Enable AUTORELEASE in a separate commit so that the next commit can be
reverted without having to manually re-introduce it.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit cf1e146858)
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Enabling OPENVSWITCH in the kernel config selects MPLS. This exposes the
MPLS_ROUTING symbol, which is missing if kmod-mpls is not enabled. On
kernel 5.4 this problem doesn't show up, as the Open vSwitch package
uses the in-tree kernel modules rather than the upstream ones.
Restore the kmod-mpls dependency when using the upstream kernel modules
to fix build.
Reported-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The ifeq check for CONFIG_OPENVSWITCH_WITH_LIBUNBOUND does not evaluate
correctly within the menuconfig, resulting in libunbound not being
selected, resulting in a failing libunbound.so.8 dependency.
Instead add this condition:dependency in the manner defined in the
OpenWrt developer guide.
Signed-off-by: Matthew Hagan <mathagan@fb.com>
ovs_libovsdb_depends and ovs_libofproto_depends append the libatomic
dependency. However in these cases these variables were not previously
defined and thus a reader may search the Makefile for the definition.
Therefore change the operator to explicitly define these dependency
variables, rather than append. In addition add a space after operator to
improve readability and conform to other dependency definitions in the
Makefile.
Signed-off-by: Matthew Hagan <mathagan@fb.com>
Rather than defining dependencies, then appending the libatomic
dependency on the following line, merge all into one definition.
Simultaneously, sort by alphabetical order.
Signed-off-by: Matthew Hagan <mathagan@fb.com>
Commit 1038ac1235 ("openvswitch: add support for definining bridge ports...")
added two new options:
- drop_unknown_ports
- ports
They are missing from the README, so add them.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Open vSwitch does not bring up ports automatically. This is not a
problem for wireless ports, or for ports configured in
/etc/config/network, but other ports will be down, and require manual
interaction to be brought up. Configuring them with proto none will
cause netifd to do some actions on them, which might cause undefined
results, and will also bloat the UCI config file.
The cleanest solution is to bring all member ports up as part of the
init script.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Python six was required to build the OVS Python libs during the time when
they were supporting both Python 2 & 3.
Python 3 is a minimum requirement for OVS Python's libs since commits:
1ca0323e7cbd90524550
and Six is no longer required since commit
0c4d144a98
The end-goal here is to get rid of the Python Six host-build.
OVS is the only user.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
When Open vSwitch is configured to use a controller, but is unable to
connect to it, Open vSwitch will setup flows to allow all traffic, if
the failure mode is not configured, or set to standalone.
As this might be a security hazard, it is also possible to configure
Open vSwitch in a secure failure mode. Enabling this mode causes Open
vSwitch to drop all traffic if it is unable to connect to the
controller.
Redirect stderr of the command to /dev/null as it does not support the
--if-exists option.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Due to a copy-paste error, libopenvswitch is missing a dependency when
Open vSwitch is configured to use unbound:
Package openvswitch-libopenvswitch is missing dependencies for the following libraries:
libunbound.so.8
Use the correct config symbol to solve this.
Fixes: 45c8cc9d8a ("openvswitch: make libunbound optional")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add a UCI config option to set the OpenFlow datapath description. This
allows setting a human readable description of the bridge, e.g.
"Building x, Floor y, AP z", which makes it easier to recognize the AP.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Open vSwitch supports SSL to connect to an OpenFlow controller. This is
recommended for security. Expand the UCI ovs config section to allow
configuring SSL CA, certificate and private key.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The Open vSwitch init script does not set USE_PROCD=1. Instead, it
defines most of the functions and variables that would be set when
USE_PROCD is set to 1, but with some minor changes.
The basescript variable however, which is used when calling
procd_open_service and procd_kill, is not set. As a result, basename of
the contents of the initscript variable is used as the service name. As
the service is automatically started via its symlink in /etc/rc.d,
S15openvswitch, the service name is S15openvswitch.
Set the basescript variable so that the service name is openvswitch.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
By default, Open vSwitch will generate the OpenFlow datapath ID of a
bridge based on the MAC address of one of its ports. Due to this, it's
possible that the datapath ID changes when new ports are added. When the
datapath ID changes, Open vSwitch disconnects from the controller, as
there is no way to notify the controller that the datapath ID has
changed.
Add an option to set the datapath ID so that the above situation can be
avoided. The option takes either exactly 16 hex characters, or when
prefixed with 0x, between 1 and 16 hex characters.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The config symbol is named CONFIG_OPENVSWITCH_WITH_LIBUNBOUND, so check
for that instead of the non-existent CONFIG_OPENVSWITCH_WITH_UNBOUND.
Fixes: 45c8cc9d8a ("openvswitch: make libunbound optional")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Installing openvswitch on an x86/64 snapshot image pulls in a bunch of
dependencies, good for a total size of 3648406 byte. Disabling
libunbound reduces that with 559941 byte, for a total of 3088465 byte.
