-specific parameters)
are reflected as uci config variables.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Also already mentioned in ba4338d6f7,
the security feature FORTIFY_SOURCE could be set globally.
The current approach tries to undefine and redefine it, however,
the order on the command line prevents this from being successfully, e.g.:
arm-openwrt-linux-muslgnueabi-gcc ... -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -D_FORTIFY_SOURCE=1 ...
`---------------v-------------------' `--------v--------'
AM_CFLAGS OpenWrt params
So to have the original source (static) _FORTIFY_SOURCE=2 define,
the only option is to remove it from AM_CFLAGS completely, and
to pass it after the OpenWrt settings explicitely in the Makefile.
This should fix the buildbots finally.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
The config file shipped with collectd dates from 2010 and
leads to error messages if luci-statistics & collectd are installed,
as it references several plugins not usually installed, or such ones
that have been renamed since then.
For most users, this file is just a placeholder during collectd installation,
as /usr/bin/stat-genconfig from /etc/init.d/luci_statistics will overwrite it.
Sanitize and shorten the placeholder config file:
* Reference actively only the default plugins installed by luci statistics.
* Match the placeholder config with the genuine config from luci statistics.
If somebody uses collectd separately from luci statistics, he will need to
edit these settings anyway.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Since openocd depends on hidapi it needs appropriate LD_FLAGS to link
against it as that library depends on libiconv.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Enable the entropy plugin that monitors the available entropy in a Linux system.
Works ok and has no library dependencies. Tested on ar71xx/WNDR3700.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Hannu Nyman
Daniel Golle
Álvaro Fernández Rojas
Vadim A. Misbakh-Soloviov
Steven Barth
Vladimir Ulrich
John Crispin
Tim Harvey
Marko Ratkaj
Alexander Ryzhov
Anton Glukhov
Michael Heimpold
Kevin Darbyshire-Bryant
Luiz Angelo Daros de Luca
aTanW
cmf
Marcin Jurkowski
Paul Fertser
Gergely Kiss
Ted Hess
Marcel Denia
heil
Nuno Goncalves