irqbalance: support reload_config & start later

Removed options UCI parameter. It's not terribly useful. Most of the
parameters can be replaced with procd functionality. procd also demands
processes to run in the foreground.

Removed -fno-builtin. It seems to be a legacy option.

Ran init script through shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

bonding: add missing policies

measurement-kit: update to version 0.10.11

Added support for reload_config

This service does not need to start so early (even
before the netwrok is up). Start it after
the device is mostly up and operational.

Compile-tested on: ipq806x
Runtime-tested on: ipq806x

Signed-off-by: Marc Benoit <marcb62185@gmail.com>

Signed-off-by: Helge Mader <ma@dev.tdt.de>

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>

Signed-off-by: Russell Senior <russell@personaltelco.net>

node-serialport: update to 8.0.7

node-serialport-bindings: update to 8.0.7

node-hid: update to 1.2.0

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

python-requests: update to version 2.23.0

Signed-off-by: Javier Marcet <javier@marcet.info>

Full changelog: https://mosquitto.org/blog/2020/02/version-1-6-9-released/

Nothing of particular relevant to OpenWrt, just general fixes.

Signed-off-by: Karl Palsson <karlp@etactica.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

syncthing: enable/disable via config, lower priority, cleanup

Added the ability to enable/disable via a config file;
the default is enabled for backwards compatibility.

This is an additional service, so running it the
same priority as dnsmasq, etc does not make sense.

Added USE_PROCD=1

"done" starts at "START=95", so this should start earlier

Added STOP=10 to stop syncthing early

Compile-tested on: ipq806x, ipq40xx
Runtime-tested on: ipq806x, ipq40xx

Signed-off-by: Marc Benoit <marcb62185@gmail.com>

libqmi: bump libqmi version

Signed-off-by: Nicholas Smith <nicholas.smith@telcoantennas.com.au>

youtube-dl: update to version 2020.3.1

sqm-scripts: luci-app-sqm: init ucitrack with uci-defaults

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>

Use skb_ensure_writable instead

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>

57394bc Fix build with Linux 5.3
b95d68c Use uint for module parameter type for setup_timeout, remove -ve check

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>

Teredo IPv6 tunneling utility

Signed-off-by: Nikita Vostokov <yawosk@yandex.com>

rtty: update to 7.1.2

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>

To avoid build failure when luci-app-sqm is selected as builtin where
the ipk will be installed on build machine

While at it, switch to using $(MAKE) instead of plain "make"

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

irqbalance: add support for interval and banirq

Added the ability to change sampling interval
and provide a list of IRQ's to ignore
via /etc/config/irqbalance

Signed-off-by: Marc Benoit <marcb62185@gmail.com>

irqbalance: upgrade to 1.6.0

Upgraded from 1.2.0 to 1.6.0 to pick up
all the latest fixes and improvements

irqbalance made glib2 mandatory since 1.3.0, but is
using very little of it. glib2 linked statically
to minimize the impact.

1.2.0 size: 33,619
1.6.0 size: 99,539

~# irqbalance --version
	irqbalance version 1.6.0

~# ldd /usr/sbin/irqbalance
	/lib/ld-musl-armhf.so.1 (0xb6f5f000)
	libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6f43000)
	libc.so => /lib/ld-musl-armhf.so.1 (0xb6f5f000)

~# opkg info irqbalance
	Package: irqbalance
	Version: 1.6.0-6
	Depends: libc
	Status: install user installed
	Architecture: arm_cortex-a7_neon-vfpv4
	Installed-Time: 1582839249

Compile-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Run-tested:     ipq806x/R7800 & ipq40xx/GL-B1300

Signed-off-by: Marc Benoit <marcb62185@gmail.com>

alpine: update to 2.22

Added _GNU_SOURCE define to fix compilation warning.

Added patch to fix uclient-fetch as it does not support -nv.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Fixes issue #11282, this patch was provided by PaulFertser on the #openwrt
IRC.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

stubby: fix init script

protobuf: link against libm under glibc

Switch to standard tarballs. Remove autoreconf as a result.

Simplify NLS and IPv6 handling. Removed options are default.

Remove upstreamed patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

upmpdcli: link against libm under glibc

This update fixes #11452 since LFS detection support was added upstream.
While at, update SPDX license tag to latest standard.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

Fixes compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Removed upstreamed patches. Refresh remaining one.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Fix compilation under glibc.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

The hash was correct but not the source version. No idea how this happened

Signed-off-by: Rosen Penev <rosenp@gmail.com>