Adds init.d and config files for nbd-client. Each section holds
parameters of one block device, where section name (eg. nbd0) is NBD
device name.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Network block device server allows to export a block device from router
to remote host. This is particularly useful if no network filesystem
server is feasible or direct access to a block device is needed.
It's been tested for nearly a month on ar71xx (TL-WR842ND) and proved to
be very stable and efficient solution.
The package comes with init.d script and conf.d file allowing to
configure most nbd-server options using standard uci interface.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Makes kmod-ipsec6 requirement dependent on IPv6 support for packages.
This allows to disable unnecessary IPv6 kernel modules, saving
considerable amount of space.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
This update fixes CVE-2014-6272. Change of source URL was needed,
because the older location does not contain the latest version.
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
Despite being just a packaging update, this update packs quite a few changes.
To start things off, we're finally passing perl's testsuite on at least
x86/musl. There are a lot of skipped tests left, as well as some oddities.
Nothing too heavy though. Making this happen was an ongoing effort since the
perl-5.20.1 release.
We still can't run module testsuites and I don't expect all target/libc
combinations to pass yet. So we'll leave test suite support marked as
experimental.
We've also switched from the old collection of target-specific configuration
files to a new, more flexible and easier-to-maintain system based on
perlconfig.pl. It'll generate a suitable configuration file using information
found in it's *.config files as well as command-line parameters passed.
See the POD and files/README.config for details.
Signed-off-by: Marcel Denia <naoir@gmx.net>
This test requires a ps which provides the -f option, as well as suitable output.
We can't provide either with busybox. Just skip it for now.
Signed-off-by: Marcel Denia <naoir@gmx.net>
While setlocale() is present, musl currently doesn't provide a suitable implementation.
It'll silently accept every locale, even if not present at all, defaulting them
to C.UTF-8. This will confuse applications as well as our testsuite(see lib/locale.t).
Even if a locale does exist, it's effects will not apply to an extent that will
satisfy many applications.
Avoid further mischief here and just disable setlocale() for now.
Signed-off-by: Marcel Denia <naoir@gmx.net>
This replaces the previously used collection of configuration files for every single
architecture in conjunction with hacky overrides, which became an increasing burden to maintain.
Fixes a number of outstanding bugs and oddities, with the most important one being the
previously wrong signal order(as shown by ext/POSIX/t/sigaction.t).
See files/perlconfig.pl's POD and files/README.config for details.
Signed-off-by: Marcel Denia <naoir@gmx.net>
Monitor adapters (zeroconf, enet, usb and w1) don't have the reset
routine, causing null pointer dereference in BUS_reset function.
This patch has been submitted upstream:
https://sourceforge.net/p/owfs/bugs/67/
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
This fixes the endless loop waiting for w1 subsystem connector status
message.
According to the 8a0427d kernel commit, the last (status) netlink msg
should have ack=seq, whereas all the others messages should have ack=seq+1.
This patch has been submitted upstream: https://sourceforge.net/p/owfs/bugs/66/.
For independent problem report, see this thread:
https://www.raspberrypi.org/forums/viewtopic.php?f=44&t=98772
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Owfs shared library is quite large (700+ kB) by embedded devices standards.
The code for many different bus master and slave devices is compiled
into single big .so library. Had it been designed as modular,
dynamic-loadable plugins, we could split them into separate packages,
allowing user to install only the plugins he needs.
It's however possible to enable or disable libow features at compile time.
Here are some examples how much space can be saved turning off support for
unneeded devices and features:
- By disabling USB adapter support libusb and libusb-compat is no
longer needed, saving ~70kB of space. Bus masters using usbserial.ko
kernel driver don't need this.
- By disabling debug messages it's possible to reduce shared library
size by 130kB.
This patch adds a menu allowing user to select libow features one wants
built in:
- Bus master support: USB adapters through libusb, i2c adapters, kernel w1
adapters
- General features: zeroconf device announcement, debug messages, owtraffic
bus reports
Default config options preserve previous library configuration i.e.
everything is selected except for owtraffic (which was disabled) and
kernel w1 driver (whose netlink interface has been broken since 2011).
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Owfs daemons lack control scripts. This patch adds init.d scripts for owfs,
owserver, owhttpd and owftpd packages.
Most daemon options (both common libow and program-specific parameters)
are reflected as uci config variables.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Also already mentioned in ba4338d6f7,
the security feature FORTIFY_SOURCE could be set globally.
The current approach tries to undefine and redefine it, however,
the order on the command line prevents this from being successfully, e.g.:
arm-openwrt-linux-muslgnueabi-gcc ... -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -D_FORTIFY_SOURCE=1 ...
`---------------v-------------------' `--------v--------'
AM_CFLAGS OpenWrt params
So to have the original source (static) _FORTIFY_SOURCE=2 define,
the only option is to remove it from AM_CFLAGS completely, and
to pass it after the OpenWrt settings explicitely in the Makefile.
This should fix the buildbots finally.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
The config file shipped with collectd dates from 2010 and
leads to error messages if luci-statistics & collectd are installed,
as it references several plugins not usually installed, or such ones
that have been renamed since then.
For most users, this file is just a placeholder during collectd installation,
as /usr/bin/stat-genconfig from /etc/init.d/luci_statistics will overwrite it.
Sanitize and shorten the placeholder config file:
* Reference actively only the default plugins installed by luci statistics.
* Match the placeholder config with the genuine config from luci statistics.
If somebody uses collectd separately from luci statistics, he will need to
edit these settings anyway.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This brings IoTivity to version 0.9.2 in addition it does the following:
* split C and C++ Stack into two packages
* backport some patches which are adding missing dependencies to the shared libs
* remove patches merged upstream
* add some other patches fixing some problems, most of them are already merged upstream
* activate security and logging support
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
Since openocd depends on hidapi it needs appropriate LD_FLAGS to link
against it as that library depends on libiconv.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Marcin Jurkowski
Steven Barth
Jan Čermák
Jo-Philipp Wich
Álvaro Fernández Rojas
Marcel Denia
Paul Fertser
aTanW
Borromini
Ted Hess
Bruno Randolf
Alexandru Ardelean
Gergely Kiss
Michael Heimpold
Hannu Nyman
Hauke Mehrtens
Roger