Switch to AUTORELEASE for simplicity.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[remove irrelevant part from commit message after splitting changes]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Neither the configure option nor configure variable to disable linking
against PCRE seem to work anymore, so simply drop both and add a
dependency on libpcre. As net-snmp is unlikely to fit on devices with
small flash anyway, the extra size requirement shouldn't be a problem.
If it is, feel free to submit a patch to fix the broken upstream
behaviour.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
There's a build race condition with other packages which sometimes results in:
Package libnetsnmp is missing dependencies for the following libraries:
libpci.so.3
Using an external toolchain, it was discovered that net-snmp would
link with the Perl library (-lperl) from the host rather than from the
target.
Since we do not provide Perl as a dependency to net-snmp, the solution
is to disable support for it.
Fixes issue #8217.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
Disable PCRE process searching to avoid linking against libprce, which
would cause the build to fail due to a missing dependency. With the
--without-pcre switch, build fails due to an undefined reference, so do
it via CONFIGURE_VARS instead.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[disable PCRE process searching]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Commit 384c2a8cfd added support for symlinking
net-snmp-config into $(STAGING_DIR)/usr/bin but forgot to install first
$(STAGING_DIR)/usr/bin resulting into a compile issue if
$(STAGING_DIR)/usr/bin is not yet present.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
This enables the table `inetNetToMediaTable` from `ip-mib`, which implements
the `ipNetToPhysicalTable`. The former one is already enabled with the current
configuraiton, but it has been deprecatd by the IP version-neutral
`ipNetToMediaTable`, which also supports IPv6 entries [1]. It also disables all
other submodules from this MIB to keep the footprint small.
[1]: http://net-snmp.sourceforge.net/docs/mibs/IP-MIB.txt
Signed-off-by: Karol Babioch <karol@babioch.de>
Commit 384c2a8cfd added support for symlinking
net-snmp-config into $(STAGING_DIR)/usr/bin but forgot to install first
$(STAGING_DIR)/usr/bin resulting into a compile issue if
$(STAGING_DIR)/usr/bin is not yet present.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Commit ae5ee6ba6c added support for inbound
firewall rule support but some corner cases were not covered.
In case net-snmp is started and the network interface is already up
the procd firewall rule is created but not applied by fw3 as
service_started calling procd_set_config_changed firewall was missing.
When stopping net-snmp clean up the net-snmp inbound firewall rules in
iptables by calling procd_set_config_changed firewall in stop_service
which will trigger fw3 to remove the inbound firewall rules.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
It seems that UCI can't handle duplicate section names in a single
config file, even if they use different types. After the previous
commit, running `uci export` results in the following error:
uci: Parse error (section of different type overwrites prior section with same name) at line 17, byte 23
Append a 6 to the com2sec6 section names to solve this.
Fixes: 0e1c8b4ccc ("net-snmp: snmpd: listen on IPv6 by default")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
fix Makefile chmod (644)
replace MD5SUM with HASH
add PKG_MIRROR_HASH when PKG_SOURCE_PROTO:=git
(PKG_SOURCE_PROTO:=svn tarballs are not reproducible for now)
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Add enabled config option in the global uci section; it allows to put into
place the snmpd config but not yet start the netsnmp daemon.
If config option is unset; netsnmp daemon will be started as before.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
A lot of autoconf-based scripts expect --with-foo-dir=$(STAGING_DIR)/usr
and break if they can't find bin/foo-config as a child of that path.
Putting things in $(STAGING_DIR)/host/bin seems to be suboptimal; I
could change the install path but there's no saying what that would
break.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Add config support which allow snmpd to take a more active role by sending
traps.
Following config options are supported which map directly on snmpd directives:
-trapcommunity
-trapsink
-trap2sink
-informsink
-authtrapenable
-v1trapaddress
-trapsess
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Add UCI section general which holds the uci parameter network defining on
which interface(s) the snmp agent is reachable for inbound snmp requests
in case the firewall zone does not allow INPUT traffic by default.
For the different zones to which the different interfaces belong firewall
procd input rules are created making the snmp agent reachable on udp port
161.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
According to the snmpd.conf man page, the engineID of an snmp agent
should be consistent through time. However, it seems that the engineID
changes every reboot. Add options to configure how the engineID is
generated. The default setting generates it based on the MAC address of
the eth0 interface.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
We believe snmpd-static isn't useful, but download stats show it's still
being downloaded. Instead of dropping it, make it a dummy package that
depends on snmpd.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Instead of causing nondeterministing conditional compilation depending on
whether libnl-core happens to be present or not, fixup the net-snmp package
to link against libnl-tiny which is present by default on the majority of
systems.
In order to successfully build against libnl-tiny, a number of things had
to be fixed in both the upstream configure and the outer Makefile:
- Add a patch which fixes the upstream configure macros to properly handle
cases where the cache variables for nl_connect() and netlink.h tests are
predefined. Without this patch, all subsequent link tests in configure
will fail, causing the build system to assume functions like opendir() or
readdir() to be missing, leading to build failures later on due to
conflicting redefinitions of structures and function prototypes
- In the same patch, stop probing the host systems /usr/include/libnl-3 if
ac_cv_header_netlink_netlink_h is given. This brings the proprietary
configure bits in line with the behaviour expected from autoconfig in a
cross compile setting
- Explicitely request nl support by passing the --with-nl flag to configure
- Pass the required cache variables to skip the broken tests for
nl_connect() and netlink.h
- Amend TARGET_CPPFLAGS to let net-snmp's build system discover nl-tiny's
netlink/netlink.h and netlink/socket.h
- Enable the autoreconf fixup to regenerate the broken shipped configure
from patched macros
- Adjust the depends to unconditionally require libnl-tiny
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When libnl-core is enabled, but libnl isn't, build fails because of a
missing dependency on libnl-3.so.200. Depending on libnl-core seems to
work for both cases.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Update to 5.7.3 by refreshing patches; remove 800-format-security
as upstream integrated.
Add libnl dependency in the package Makefile as net-snmp will check
if libnl is enabled in config_os_libs2.
Remove unneeded PKG_FIXUP build variable.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
this installs the default MIBS-files under /usr/share/snmp/mibs .
Also aligns the defines to the same sorting-scheme.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Rosen Penev
Stijn Tintel
Jan Pavlinec
Koen Vandeputte
Maxim Cournoyer
Hans Dedecker
Karol Babioch
Etienne Champetier
Philip Prindeville
Jo-Philipp Wich
Sven Roederer
Jo-Philipp Wich
ionum
Steven Barth