Signed-off-by: Andrew Mackintosh <amackint@waikato.ac.nz>
Maintainer: me / @null-cipher
Compile tested: Raspberry Pi 3 / brcm2708-bcm2710, OpenWrt 19.07.4
Hyper-V VM / x86_64, OpenWrt 19.07.4
Run tested: Raspberry Pi 3 / brcm2708-bcm2710, OpenWrt 19.07.4
Hyper-V VM / x86_64, OpenWrt 19.07.4
Description:
The NetStinky IDS is a component of the NetStinky suite of tools. It
monitors the traffic on the LAN interfaces of your router for
Indications of Compromise (IoCs), drawn from an auto-updating list of
definitions. IoCs are subsequently reported to the NetStinky smartphone
applications.
In recent commits, there were removed Transmission SSL variants and
there is just used one variant of transmission-daemon. Let's adjust it here as well.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
It was somewhat opaque how the variable a is questioned. To show this
better the variable is now a string and not a boolean. So you can see
directly what should happen. With a boolean you always have to think
about what it means when 0 or 1 is used.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Replace locks on /var/run/mwan3.lock with locks via procd.
This fixes a deadlock issue where mwan3 stop would have a procd
lock, but a hotplug script would have the /var/run/mwan3.lock
Locking can be removed from mwan3rtmon since:
1) procd will have sent the KILL signal to the process during
shutdown, so it will not add routes to already removed interfaces on
mwan3 shutdown and
2) mwan3rtmon checks if an interface is active based on the
mwan3_iface_in_<IFACE> entry in iptables, and the hotplug script
always adds this before creating the route table and removes it
before deleting the route table
Fixes github issue #13704
(https://github.com/openwrt/packages/issues/13704)
when the network procd service restarts, it flushes the ip rules. We
need to add these rules back. Since hotplug events are triggered when
the networks come back online, adding this call to the hotplug script
is the most convenient place to refresh the rules.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
he line is too long. For the future it is better to split it into
several lines and make it more clearly arranged. In case of a future
change, not the whole line will be marked as a change.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Will only run when no events are pending.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
[ Update description and split into own commit ]
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Initialize TRACK_OUTPUT has been set after INTERFACE variable initialization.
Move definition into main fixes this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
In a recent commit, there was a fixed typo in config file of rp-ppoe
package. As there was no increased version in PKG_VERSION/PKG_RELEASE,
it means that fixed typo will be applied for users, who install
rp-pppoe now. Existing users will not be aware that there is an updated
package with fixed typo. They will need to do force overwrite/reinstall via opkg.
It makes a little bit complicated as we are fixing typo in conffile, but
this change will be applied to users who do not touch it. In any case,
there should be a bumped version.
Fixes: fe709078ff ("rp-pppoe: fix typo")
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
DNS flag day 2020, software should reflect the minimum EDNS 1232 bytes.
Added iface_wan and iface_lan to control internal DNS assignemnts and
to control what is local service ACL. Interface wild cards are not
explicitly set so that they can be customized in extended conf.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
* removed test.sh script from package
Signed-off-by: Dirk Brenken <dev@brenken.org>
* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
* removed logd dependency, see #13820 for reference
Signed-off-by: Dirk Brenken <dev@brenken.org>
* since openwrt master has merged the depending P/R, the old
extra_help/extra_commands syntax is no longer working, see #13798 for
reference
Signed-off-by: Dirk Brenken <dev@brenken.org>
libudev-zero as well as libudev-fbsd have PROVIDES:=libudev . These
packages have nothing specific that requires one or the other.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
If procd relaunches the ModemManager daemon after e.g. a crash, we
also want it to notify all cached hotplug events, or otherwise we
would end up leaving the daemon running without the full initial
processing done.
This change modifies the init script to include all the required init
commands as part of the procd instance command, so that procd launches
all of them on every respawn.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Boost headers try to include experimental/string_view when std is less
than c++17. This does not work ith libcxx where this header is not
present.
Refreshed patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
- DNS Flag Day 2020
(default EDNS buffer size changed from 4096 to 1232 bytes)
-- Added patch, which should be part of the next release
It fixes an issue while cross-compilation (I linked it in the commit
message with issue link)
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
When the ModemManager daemon is started by the init script, we're
explicitly calling mm_report_events_from_cache() so that all the
hotplug events that happened before that moment are properly notified
to the newly launched daemon.
This initial reporting of events does a wait for the ModemManager
process to be available in DBus, and if the daemon isn't registered in
the bus in a given time, the process is considered failed:
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:03 2020 [2180]: <info> ModemManager (version 1.14.6) starting in system bus...
Sun Sep 6 16:20:03 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:04 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: error: couldn't report initial kernel events: ModemManager not running
Update the default wait time for this initial event notification from
10s to 60s, because there are cases where the daemon is slower to
boot, e.g. during the first boot after a sysupgrade.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Extend configuration of NTP sources in UCI:
- Add nts option to enable NTS
- Add disabled option to allow inactive sources
Add nts section to UCI with:
- rtccheck option to disable certificate time checks on systems that
don't have an RTC to avoid the chicken-and-egg problem (it is less
secure, but still should be better than no NTS at all)
- systemcerts option to disable system certificates
- trustedcerts option to specify path to trusted certificates
Save NTS keys and cookies by default to avoid unnecessary NTS-KE
sessions when restarted or switching back to an already used NTS source.
Also, save the drift to stabilize the clock after chronyd restart.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
- Use the chronyc onoffline command to update state of all sources
per current routing configuration
- Don't ignore the "ifupdate" action
- Add NTP servers from DHCP for the interface that went up instead of
the wan4+wan6 interfaces
- Save the servers to files loaded by the sourcedir directive to not
lose them when chronyd is restarted, and remove them when the
interface goes down
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
Instead of loading /etc/chrony/chrony.conf from the file generated from
the chrony UCI configuration, use the confdir directive in the main
config to load the generated file. This should make it obvious that
chrony is configured in UCI and it can also be easily disabled.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
Javier Marcet
Andrew Mackintosh
Maxim Storchak
Josef Schlehofer
Christian Lachner
Florian Eckert
Aaron Goodman
Helge Mader
Rosen Penev
Eric Luehrsen
Peter Stadler
Jianhui Zhao
Dirk Brenken
Aleksander Morgado
Miroslav Lichvar
Yousong Zhou
Daniel Golle
Jan Pavlinec