Refreshed patches.
And apply hack for line-endings in pep517 (from pip).
Hack comment:
# FIXME: [1] get rid of this asap; 'patch' doesn't like Windows endings, and this file is full of them...
# I actually tried this in a number of ways and the only way to fix this is to implement
# a poor-man's dos2unix using sed.
# The issue is with the pip package; it seems that it throws in some Windows line-endings
# and 'patch' won't handle them. So, we do a "dos2unix" and then patch.
# We can get rid of this once this is solved upstream and in pip:
# https://github.com/pypa/pep517/pull/130
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The addressed issue is related to #6893 as its resolution
is actually causing the problem.
When changing the priority of the config file it happens
that after a sysupgrade the previous file is restored
and the new file is added, ending up in a situation
like this:
/etc/php7/15_openssl.ini
/etc/php7/20_openssl.ini
Causing a double extension=openssl.so to be parsed,
which is not appropriate and leads to error message.
The same problem might also occur for mysqli since there
was also a priority change - let's take care about this
at the same time.
The solution is to remove one of the files. Since it is
a configuration file, the user might have adjusted it, so
lets just use the previous version to replace the new
installed version.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Changelog:
- Bumped upper bound of the chardet runtime dependency to allow their v4.0 version stream.
From a1158c5389/CHANGES.rst
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
It often happens that we update a package to a new version (e.g. cffi) to a
newer version, but we forget to update the version for cffi in the
`lang/python/host-pip-requirements/cffi.txt` file.
This check adds a minimal check, so that when a build occurs for a Python
package, if there is a mention/listing of this package in
`lang/python/host-pip-requirements/` it will check that the versions match.
This way, when we update a package, we get a build failure and update the
host version as well.
This will omit packages (like Cython) that are not packaged for OpenWrt,
but are host-side dependencies only.
But until we find some mechanism to check for those, we will probably only
notice to update them when another build occurs (at the very least).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Django 1.11 (host-build) is only needed for Seahub.
And won't ever be needed for anything else (hopefully).
This change moves it to the Seahub folder.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* update license (changed in 1.2.0)
* removed python3-six dependency (removed in 1.0.0)
* do not install tests
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
I tried to install matplotlib by using pip and it failed with the following output:
2021-08-18T11:52:26,171 Collecting matplotlib
2021-08-18T11:52:26,173 Created temporary directory: /tmp/pip-unpack-wuth2u0e
2021-08-18T11:52:26,565 Using cached matplotlib-3.4.3.tar.gz (37.9 MB)
2021-08-18T11:52:38,659 Added matplotlib from https://files.pythonhosted.org/packages/21/37/ 197e68df384ff694f78d687a49ad39f96c67b8d75718bc61503e1676b617/matplotlib-3.4.3.tar. gz#sha256=fc4f526dfdb31c9bd6b8ca06bf9fab663ca12f3ec9cdf4496fb44bc680140318 to build tracker '/tmp/pip- req-tracker-u30x8pht'
2021-08-18T11:52:38,660 Running setup.py (path:/tmp/pip-install-afiyiers/ matplotlib_8e717e38862f4976a3d6cb1832ba3261/setup.py) egg_info for package matplotlib
2021-08-18T11:52:38,661 Created temporary directory: /tmp/pip-pip-egg-info-kbtiezxq
2021-08-18T11:52:38,662 Running command python setup.py egg_info
2021-08-18T11:52:38,831 Traceback (most recent call last):
2021-08-18T11:52:38,832 File "<string>", line 1, in <module>
2021-08-18T11:52:38,832 File "/usr/lib/python3.9/site-packages/setuptools/__init__.py", line 8, in <module>
2021-08-18T11:52:38,833 ModuleNotFoundError: No module named '_distutils_hack'
More details about it:
- https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968410
Once I applied the patch from the bug tracker, I got further to install
it.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Avoid parallel relinking and usage of the host perl binary by wrapping
its usage around flock calls.
Sometimes, two packages will try to relink the static host perl binary
at the same time. Neither of them will have the other's module linked
in, and one of them will unavoidably clobber the other one's binary.
This will lead to errors when a package will not be able to find a
module that was supposed to be installed.
To fix that, an exclusive flock is used when relinking, with a 900
seconds timeout to avoid locking up the build process forever.
This is not enough because the binary may be concurrently used to build
another module package; perl is used in Configure, Compile, and Install
procedures. If timing is right, a package will fail with a "permission
denied" error.
So a shared flock call is added in Configure, Compile, and Install
definitions for host and target, with a shorter, 300 seconds timeout.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Changelog:
PycURL 7.44.0 - 2021-08-08
--------------------------
This release reinstates best effort Python 2 support, adds Python 3.9 and
Python 3.10 alpha support and implements support for several libcurl options.
Official Windows builds are currently not being produced.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
If TOPDIR starts with /usr, then the configure script will use the
staging tree hierarchy instead of using plain /usr/lib. For example, if
TOPDIR=/usr/src/openwrt, then the files will not be available under
$(PKG_INSTALL_DIR)/usr/lib/lua/5.1/, as expected, but under
$(PKG_INSTALL_DIR)/usr/src/openwrt/staging_dir/hostpkg/lib/lua/5.1/.
Set the correct path when calling 'make'. As a bonus, the hardcoded
version number in the Makefile can be dropped.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
When installing a host perl module, the host perl binary in the staging
dir is replaced by using 'cp'. However, if the binary is running in a
parallel job, cp will fail with a text file busy error. Use
$(INSTALL_BIN), which unliks the file first to avoid the error.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
- BACKWARDS COMPATIBILITY:
- Deprecated the distro.linux_distribution() function. Use
distro.id(), distro.version() and distro.name() instead [#296]
- Deprecated Python 2.7, 3.4 and 3.5 support. Further releases will
only support Python 3.6+
- ENHANCEMENTS:
- Added type hints to distro module [#269]
- Added __version__ for checking distro version [#292]
- Added support for arbitrary rootfs via the root_dir parameter
[#247]
- Added the --root-dir option to CLI [#161]
- Added fallback to /usr/lib/os-release when /etc/os-release isn't
available [#262]
- BUG FIXES:
- Fixed subprocess.CalledProcessError when running lsb_release
[#261]
- Ignore /etc/iredmail-release file while parsing distribution
[#268]
- Use a binary file for /dev/null to avoid TextIOWrapper overhead
[#271]
- RELEASE:
- Moved repository from nir0s/distro to python-distro/distro on
GitHub.
Signed-off-by: Javier Marcet <javier@marcet.info>
This package was updated without a hash change.
Fixes: c157522580 ("pyodbc: update to version 4.0.31")
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
July 2021 Security Releases:
Use after free on close http2 on stream canceling (High) (CVE-2021-22930)
Node.js is vulnerable to a use after free attack where an attacker might be able to exploit the memory corruption, to change process behavior.
You can read more about it in https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2021-22930
Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
Josef Schlehofer
Alexandru Ardelean
Jeffery To
Michael Heimpold
Kerma Gérald
Robert Högberg
Michal Vasilek
Karl Palsson
Eneas U de Queiroz
Stepan Henek
Javier Marcet
Tianling Shen
Daniel Golle
Hirokazu MORIKAWA