Fixes the following build error with an external toolchain:
./bld/sqlite3.o: In function `fts5Bm25Function':
sqlite3.c:(.text+0x27234): undefined reference to `log'
./bld/piechart.o: In function `piechart_render':
piechart_.c:(.text+0x430): undefined reference to `sincos'
piechart_.c:(.text+0x47c): undefined reference to `sincos'
piechart_.c:(.text+0x548): undefined reference to `sincos'
collect2: error: ld returned 1 exit status
src/main.mk:526: recipe for target 'fossil' failed
make[3]: *** [fossil] Error 1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This backports a patch that has been accepted upstream in linuxptp:
8b61aa2c3f ("udp: Avoid including
netdb.h") to fix build errors with external glibc toolchains that
provide rpc/types.h.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Conserver is an application that allows multiple users to use
serial consoles at the same time, with logging. It has a client-
server design which makes it easy to manage a distributed set
of serial consoles. Logging makes post-crash analyses easier.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Standard assignment is immediate expansion without any extraneous spacing, RFC822 compliant email addresses and consistent section assignments
Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
types that got generated. Problem was that it didn't remove that key
as one of the paths that the server looks for by default. As a
consequence, your log file might fill up with messages like:
2017-06-01T15:43:07-06:00 openwrt sshd[31929]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key
The patch is forunately trivial. Don't set the path for the dsa
key file in the server configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Peter Wagner <tripolar@gmx.at>
From upstreams changelog:
This rather large snapshot touches quite a few sensitive areas, so I'm
releasing it now rather than later to receive feedback on any possible issues.
It also contains fixes, so everybody should upgrade.
* man: fix psk mention in wg-quick man page
* man: update wg-quick(8) to show Debian resolvconf braindamage
Documentation cleanups.
* wg-quick: use src routing for default routes in v6
ip-rule(8) doesn't do the right thing with source addresses, unless we
explicitly set it inside the route. This fixes wg-quick on IPv6 systems.
* curve25519: actually, do some things on heap sometimes
* curve25519: align the basepoint to 32 bytes
* curve25519: add NEON versions for ARM
* data: enable BH during parallel crypto on ARM/NEON
* chacha20poly1305: move constants to rodata
* chacha20poly1305: add NEON versions for ARM and ARM64
We now have faster primitives on ARM and ARM64 processors, which should
improve performance.
* handshake: process in parallel
Handshakes are now processed in parallel using all cores, which should improve
throughput during a storm.
* noise: no need to store ephemeral public key
* noise: precompute static-static ECDH operation
We can precompute the ECDH(s, s) calculation, which improves handshake
initiation message performance by double.
* style: spaces after for loops
* peer: use iterator macro instead of callback
The most unreadable C ever produced. It might be wise to find a sexier-looking
alternative at some point.
* compat: remove warning for < 4.1
* compat: ship padata if kernel doesn't have it
The usual array of annoying compat things.
* rust test: convert screech test to snow
* rust test: add icmp ping
We now use Jake's snow library for Noise in the test, which we've expanded to
complete a ping.
* config: do not error out when getting if no peers
* tools: allow creating device with no peers
Fixing some small things in the tool/config interaction.
* device: keep going when share_check fails
* routingtable: remove unnecessary check in node_placement()
* config: it's faster to memcpy than strncpy
* timers: fix typo in comment
Nits.
* debug: print interface name in dmesg
For those who compile with `make debug`, you'll be happy to see a bit better
information in dmesg.
* timers: rework handshake reply control flow
* timers: the completion of a handshake also is on key confirmation
* timers: reset retry-attempt counter when not retrying
Tightening up our timer implementation, which is quite important.
Signed-off-by: Dan Luedtke <mail@danrl.com>
Since we're using the kernel's module, this is
un-necessary.
Should speed up the build a bit.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Admittedly I never used those Python libs.
And the setup I was trying it on, did not have
the Python interpreter packaged, so these build failures
went un-noticed.
That's my fault for not trying it out properly on
a full LEDE repo, with all packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Add UCI section general which holds the uci parameter network defining on
which interface(s) the snmp agent is reachable for inbound snmp requests
in case the firewall zone does not allow INPUT traffic by default.
For the different zones to which the different interfaces belong firewall
procd input rules are created making the snmp agent reachable on udp port
161.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Base LEDE/OpenWrt UCI for dnsmasq provides for DNS override in
/etc/config/dhcp. It is desired to be able to use dnsmasq and
Unbound as transparently as possible. Option 'add_extra_dns'
will pull 'domain', 'mxhost', 'srvhost, and 'cname' from base.
netifd/procd have an interaction with DHCPv6/RA on WAN (FS#713).
Minor IP6 parameter updates can cause Unbound reload events every
few minutes. List option 'trigger' selects which interfaces may
cause reload. For example 'lan', 'wan' but not 'wan6'.
Squash other cosmetics.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Below are changes in the packaging method
- Use tarball provided by the upstream project maintainer instead of
cloning the whole git-repo
- Drop openssl variant as it was deprecated then removed by the
upstream project
- Add dependency on libev, libsodium, libudns as they are not bundled
with the source code anymore
Addresses issue #4191
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Convert init-script to procd and allow to configure
isc-dhcp-server via UCI. Allow most by-network and by-host options
supported by dnsmasq.
User-defined dhcp-options are not supported yet, neither are tags.
Existing configurations with use-edited /etc/dhcpd.conf are still
respected, hence to enjoy the new features you have to migrate
your configuration to UCI and delete /etc/dhcpd.conf.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* made wget default parms compatible with older program versions
* shift dns detection routine to simplify dns override,
just set 'adb_dnslist' to force a particular backend priority
(default: 'dnsmasq unbound')
* reduce ubus polling during dns detection
Signed-off-by: Dirk Brenken <dev@brenken.org>
* always update the connection status, even in case of an error
* merge multiple ubus network calls in central check routine
Signed-off-by: Dirk Brenken <dev@brenken.org>
* Update to 1.9.5
* Use PKG_HASH instead of PKG_MD5SUM
* Add dnscrypt-proxy github link in PKG_SOURCE_URL
Signed-off-by: Damiano Renfer <damiano.renfer@gmail.com>
aTanW
Florian Fainelli
Bjørn Mork
Stephen Walker
Peter Wagner
Daniel Engberg
Philip Prindeville
danrl
starcms
Christian Schoenebeck
Stijn Tintel
Antonio Paunovic
Alexandru Ardelean
Karl Palsson
Damiano Renfer
kuoruan
Val Kulkov
Mislav Novakovic
Hans Dedecker
Eric Luehrsen
Yousong Zhou
Kevin Darbyshire-Bryant
Daniel Golle
hmronline
Dirk Brenken
Jason A. Donenfeld
Florian Eckert