If the interface goes into failure state (is disconnecting)
then with this change one hotplug.d event is generated.
The same is true for the recovery state (is connecting), when the interface
comes back from a failure state.
In both cases, a hotplug.d event for the iface is triggered. Once
with the $ACTION=disconnecting and once for the $ACTION=connecting.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
By default, ping does a reverse DNS of the IP that you are pinging.
When you have a network issue (such as when a link has just gone down
and you haven't yet marked it down), this lookup can cause failures on
tests for links that are still good.
This option only works for iputils ping.
For busybox the option is not evaluated, but it is accepted without
throwing an error.
Fixes: #14968Fixes: #14924
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Suggested-by: David Lang <david@lang.hm>
iputils upstream changed build params with version s20200821
Latest OpenWRT iputils ping now appears to report the openwrt
version tag, rather than iputils date tag
This commit sends a test ping to localhost to evaluate the
capabilities of iputils ping.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Allow `mwan3 interfaces` to get uptime via an internal function and
thus remove the dependency on rpcd for `mwan3 interface` calls.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
It was somewhat opaque how the variable a is questioned. To show this
better the variable is now a string and not a boolean. So you can see
directly what should happen. With a boolean you always have to think
about what it means when 0 or 1 is used.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Replace locks on /var/run/mwan3.lock with locks via procd.
This fixes a deadlock issue where mwan3 stop would have a procd
lock, but a hotplug script would have the /var/run/mwan3.lock
Locking can be removed from mwan3rtmon since:
1) procd will have sent the KILL signal to the process during
shutdown, so it will not add routes to already removed interfaces on
mwan3 shutdown and
2) mwan3rtmon checks if an interface is active based on the
mwan3_iface_in_<IFACE> entry in iptables, and the hotplug script
always adds this before creating the route table and removes it
before deleting the route table
Fixes github issue #13704
(https://github.com/openwrt/packages/issues/13704)
Will only run when no events are pending.
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
[ Update description and split into own commit ]
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Initialize TRACK_OUTPUT has been set after INTERFACE variable initialization.
Move definition into main fixes this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
- support trailing route space from iproute2
- add routes even when iface is down
- fix source_routing argument check
- add quotes in logging to better detect issues with trailing spaces
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Use "mwan3 use" to wrap a command with interface bindings so that you can
avoid the mwan3 rules and test behavior on a specific interface.
eg "mwan3 use wan ping -c1 1.1.1.1"
Additional binding arguments to the command will have their system
calls intercepted and ignored.
eg "mwan3 use wan ping -c1 -I tun0 1.1.1.1" will use the
device associated with "wan", rather than "tun0".
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Rather than using a special mwan3 user to manage mwan3track's tracking
packets, this commit implements a small helper library to bind to
device and to set a fwmark so that the tracking packets can be routed
out of the correct interface.
This provides a consistent method for binding to a device rather than
relying on various packages potentially buggy implementations. For
example: #8139 and #12836
This helper issue also allows for more tracking methods to be added
even if they do not have a command line option to bind to device,
such as iperf3 (eg #13050).
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
start all mwan3mon and mwan3track instances on mwan3 start
if an interface is down when mwan3track starts, it waits
for a signal from the hotplug script to start
procd can then handle stopping all of the scripts when mwan3
is halted
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
handle creation of routing tables in mwan3rtmon to avoid race
conditions and potentially missing routes
handle ipv6 routes that have expiry
update directly connected ipset when routes are added or deleted
add fall through rules so that the default routing table is not
used if no rule in the interface-specific routing table matches
add option to comply with mwan3 source based routing
get default route parameters from main routing table
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
improve startup and runtime performance by
1) moving common startup procedures out of hotplug script when called
from mwan3 start
2) reducing calls to iptables to check status of rules
3) consolidating iptables updates and updating with iptables-restore
4) do not wait for kill if nothing was killed
5) running interface hotplug scripts in parallel
6) eliminate operations in hotplug script that check status on every
single interface unnecessarily
7) consolidate how mwan3track makes hotplug calls
8) do not restart mwan3track on connected events
This is a significant refactor, but should not result in any breaking
changes or require users to update their configurations.
version bump to 2.9.0
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
use only committed uci changes for updating routing table
use functions.sh functions rather than uci command line tool
to find interfaces for routing table.
consolidate rtmon_ipv4 and rtmon_ipv6 functions into a single function
Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>
Fix shellcheck SC2230
> which is non-standard. Use builtin 'command -v' instead.
Once applied to everything concerning OpenWrt we can disable the busybox
feature `which` and save 3.8kB.
Signed-off-by: Paul Spooren <mail@aparcar.org>
This adjustment of the locks fixes the race condition when a mwan3
hotplug script and a mwan3 command are running at the same time.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Due to a missing config load function call, mwan3 start runs ifup for an empty
list of interfaces, thus not calling ifup at all.
This commit introduces the missing config_load call.
Signed-off-by: Michiel Blokzijl <code@m01.eu>
An interface can have both a /64 and a /128 from a provider.
In such a case, use the address from the /64 to do the ping check, not
the /128.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
Pinging IPv6 hosts using an interface as a source specifier seems
troublesome. See https://bugs.openwrt.org/index.php?do=details&task_id=2897
for more detail.
Use the desired source interface's IP address instead.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
Till now we could only ping http targets on port 80. With this change by
adding the config boolean config option httping_ssl we could also ping
https ping targets on port 443.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Sometimes the return value of `ubus -S call network.interface.wan status`
cause `json_load` to return `Failed to parse message data` error.
To avoid this, the JSON data always should be quoted with double quotes.
Signed-off-by: Evren Yurtesen <eyurtese@abo.fi>
Removed quoatation marks from commit heading
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert
Aaron Goodman
Paul Spooren
Michiel Blokzijl
Brian J. Murrell
yurtesen