Update to 0.9.10 due to https://prosody.im/issues/issue/585
The init script seems to block, as "prosodyctl start" started to block
at least on my configuration. I switched to a procd init script, which
deals with blocking processes.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
Add uci option mppe which makes the mppe parameter configurable;
the default value is required,no40,no56,stateless as before.
Add uci option logwtmp; when enabled updates wtmp when users
connect and disconnect
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* fix root cause for https timeout issues
* fix startup issues via luci
* detach init start process to fix luci timeout issues
* fix html header in adblock pages
* fix adblock.conf options to single quotes
Signed-off-by: Dirk Brenken <openwrt@brenken.org>
* openwrt init system support, see /etc/init.d/adblock
* support for two new adblock sources: openphish and ruadlist/easylist
* partial block list restore, i.e. if a single list download failed
* fix performance regression on sites with links to https ad servers
* removed no longer used samples dir
* updated documentation
Signed-off-by: Dirk Brenken <openwrt@brenken.org>
- renamed (lower case) filenames and servicenames for no-ip.com, cloudflare.com and bind_nsupdate including modifing existing configurations #2375
- updated tld_names.dat
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
- fix build error reported by buildbot by disabling krb5
- libcom_err from krb5 is used - configure output:
configure: WARNING: library 'com_err' is required for Heimdal Kerberos
- krb5 has its own libcom_err (see krb5 package) with its own symbols
- linking with wrong libcom_err from libext2fs produces errors during
libgssapi_krb5.so: undefined reference to `error_message@com_err_3_MIT'
libgssapi_krb5.so: undefined reference to `remove_error_table@com_err_3_MIT'
libgssapi_krb5.so: undefined reference to `add_error_table@com_err_3_MIT'
-> remove libext2fs dependency (wasnt working anyway - no PKG_BUILD_DEP)
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* upstream to Privoxy 3.0.24
* add facility to set compile options
* add file list to be saved on sysupgrade
* fixed PKG_MAINTAINER string
* add port 8118 used by privoxy to /etc/services
* new "boot_delay" option (default 10 seconds) to wait for interfaces to come up before hotplug restarts are enabled
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
- new function expand_ipv6()
- expand IPv6 before compare https://dev.openwrt.org/ticket/21725
- Fix split_FQDN() to return host.subdomain correctly #2334
- modified check for musl library used by nslookup #2341#2346 thanks to Arjen de Korte
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
- fix possible race condition during startup
- fix duplicate logging during startup
- fix wget parms to prevent partitial downloads
- fix iptables rules to meet openwrt user chains
- added a rule in output chain to reject local ad related requests as
well
- changed default IPv4/IPv6 blackhole ip address to fix routing issues
with windows clients
Signed-off-by: Dirk Brenken <openwrt@brenken.org>
Use libevent2 instead of libevent
Update copyright to 2016
Bump PKG_RELEASE due to package changes
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
As said in a related github discussion thread [1], OpenWrt is so small a
system that
- "airmon-ng check kill" does not have much to check
- airmon-ng takes up too much space for not that much benefit (bringing
up monitor interface with just iw should be enough for at least b43
and ath9k drivers)
Airmon-ng depends on a lot of utility binaries to run and these
dependencies increase the installation size. With this commit we can
provide a working airmon-ng and a smaller aircrack-ng package.
Dependency spec of airmon-ng is also reworked to
- select usbutils only if USB feature is available
- select pciutils only if PCI feature is available
While doing the split, this commit also contains a few other minor
changes
- Use SPDX identifier for license name.
- Add PKG_LICENSE_FILES definition.
- Set PKG_MAINTAINER (MAINTAINER variable will take value from it).
[1] https://github.com/openwrt/packages/pull/1693
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* "zero-conf" installation & setup, usually no manual config changes
required (i.e. ip address, network devices etc.)
* full IPv4 and IPv6 support
* new adblock list source (malwaredomainlist.com)
* adblock related statistics will be done by iptables
* removed curl dependency
* for IPv6 support you need 'kmod-ipt-nat6'
* fix Chaos Calmer compability
* various small changes & fixes
* updated documentation
* updated maintainer email address
Signed-off-by: Dirk Brenken <dirk@brenken.org>
- [PATCH 11/13] BUG/MEDIUM: peers: table entries learned from a remote
- [PATCH 12/13] BUG/MEDIUM: peers: old stick table updates could be
- [PATCH 13/13] CLEANUP: haproxy: using _GNU_SOURCE instead of
Signed-off-by: heil <heil@terminal-consulting.de>
fixes:
* path traversal vulnerability in mod_http_files (CVE-2016-1231)
* use of weak PRNG in generation of dialback secrets (CVE-2016-1232)
Signed-off-by: heil <heil@terminal-consulting.de>
- add support for "hostip" to get_registered_ip() as alternative to "Bind host" package https://dev.openwrt.org/ticket/20893#comment:5
- allow to send updates using compiled-in certificate file/path of curl/wget #2242#2243#2245
- add support for uclient-fetch / libustream-ssl.so
- remove /128 prefix-filter in get_local_ip() via interface #2268
- add dyndns.org to services_ipv6 https://forum.openwrt.org/viewtopic.php?id=62103
- readd duckdns.org to services #2251 (lost somewhere in data heaven)
- add zzzz.io service #2302
- updated tld_names.dat
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Import cifs-utils from old packages:
* update to 6.4
* add upstream patch to fix builds with musl
* add license information
* add myself as maintainer
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Building both variants improperly tried to include the passwd utility
for the non-ssl variant, as the variable was set for the ssl variant.
Use properly separated install tasks to install additional files, rather
than hacking around inside the single target.
Signed-off-by: Karl Palsson <karlp@remake.is>
Many users of the SSL build of mosquitto need the passwd utility for
managing keys.
Fixes github issue #1909
Signed-off-by: Karl Palsson <karlp@remake.is>
Nikos Mavrogiannopoulos
Dirk Brenken
Stefan Hellermann
Hans Dedecker
Miroslav Lichvar
Alexander Ryzhov
Toke Høiland-Jørgensen
Daniel Salzman
Christian Schoenebeck
Othmar Truniger
Dirk Neukirchen
Peter Wagner
Daniel Golle
Damiano Renfer
diizzyy
Dov Murik
Yousong Zhou
Florian Fainelli
heil
Dirk Feytons
Michael Heimpold
Felix Fietkau
Noah Meyerhans
Steven Barth
Stijn Tintel
Karl Palsson
Jo-Philipp Wich
Heinrich Schuchardt