This is conflicting with tools/zip where the HostBuild is specified.
This should allow the zip package to show up.
Several cleanups were also performed for consistency between packages.
Added PKG_BUILD_PARALLEL:=1 for faster compilation.
Remove PKG_CHECK_FORMAT_SECURITY. Patched the issue instead.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Latest fft-eval has some extra features such as ath11k support, double precision in json signal calculation, and cleanups (batctl references, minor bugfixes, etc )
This commit is a version and makefile update. Now the native project Makefile do the job (compilation and linking).
Signed-off-by: Kirill Lukonin <klukonin@gmail.com>
New patches (both for SConstruct):
* Do not import from distutils. Since Python support/modules are not
built, there is no need to import from distutils. (Importing from
distutils may prevent the package from being built on systems without
a full distutils module, e.g. Debian with python3-minimal.)
I have added back the import in places where it may be helpful to
have, if scons is run manually.
Fixes#10993.
* Do not check the size of time_t. The way this is done is to compile
and run a test program; this fails when cross-compiling[1].
This doesn't appear to affect any functionality (other than missing a
compile-time warning that things will fail in 2038 if time_t is too
small).
[1]: https://gitlab.com/gpsd/gpsd/issues/48
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
DEPENDS attribute makes canutils fail on installation procedure
Removing it makes a successful build
Signed-off-by: Paulo Machado <pffmachado@yahoo.com>
The regular Makefile is totally broken and does not pass CFLAGS. This
breaks compilation with PKG_ASLR_PIE and also does not pass -Os.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The last OpenOCD release was 3 years ago, plenty of new functionality
was added since then. Two security-related patches went in too.
While at it, add a menuconfig option to allow building without any USB
dependencies, useful for devices counting on sysfsgpio to access
targets.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Fix the dependency declaration by removing the unnecessary/illegal
commas:
> WARNING: Makefile 'package/feeds/packages/smartmontools/Makefile' has a dependency on 'smartd,', which does not exist
> WARNING: Makefile 'package/feeds/packages/smartmontools/Makefile' has a dependency on 'nail,', which does not exist
> tmp/.config-package.in:153368:warning: ignoring unsupported character ','
> tmp/.config-package.in:153373:warning: ignoring unsupported character ','
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Updated URL list. Changed to HTTPS also.
Added PKG_BUILD_PARALLEL for faster compilation.
Added PKG_INSTALL as is standard with most packages.
Small optimization to shell script.
Added two patches to fix compilation. Refreshed the other one.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Fix PKG_LICENSE
Switch to standard PKG_INSTALL to simplify the Makefile.
Add PKG_BUILD_PARALLEL for faster compilation.
Add URL.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
A separate package which depdens on msmtp and nail is introduced.
Once more packages provide `sendmail` and `mail` interfaces, this
dependency can be made more flexible.
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
saned requires write access scanner USB bus for its process and
to usblp/bind in order to rebind multifunctional printers back
to usblp (for printing with p910nd).
A hotplug script monitor new USB devices for scanners. Scanners
are detected by searching /usr/share/sane/<vendor>-<backend>.usbid
for the device product_id.
The package saned creates user saned:scanners. Access is granted to
group scanners.
The default xinetd conf was updated to run as saned:scanner.
sane-daemon pkg now has a postinst trigger that runs udevtrigger for
granting perms where there are connected scanners during installation.
Existing hotplug scripts from hplip were removed. They were mostly
useless.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
cxxabi.h is a useless header that libcxx does not include.
Remove indent on postint script. It should be on the same as the above
section.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Busybox in default uses SHA512 as well.
On big ditribution this default is sourced from PAM. That means that
shadow reads pam settings and uses that. OpenWrt in most cases does not
have PAM installed and in such case shadow fallbacks to its own default
which is DES. This just changes that default to SHA512 which is
consistent with rest of the system.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
The postrm script was missing shebang. Postrm scripts are packaged and
executed directly and not sourced by default script (as in case of prerm
and postinst).
Also move some indents around to not confuse reader. The section in
postinst was indented to same level as grep "condition" but is on same
level as initial grep (not part of that "condition").
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
usbmuxd must be ran for many of the idevice tools. Added an init
script to make this easier.
Added myself as maintainer.
Fix PKG_CVE_ID.
Added config directory.
Placed in a submenu for easier readability.
Add extra tool
Signed-off-by: Rosen Penev <rosenp@gmail.com>
018f57e713fa cmake: bump version to 1.0.1
b90c65be87c5 ubus: add state method
034e3a77680d scene: add dumping of state to blobmsg
d21b0946e6f6 scene: add all LEDs during scene creation
f31a6f2b8c3b led: add dumping of state to blobmsg
cead0f7f54f6 add support for scenes with priorities
8637a86307d7 led: remove string format from led_state_str
0eaa67a5a687 led: add led_from_path
8243708905aa tests: add basic blob-led unit test
99bcdaa306f7 refactor blob LED parsing into separate unit
210c5e3c5128 led: change sysfs LED path for unit tests
310a676e50d7 add cram based unit tests
eb7acbb08e36 led: led_add: add debug output
ca9c762fb29a led: make timer tick interval variable
44d072039680 led: allow running and stopping
df0c7772c9c6 timer: add missing includes
2aab48d1143c cmake: add sources into static library
83d4189606ca fix multiple timer drifts by using singular timer for all LEDs
3abe097ebecf log: output function name in debug log messages
5c768b337df8 led: set current brightness only after success
cf93720951bc allow overriding of default ubus socket path
b642b650a612 led: fix initial LED fading out
ba00ca0e886c fix deprecated SPDX license identifier
766448f68e69 convert content of README into Markdown format
079e773e3250 rename README into README.md
76eb126d9eb5 add LICENSE file
7a006926c442 add initial GitLab CI support
cc94cd4c59b0 replace stderr based logging with ulog
7aa9c35a9581 add basic application versioning
ecd26be4c5dd add basic logging
cc42a9c79ad9 factor out ubus stuff into separate unit
13a589678c29 factor out led stuff into separate unit
7763972de980 fix sign issue spotted by compiler
aef09580c960 cmake: enable extra compiler warnings
97663b4e1d15 cmake: fix include dirs and libs lookup
875a9e15b10a fixes a small bug that failed to reset the state to LED_SET when reconfiguring a LED
Signed-off-by: Petr Štetiar <ynezz@true.cz>
"This program is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License version 2.1"
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Rosen Penev
Yuhei OKAWA
Kirill Lukonin
Jeffery To
Paulo Machado
Josef Schlehofer
Paul Fertser
Daniel Golle
Hannu Nyman
Maxim Storchak
Luiz Angelo Daros de Luca
Michael Heimpold
Florian Fainelli
Markus Weippert
Karel Kočí
Yousong Zhou
Petr Štetiar
Marcin Jurkowski