iptables 1.8.4 drops support for a combined libiptc, providing split
libip4tc & libip6tc instead. Adjust collectd dependencies in advance of
iptables bump from 1.8.3 to 1.8.4
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
This is intended as a match with standard urngd. They serve same purpose
and urngd starts as first with 00. Starting haveged later can create
issues if you replace urngd with it. The example problem is if
uci-defaults script decides to generate certificate. Haveged can supply
entropy but it is started later and to mitigate this urngd would still
have to be installed. This means that haveget can't serve as replacement
without moving it to match start order of urngd.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
If libacl is built, gnu sed finds it during configuration and enables support
linking in libacl. This results in build failures due to the missing dependency.
Consequently, use CONFIGURE_ARGS to disable acl support.
Reported-by: Rosen Penev rosenp@gmail.com
Signed-off-by: Russell Senior <russell@personaltelco.net>
The previous implementation always succeeded so no scan was performed.
This now fixes that and it correctly scans for BTRFS devices if BTRFS
support is in kernel.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
The original patch[1] this package was based on has been merged into
OpenWrt master, making this package unnecessary.
[1]: https://patchwork.ozlabs.org/patch/1094493/
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Add PKG_BUILD_PARALLEL for faster compilation.
Replace ' ' with TAB for consistency between packages.
Refresh patches and remove outdated ones.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Use PKG_INSTALL for consistency between packages.
Add PKG_BUILD_PARALLEL for faster compilation.
Fix wrong locking path. First discovered here:
https://forum.openwrt.org/t/cannot-setup-dm-crypt/56836
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Added support for reload_config
This service does not need to start so early (even
before the netwrok is up). Start it after
the device is mostly up and operational.
Compile-tested on: ipq806x
Runtime-tested on: ipq806x
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Added the ability to enable/disable via a config file;
the default is enabled for backwards compatibility.
This is an additional service, so running it the
same priority as dnsmasq, etc does not make sense.
Added USE_PROCD=1
"done" starts at "START=95", so this should start earlier
Added STOP=10 to stop syncthing early
Compile-tested on: ipq806x, ipq40xx
Runtime-tested on: ipq806x, ipq40xx
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Added the ability to change sampling interval
and provide a list of IRQ's to ignore
via /etc/config/irqbalance
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Upgraded from 1.2.0 to 1.6.0 to pick up
all the latest fixes and improvements
irqbalance made glib2 mandatory since 1.3.0, but is
using very little of it. glib2 linked statically
to minimize the impact.
1.2.0 size: 33,619
1.6.0 size: 99,539
~# irqbalance --version
irqbalance version 1.6.0
~# ldd /usr/sbin/irqbalance
/lib/ld-musl-armhf.so.1 (0xb6f5f000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6f43000)
libc.so => /lib/ld-musl-armhf.so.1 (0xb6f5f000)
~# opkg info irqbalance
Package: irqbalance
Version: 1.6.0-6
Depends: libc
Status: install user installed
Architecture: arm_cortex-a7_neon-vfpv4
Installed-Time: 1582839249
Compile-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Run-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Currently it only cleans up binaries when executing
Build/InstallDev without deleting .built stamp file.
This leads to wrong information about existence of
built runc binaries and causes error when executing
package/containerd/install twice.
Signed-off-by: Texot Qi <tete1030@gmail.com>
Currently it only cleans up binaries when executing
Build/InstallDev without deleting .built stamp file.
This leads to wrong information about existence of
built runc binaries and causes error when executing
package/runc/install twice.
Signed-off-by: Texot Qi <tete1030@gmail.com>
Infozip (earlier name "zip") has 12 year old source code that
would require work to make the binary actually work.
> root@router1:/# zip
> zip error: Not supported (uzoff_t not same size as zoff_t)
The package was rename from zip to infozip a few weeks ago
due to buildbot's relutance to compile zip in master and 19.07
ever since host zip was added as a build tool.
Reference to #10985 and #11089 as well as
ad8c2d6099
But as the binary does not work, lets remove the package to
avoid confusion for the end-users.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Convert bigclown packages to use pypi.mk and pypi in general instead of
github.
This allows us to remove version replacement as that is already done in
pypi archive.
Updated dependencies to also contain proxy dependencies that are listed
in upstream.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
Fix compilation error due to multiple definition
x86_64-openwrt-linux-musl/bin/ld: lib/libcoreutils.a(strtold.o):(.data+0x0):
multiple definition of `minus_zero'; lib/libcoreutils.a(strtod.o):(.data+0x0):
first defined here
collect2: error: ld returned 1 exit status
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Since the brcm2708 target has been renamed to bcm27xx in openwrt
repo, update the dependency to the target in this package.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Kevin Darbyshire-Bryant
DENG Qingfang
Rosen Penev
Gerard Ryan
Karel Kočí
Russell Senior
Harrie Rooijackers
Javier Marcet
Jeffery To
Marc Benoit
Jianhui Zhao
Texot Qi
Florian Eckert
Hannu Nyman
Karel Kočí
Michael Heimpold
Josef Schlehofer
Michal Hrušecký
Adrian Schmutzler
Shuanglei Tao