When AICCU is not running, running 'aiccu stop' results in unnecessary
communications with SixXS servers.
Signed-off-by: Ondrej Caletka <Ondrej@Caletka.cz>
This check tries to wait for NTP daemon to synchronise clock to lower stratum
than 16 before running the aiccu binary. In case timeout (configurable
in new option ntpsynctimeout; default is 90 seconds) is reached, the
AICCU is run neverrtheless. This makes the new script compliant with
some corner case scenarios like not using Busybox NTPd or not using NTPd
at all, maintaining maximum out-of-the box functionality.
Signed-off-by: Ondrej Caletka <Ondrej@Caletka.cz>
This patch integrates AICCU with netifd. Care was taken not to restart
aiccu without a reason as it triggers alert on SixXS infrastructure.
Example usage:
config interface 'wan6'
option 'proto' 'aiccu'
option 'username' 'HANDLE-SIXXS/TID'
option 'password' 'Password'
option 'ip6prefix' '2001:db8:aabb::/48' #Delegated subnet
option 'ip6addr' '2001:db8:aaaa:aaa::2/64' #Optional
option 'verbose' 'true'
Tested with current trunk on TL-WR703N.
Signed-off-by: Ondrej Caletka <ondrej@caletka.cz>
This patch integrates tayga with netifd. Parametres are nearly same as
with the older scripts. Support for static mapping of IPv4<=>IPv6 addresses
is missing. Example configuration:
config interface 'nat64'
option proto 'tayga'
option prefix 64:ff9b::/96
option dynamic_pool 10.128.0.0/24
option ipv4_addr 10.128.0.1 #address of the TAYGA itself
option ipv6_addr 2001:470:5990::64
option ipaddr 192.168.1.1 #optional address of TUN interface
option ip6addr 2001:db8::1
Signed-off-by: Ondrej Caletka <ondrej@caletka.cz>
This patches fixes wrong ICMP checksum of translated packets on
big-endian machines #16715
The patch is authored by upstream author
Nathan Lutchansky <lutchann@litech.org>
Source of the patch: http://forum.mikrotik.com/viewtopic.php?f=15&t=82329
Signed-off-by: Ondrej Caletka <ondrej@caletka.cz>
Ondřej Caletka
Thomas Bahn
Ian Leonard