Script priority adjusted.
Custom memory management turned off to save some memory on low-end device.
Signed-off-by: Antonio Paunovic <antonio.paunovic@sartura.hr>
backend:
* add new 'manual mode' to re-use blocklist backups during startup,
get fresh lists only via manual reload or restart action
* additional free memory check during dns restart to prevent OOM errors
* removed palevo tracker from default config,
this tracker has been discontinued
* cosmetics
LuCI frontend (see luci repo):
* add new 'manual mode' under extra options
Signed-off-by: Dirk Brenken <dev@brenken.org>
The smartsnmpd SConstruct file only accepts setting CFLAGS and does not
use CPPFLAGS, so pass both down using CFLAGS.
This fixes build errors with external toolchains that don't
automatically search for headers in $(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Make sure we pass down TARGET_CPPFLAGS and TARGET_LDFLAGS to fix build
with external toolchains that don't automatically search for headers and
libraries in $(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This was removed in LEDE commit 0b7ed65cec
("kernel: remove out of tree direct-io disable hack")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
After checking in the ipkg-install dir of netatalk,
it seems that the permissions it sets to the conf-files
are 644.
# ls -la lede/build_dir/target-mips_24kc_musl/netatalk-3.1.11/ipkg-install/etc
-rw-r--r-- 1 sandu sandu 226 iun 5 20:53 afp.conf
-rw-r--r-- 1 sandu sandu 1948 iun 5 20:53 dbus-session.conf
-rw-r--r-- 1 sandu sandu 25037 iun 5 20:53 extmap.conf
While the Package/netatalk/install build rule overrides
them to 600.
According to
* https://github.com/openwrt/packages/issues/4318
* https://forum.lede-project.org/t/help-with-apple-filesharing-protocol-for-time-machine/3259/5
this is a problem in some setups.
So, this patch changes them to what the netatalk
package creators intended initially (i.e. 644).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The earlier commit ea119211b2 removed 'dsa' as one of the ssh_host_*_key
types that got generated. Problem was that it didn't remove that key
as one of the paths that the server looks for by default. As a
consequence, your log file might fill up with messages like:
2017-06-01T15:43:07-06:00 openwrt sshd[31929]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key
The patch is forunately trivial. Don't set the path for the dsa
key file in the server configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The author (@pprindeville) of the original commit noted that the wrong
commit was picked, see
325b7d2cd2 (commitcomment-22387528)
"Err... looks like the wrong fix got committed. I was hoping that this
commit d902e5d would have gone in instead."
This reverts commit 325b7d2cd2d6e9d4903c6e7628c7c9ae0ddab564.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes the following build error with an external toolchain:
./bld/sqlite3.o: In function `fts5Bm25Function':
sqlite3.c:(.text+0x27234): undefined reference to `log'
./bld/piechart.o: In function `piechart_render':
piechart_.c:(.text+0x430): undefined reference to `sincos'
piechart_.c:(.text+0x47c): undefined reference to `sincos'
piechart_.c:(.text+0x548): undefined reference to `sincos'
collect2: error: ld returned 1 exit status
src/main.mk:526: recipe for target 'fossil' failed
make[3]: *** [fossil] Error 1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This backports a patch that has been accepted upstream in linuxptp:
8b61aa2c3f ("udp: Avoid including
netdb.h") to fix build errors with external glibc toolchains that
provide rpc/types.h.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Conserver is an application that allows multiple users to use
serial consoles at the same time, with logging. It has a client-
server design which makes it easy to manage a distributed set
of serial consoles. Logging makes post-crash analyses easier.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
types that got generated. Problem was that it didn't remove that key
as one of the paths that the server looks for by default. As a
consequence, your log file might fill up with messages like:
2017-06-01T15:43:07-06:00 openwrt sshd[31929]: error: Could not load host key: /etc/ssh/ssh_host_dsa_key
The patch is forunately trivial. Don't set the path for the dsa
key file in the server configuration.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Peter Wagner <tripolar@gmx.at>
From upstreams changelog:
This rather large snapshot touches quite a few sensitive areas, so I'm
releasing it now rather than later to receive feedback on any possible issues.
It also contains fixes, so everybody should upgrade.
* man: fix psk mention in wg-quick man page
* man: update wg-quick(8) to show Debian resolvconf braindamage
Documentation cleanups.
* wg-quick: use src routing for default routes in v6
ip-rule(8) doesn't do the right thing with source addresses, unless we
explicitly set it inside the route. This fixes wg-quick on IPv6 systems.
* curve25519: actually, do some things on heap sometimes
* curve25519: align the basepoint to 32 bytes
* curve25519: add NEON versions for ARM
* data: enable BH during parallel crypto on ARM/NEON
* chacha20poly1305: move constants to rodata
* chacha20poly1305: add NEON versions for ARM and ARM64
We now have faster primitives on ARM and ARM64 processors, which should
improve performance.
* handshake: process in parallel
Handshakes are now processed in parallel using all cores, which should improve
throughput during a storm.
* noise: no need to store ephemeral public key
* noise: precompute static-static ECDH operation
We can precompute the ECDH(s, s) calculation, which improves handshake
initiation message performance by double.
* style: spaces after for loops
* peer: use iterator macro instead of callback
The most unreadable C ever produced. It might be wise to find a sexier-looking
alternative at some point.
* compat: remove warning for < 4.1
* compat: ship padata if kernel doesn't have it
The usual array of annoying compat things.
* rust test: convert screech test to snow
* rust test: add icmp ping
We now use Jake's snow library for Noise in the test, which we've expanded to
complete a ping.
* config: do not error out when getting if no peers
* tools: allow creating device with no peers
Fixing some small things in the tool/config interaction.
* device: keep going when share_check fails
* routingtable: remove unnecessary check in node_placement()
* config: it's faster to memcpy than strncpy
* timers: fix typo in comment
Nits.
* debug: print interface name in dmesg
For those who compile with `make debug`, you'll be happy to see a bit better
information in dmesg.
* timers: rework handshake reply control flow
* timers: the completion of a handshake also is on key confirmation
* timers: reset retry-attempt counter when not retrying
Tightening up our timer implementation, which is quite important.
Signed-off-by: Dan Luedtke <mail@danrl.com>
Since we're using the kernel's module, this is
un-necessary.
Should speed up the build a bit.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Admittedly I never used those Python libs.
And the setup I was trying it on, did not have
the Python interpreter packaged, so these build failures
went un-noticed.
That's my fault for not trying it out properly on
a full LEDE repo, with all packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Antonio Paunovic
Federico Di Marco
Dirk Brenken
Karl Palsson
W. van den Akker
Florian Fainelli
Sami Olmari
Alexandru Ardelean
Philip Prindeville
Daniel Golle
aTanW
Bjørn Mork
Peter Wagner
Daniel Engberg
danrl
starcms
Christian Schoenebeck
Stijn Tintel
Damiano Renfer
kuoruan
Val Kulkov
Mislav Novakovic