* Add --cache-dir option to set the pip cache to a directory in
$(DL_DIR), instead of pip's default (build user's ~/.cache/pip),
fixes#9066
* Add --disable-pip-version-check option, since the version check only
prints a message saying a new version is available
* Combine host_python_pip_install and host_python_pip_install_host into
Build/Compile/HostPy[3]PipInstall
* Remove --root and --prefix options, since this function is only used
to install packages to host Python's default site-packages directory
(setting these may serve to confuse pip)
* Pass all of $(HOST_PYTHON[3]_PACKAGE_BUILD_DEPENDS) to the function,
since pip can handle multiple arguments/packages
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This was copied over from python-packages, when support for installing
packages host-side (via pip) was added.
Based on the discussion on this commit:
612c53fc6c
it was mentioned that removing this may add more benefit in terms of
reducing build time, because packages won't get reinstalled every time.
I'm not entirely sure about any potential side-effects of this, but it's
worth trying it out.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Since `lang/python` is it's own folder of Python packages
(for both Python 2 & 3), and these build rules are needed
in a lot of packages [especially Python packages],
putting them here makes sense architecturally,
to be shared.
This also helps get rid of the `include_mk` construct
which relies on OpenWrt core to provide, and seems
like a broken design idea that has persisted for a while.
Reason is: it requires that Python 2/3 be built to provide
these mk files for other Python packages,
which seems like a bad idea.
Long-term, there could be an issue where some other feeds
would require these mk files [e.g. telephony] for
some Python packages.
We'll see how we handle this a bit later.
For now we limit this to this feed.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The host pip install should have the host's CFLAGS, LDFLAGS, etc
available.
And not the target's flags.
Otherwise, weird things can happen when installing
packages (host-side) that need to build C code.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The host pip install should have the host's CFLAGS, LDFLAGS, etc
available.
And not the target's flags.
Otherwise, weird things can happen when installing
packages (host-side) that need to build C code.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
To install Python packages host side, that
may be needed for a build.
The intent, is to try to reduce host-side Python
packages being installed via LEDE/OpenWrt build system.
Because those seem like a pain to maintain.
The idea is adapted from Yousong's `python-packages`
package.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
I admit this may be be a bit aggressive, but the lang
folder is getting cluttered/filled up with Python, PHP, Perl,
Ruby, etc. packages.
Makes sense to try to group them into per-lang folders.
I took the Pythons.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
I just found out that, that the BUILD_VARIANT var
is not set for the host build, so technically this code
would never get used.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
As both LEDE and OpenWrt have STAGING_DIR_HOSTPKG now, we can start to rely
on it. See 73b7f55424 for more information on
STAGING_DIR_HOSTPKG.
STAGING_DIR_HOSTPKG won't actually be changed before the first LEDE release
(it is equivalent to $(STAGING_DIR)/host), so this simple search/replace
cleanup is safe to apply. Doing this cleanup now will be useful for the
Gluon project (an OpenWrt/LEDE based firmware framework) for experimenting
with modifying STAGING_DIR_HOSTPKG before doing this in the LEDE upstream.
Also fixes a typo in the dbus Makefile ("STAGIND_DIR").
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
STAGING_DIR_HOSTPKG is now defined in both OpenWrt and LEDE, so we can
start to rely on it.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Most python packages use the same build rules & vars.
So, adding them in python-package.mk.
Also, preparing for using VARIANTs for python/python3 packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
--sysconfigdir and --sbindir are obtained from --prefix
and --exec-prefix, so no need to have them explicitly
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Allows for more granularity with respect to python-host.mk
and python-package.mk inclusions.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
So that it can be included twice.
python-package.mk include python-host.mk, but at some point
in time python-host.mk is not exported to staging_dir yet.
So, to have in python's Makefile, we need to include it
in the Makefile, and to prevent double inclusion (if
python-host.mk is exported from a previous build), the
include guard is added.
Also, moved the includes after some vars were set.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Currently, the python-host.mk framework relies on HOST_BUILD_PREFIX to
refer to the $(STAGING_DIR)/host directory but using the HOST_BUILD_PREFIX
variable requires the use of include/host-build.mk which in turn includes
python-host.mk, leading to target redefinition errors.
In order to provide a global, uniform way to refer to the host staging
directory, LEDE introduced a new variable STAGING_DIR_HOSTPKG which points
to $(STAGING_DIR)/host for now with the purpose of eventually being able to
relocate that directory in the future.
This commit changes python-host.mk to ...
- stop including include/host-build.mk (revert of #3423)
- replace usages of $(HOST_BUILD_PREFIX) with $(STAGING_DIR_HOSTPKG)
- warn and fallback to $(STAGING_DIR)/host if STAGING_DIR_HOSTPKG is
unavailable
The fallback code will ensure that the python host build infrastructure
continues to work properly on older OpenWrt and LEDE versions until the
STAGING_DIR_HOSTPKG is fully settled in and can be removed some time
in the future.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Also, override all prefix args in the HOST_CONFIGURE_ARGS
so that this works fine on CC/15.05.
There are some changes in core regarding package builds that
require this.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
It seems that this can become an issue.
Found when building python3-setuptools from packages/trunk
in openwrt/15.05.
python3-setuptools is not in packages/for-15.05
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The sets host Python's prefix and exec-prefix to the same value
($(STAGING_DIR)/host for packages, as currently defined in
include/host-build.mk), which avoids the case where pyconfig.h is
not in the same location as Python's other header files (see
https://bugs.python.org/issue896330).
This also removes some cross compilation workarounds
(_python_sysroot/prefix/exec_prefix, disabling byte-compilation,
__PYVENV_LAUNCHER__) that are not necessary when compiling packages
for host.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
AFAIK sysroot is combined with prefix/exec_prefix, so sysroot shouldn't
include "/usr". (cf. the HostPython function in older versions of
python-package.mk)
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
That means basically moving the host Python from $(STAGING_DIR_HOST)
to $(STAGING_DIR_HOST)/usr and making the PYTHONPATH var
as an argument.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Some python packages (e.g. cffi) compile one or more shared libraries
as part of their setup process. When these packages are setup
dependencies of other packages (e.g. cryptography), these packages (and
their shared libraries) will need to be loaded on the host system.
This adds a makefile, similar to python-package.mk, to simplify
installing python packages on the host.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Jeffery To
Alexandru Ardelean
Matthias Schiffer
Jo-Philipp Wich
Yousong Zhou
Felix Fietkau