This is quite a big reduction for a small tradeoff: without libunbound,
hostnames can not be used to specify OpenFlow managers or controllers.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The current way to add ports to an Open vSwitch bridge does not allow
complex port configurations. Use a dedicated uci config section per port
instead of the current port:type syntax. This way we can easily support
more features like setting the VLAN tag or the OpenFlow port number.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Calling the ovs_bridge_init function when stopping the service will
result in ovs-vsctl being called after ovsdb-server has been shut down.
This causes the following error:
ovs-vsctl: unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory)
Calling the ovs_bridge_init function when requesting the service status
has no added value.
Only call ovs_bridge_init during start or restart to fix this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
CI run fails due to dirty patches, so refresh them.
Fixes: f4f1a25e80 ("openvswitch: bump to version 2.15.0")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add limited procd support to handle config reload
Option drop_unknown_ports can be used to ensure that only configured ports
are part of the bridge
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Quote NEWS item
> - Building the Linux kernel module from the OVS source tree is
> deprecated
> * Support for the Linux kernel is capped at version 5.8
> * Only bug fixes for the Linux OOT kernel module will be accepted.
> * The Linux kernel module will be fully removed from the OVS source
> tree
> in OVS branch 2.18
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
The crude loop I wrote to come up with this changeset:
find -L package/feeds/packages/ -name patches | \
sed 's/patches$/refresh/' | sort | xargs make
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Support for kernel 4.14 has been removed in main repo, so drop the
dependencies here as well (and those for even older 4.9).
Also drop a patch that is required only for 4.14 and lower.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This is to make explicit the conditional select of libunwind is only
needed for libopenvswitch. If we spill it over other packages, the
generated kconfig will have recursive dependency issue. 2 new patches
were made for this goal
The other thing is that "+libunwind" will cause it to be built if any of the
packages defined in this Makefile is enabled (y or m). This is at the moment
by-design of the build system.
Libunwind does not support architectures like arc. Use conditional select To
avoid (libunwind) build failures like the following,
checking for ELF helper width... configure: error: Unknown ELF target: arc
make[3]: *** [Makefile:65: /data/openwrt/build_dir/target-arc_arc700_uClibc/
libunwind-1.3.1/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 1
Things like "+PACKAGE_openvswitch-libopenvswitch:libunwind" will also result in
recursive deps error for chains of 3 nodes. Kconfig construct like the
following will be made
config A
tristate
select B
depends on !(C) || (x)
config B
tristate
select C
config C
tristate
config x
bool
Other changes include
- Shared use of variable ovs__common_depends was removed
- Ovn doc build was patched out
Link: https://github.com/openwrt/packages/pull/12959#issuecomment-665021413
Reported-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
This new config section in package openvswitch
supports creating a named bridge, and setting
its' OpenFlow controller end-point.
An example config is included in /rom/etc/config/openvswitch
Signed-off-by: Simon Kinane <skinane@fb.com>
This is needed since openvswitch 2.13 commit 2a97891eb23b
("Documentation: Work with sphinx-build for Python 3 also.")
The 4th patch was also reworked to serve as another guard
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
This removes Python-related build variants, and adds
PYTHON3_PKG_BUILD:=0 and minor build adjustments (where appropriate),
for non-Python packages. There should be no changes to build output.
This also updates some include paths for python3-package.mk and/or
python3-host.mk to be relative to the package Makefile.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Phase 2 buildbots with this option enabled will cleanup openvswitch
build dir which is needed later when building ovn
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
This is to address the need that openvswitch starting with 2.13 now
depends on libunwind for handling SIGSEGV (upstream commit e2ed6fbeb18
("fatal-signal: Catch SIGSEGV and print backtrace"))
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
python2 library is now removed as the transition has been done by the
upstream project
OVN is now a separate project released with its own release plan and
it's not included within openvswitch starting with ovs 2.13.
openvswitch.mk is split out from the main Makefile for adding ovn
packages back in following commits.
The following two patches are already included in 2.13
- ovsdb-idlc-fix-dict-change-during-iteration.patch
- compat-Include-confirm_neigh-parameter-if-needed.patch
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Condition testing for Linux version 4.14 is spelled LINUX_4_14, not
LINUX_4.14, so the checks were ineffective up to this change.
This Fixes the following error which appeared after update to 2.12.0,
when built against kernel 4.14:
Package kmod-openvswitch-intree is missing dependencies for the
following libraries:
tunnel6.ko
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Stijn Tintel
Matthew Hagan
Alexandru Ardelean
Felix Fietkau
Yousong Zhou
Ilya Lipnitskiy
Florian Eckert
Adrian Schmutzler
Matthias Schiffer
Simon Kinane
Huangbin Zhan
Jeffery To
Josef Schlehofer
Lech Perczak
Jan Pavlinec