To fix the shell local issue in the ubus mwan3 rpcd shell script, move
the switch case statment into a function.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
dhcrelay has the ability to monitor interfaces for requests
in a single direction only rather than listening to all
interfaces for requests.
Doing this allows one to suppress the duplication of having
the relay forward requests from the same network that the
DHCP server is on.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
In a tool like this one, you really want an option to establish if the service
should start or not by default on boot time, especially when its configuration
file has to be customized by the user.
In the configuration file, the new 'enabled' option is setted to '0' by default
since the configuration provided by default will not be the one finally used.
In the init script, the new 'enabled' option is setted to '1' by default in
order to support the previous configuration file behaviour.
Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
Patch 903-no-examples.patch removes MinOZW binary. This is wrong since
install section of openzwave is still using it. We can either remove the
patch or remove install section for openzwave. It seems people are using
this binary so we remove the patch.
After removing the patch the following issue appears with gcc7:
cc1plus: error: -Wformat-security ignored without -Wformat
This is resolved by adding the following to Makefile
TARGET_CPPFLAGS+=-Wno-format -Wno-format-security
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Two issues:
1. The fwknopd init script did not handle unprepared logical networks.
This is fixed by A) not defining instance for procd when the physical
interface is unknown, and B) by watching the logical network for
changes.
2. When using PPPoE, there are two physical interfaces -- one for raw
PPPoE communication and one for wrapped communication. The function
network_get_physdev returns the physical device, while the function
network_get_device returns the wrapped one -- we shall use the
wrapped interface. Usually (for non-wrapped interfaces) the physdev
and device are the same, also other network scripts use the latter
function.
Both issues found by and thanks are going to @lucize.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
Add libidn2 & idn2 tool to repo
Heavily based on PR by Daniel Engberg <daniel.engberg.lists@pyret.net>
Added idn2 tool & heavily based on existing idn Makefile.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Sometimes it's necessary to set per-host options like:
list dhcp_option 'option:always-broadcast,true'
for hosts that don't understand unicast replies. There might
be other options you might want to set on a per-host basis,
such as extensions-path, dhcp-message-text, etc.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Some /etc/config-destined files are in files/ and suffixed with
.conf while others are in files/etc/config/ which isn't consistent.
Put everything in files/ and call it good.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
It was requested as it can be useful under certain circumstances.
Disabled rpc_whitelist by default. Not only is there a firewall, but it denies access when IP address of the device is changed.
Added group support in UCI. Fixes cases where group does not match the user (nobody:nogroup).
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* union 'automatic' and 'trigger' mode, now much more responsive
if an uplink suddenly disappears
* tidy up (disable) travelmate related uplink connections
if you disable the service
* change default config ('trm_automatic' removal)
* documentation update
* LuCI: remove needless 'automatic' and 'trigger' options
plus small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
Considering that ipv6 NPT/NAT/NETMAP is done manually by user,
mwan3 can balance ipv6 interfaces as it does with ipv4.
Interface wan2 was renamed to wanb as wan2, wan3, ... will eventually
colide with OpenWrt with default wan6 interface when more than 6
interfaces are in use.
New interfaces, members for wan6 and wanb6 where created, both disabled
by default. Policies where adapted as well.
The option "family" is set respectively in each interface. When missing,
mwan3 assumes ipv4, that will fail when interface is IPv6 only.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Florian Eckert
Philip Prindeville
Ian Leonard
Brian J. Murrell
Dirk Brenken
Adrià Llaudet
Marko Ratkaj
Daniel Salzman
Oldřich Jedlička
Kevin Darbyshire-Bryant
Moritz Warning
Hannu Nyman
Miroslav Lichvar
Wojciech Dubowik
Peter Wagner
Daniel Golle
Rosen Penev
Daniel Engberg
Denis Shulyaka
Andy Walsh
Ted Hess
Luiz Angelo Daros de Luca