Use sfdisk to get GPT partition by name as partition names are not
known by the kernel if added via partx.
Make sure physical volume names are unique, if possible correlate
with the disks serial number and/or card's cid.
mkf2fs apparently returns 134 even in case format succeeded, so don't
fail in that case (this fixes rw volumes large enough for F2FS to be
selected by the lvm scripts of uvol).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- Add support for AppArmor
- Gracefully stop containers and pods on shutdown
I found out that If you change location of containers to persistent storage instead of tmpfs, starting them will fail unless they have been stopped. If this is the case that reboot has occurred before pods and containers have been stopped, they cannot be started, they have to be removed and re-created. Change in initscript tries to avoid that. Even if containers are running at tmpfs, this won't hurt. Still, if something happens and system hangs/reboots/etc, script won't save you from that. It's just a attempt to make things better.
I also enabled AppArmor support for future possibilities.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Currently, this package can not be installed while using standard path
of busybox, because binary killall wants to be installed on the same
location as busybox.
Collision:
• /usr/bin/killall: busybox (new-file), psmisc (existing-file)
Many of these binaries, which provides alternatives were moved to
folder /usr/libexec like wget, sed, findutils, less.
So I moved killall to /usr/libexec and others leave in touch and added
ALTERNATIVES for it, because preinstall script is no longer necessary.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Emmit ubus events when volumes come up/down.
Make sure volume state is always well defined by introducing
additional state 'write-prepare' (wp) during mkfs.
Add init scripts to bring up volumes at boot.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
HAVE_LIBPCIACCESS that is currently passed through MAKE_VARS to disable
building with libpciaccess can't be set through the environment.
Instead, use CONFIG_CON_PCI, which can be passed through the environment
and will disable libpciaccess.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Switch to AUTORELEASE for simplicity.
Use autotools build.
Remove upstream patch.
Minor cleanups for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Make sure filesystem is ready when volume becomes available.
Use 'write-once' as initial state for read-only volumes, only allow
writing to volumes in that state and transision to 'read-only' once
write has completed.
Also fix a typo which prevented 'list' command from working with LVM.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Bugs:
- Fix for invalid handler warning on Windows builds
- Fix config hash to trigger container recreation on IPC mode updates
- Fix conversion map for placement.max_replicas_per_node
- Remove extra scan suggestion on build
Signed-off-by: Javier Marcet <javier@marcet.info>
Features:
- Add profile filter to docker-compose config
- Add a depends_on condition to wait for successful service completion
Miscellaneous:
- Add image scan message on build
- Update warning message for --no-ansi to mention --ansi never as alternative
- Bump docker-py to 5.0.0
- Bump PyYAML to 5.4.1
- Bump python-dotenv to 0.17.0
Signed-off-by: Javier Marcet <javier@marcet.info>
The package needs libseccomp, which does not currently support arc.
In order to avoid a circular dependency, we must avoid arc here as well.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
modbus-utils was not intended to be added at this stage. Remove it.
Fixes: 312594f86 ("uvol: add new package")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
uvol is a wrapper-script which allows automated handling of storage
volumes. uvol currently comes with backend support for LVM2 and UBI,
covering practically all options for storage large enough to be
managed (NAND, SPI-NAND, eMMC, SATA, NVME, virtio-blk, ...).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This was probably a work-around for an issue with dependencies which
was fixed by
988ed00802
Remove it as all other packages with `-selinux` variants do provide
a non-SELinux-variant without any suffix and that works now, see
procd vs. procd-selinux
busybox vs. busybox-selinux
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Instead of just appending the driver serial including the '0x' prefix,
use '-' prefix instead to make it more readable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The 'autopart' package is intended for devices with rather large
block device storage (ie. SATA or MMC).
It automatically allocates the free space on the block device used
for booting into an LVM2 physical volume.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
crun is the prefered container run-time of podman, it's faster than
runc and has a much lower memory footprint.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
* Updated the .ga TLD server.
* Removed the .cd and cf TLD servers.
* Removed 72 new gTLDs which are no longer active.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Ariadne Conill (1):
database: do not chroot(".") unless actually necessary
Martin Vahlensieck (1):
Use correct port when redirected
Timo Teräs (5):
db: fix control character check to use uint8_t
libfetch: send Proxy-Authorization also for https connect
del: report correctly package's provides names
Signed-off-by: Paul Spooren <mail@aparcar.org>
faster to compile.
A small selection of packages was tested going from:
Executed in 696.30 secs fish external
usr time 82.98 mins 395.00 micros 82.98 mins
sys time 9.02 mins 0.00 micros 9.02 mins
to:
Executed in 592.20 secs fish external
usr time 84.84 mins 361.00 micros 84.84 mins
sys time 8.85 mins 57.00 micros 8.85 mins
Tested by running make -j 12 and wiping staging/build_dir/target_x
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Bugs:
- Make --env-file relative to the current working directory and error out for
invalid paths. Environment file paths set with --env-file are relative to the
current working directory while the default .env file is located in the project
directory which by default is the base directory of the Compose file.
- Fix missing service property storage_opt by updating the compose schema
- Fix build extra_hosts list format
- Remove extra error message on exec
- Fix OpenSSL version mismatch error when shelling out to the ssh client
- Add missing build flags to the native builder: platform, isolation and
extra_hosts
- Remove info message on native build
- Avoid fetching logs when service logging driver is set to 'none'
Miscellaneous:
- Add compose.yml and compose.yaml to default filename list
Signed-off-by: Javier Marcet <javier@marcet.info>
Switch to AUTORELEASE for simplicity.
Add libarchive dependency since it's now used.
Build with ninja for faster compilation.
Refresh SIMD CMake patch and add musl patch.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Golle
Gerard Ryan
Oskari Rauta
Hannu Nyman
Josef Schlehofer
Tianling Shen
Eneas U de Queiroz
Rosen Penev
Javier Marcet
Tomas Lara
Philip Prindeville
Alexandru Ardelean
Paul Spooren