openwrt-packages-dist

Commit Graph

Author	SHA1	Message	Date
Florian Eckert	1534c958eb	mwan3: fix sticky chain length Signed-off-by: Florian Eckert <fe@dev.tdt.de> (cherry picked from commit `87c611abf8`)	3 years ago
Florian Eckert	c688ffb025	mwan3: update version to 2.11.0 Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	0b5f09162b	mwan3: dump iptables and ipset command for debugging Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	5a80a5dbfe	mwan3: unify error messages Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	ed2e0b33ed	mwan3: add sleep to release ipset reference It turns out that under high system load, ipsets cannot be deleted. This is because there is still a reference in iptables. A short sleep should give the system time to clean this up. Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	13c2604eb1	mwan3: remove not needed ipset del cmd Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	408458a72f	mwan3: Split ipsets into separate ipv4 and ipv6 sets Nft does not directly support ipsets, nft sets must be used instead. The mwan3 uses ipsets for certain tasks. They can be combinded. So called an ipset of ipsets. This list type is not available in nft. So that mwan3 could be ported to nft in the feature, the ipset handling should be split. So we have for each ipset an iptables rule. Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	502779755a	mwan3: use mwan3_push_update function for mwan3_delete_iface_iptables Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	b5c675392d	mwan3: remove ipset generation from mwan3_set_general_iptables Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	9c2abb19e2	mwan3: use sticky ipset generation mwan3_push_update pattern Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	e985f0dcd1	mwan3: do not create dynamic ipset for IPv6 if not supported Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	fedfbd5004	mwan3: do not add mwan3_custom_v6 set if ipv6 is not available Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	54fad2326e	mwan3: use also ipset restore for connected ipv4 sets Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	a49d0953dc	mwan3: move command definitions to common.sh Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	33e70606c6	mwan3: update iptables dependencies Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	e1f321150d	mwan3: fix mwan3 flush conntrack table call Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Brian J. Murrell	3d824ea288	mwan3: Use shebang in /etc/mwan3.user To allow the script to define what it should be run with. This let's the user use bash if it's available, or python, or perl, etc. Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca> Update PKG_VERSION to 2.10.11 Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	44d79147ea	mwan3: bump PKG_VERSION to 2.10.11 Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	619b721c2f	mwan3: add troublshoot command from LuCI Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Florian Eckert	a9dac71e3d	mwan3: cleanup help output Signed-off-by: Florian Eckert <fe@dev.tdt.de>	3 years ago
Daniel Golle	cb02b42007	mwan3: use default routes from additional tables Until now the additional tables listed in gobal 'rt_table_lookup' were not considered for interfaces. In order to be able to also use interface-defined routes from tables other than main, consider also tables listed in 'rt_table_lookup'. Update version to 2.10.10 as requested by maintainer. Signed-off-by: Daniel Golle <daniel@makrotopia.org>	3 years ago
Florian Eckert	f1da872cd4	mwan3: update ubus status for not tracked interfaces Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	cbc5f0916c	mwna3: fix whitespace Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Aaron Goodman	b7ea19bc96	mwan3: allow interfaces with no tracking IPs In the procd refactor, support for interfaces with no tracking IPs was inadvertentiy removed. This commit restores the previous behavior Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Florian Eckert	5348732b98	mwan3: add connecting and disconnecting event to mwan3track If the interface goes into failure state (is disconnecting) then with this change one hotplug.d event is generated. The same is true for the recovery state (is connecting), when the interface comes back from a failure state. In both cases, a hotplug.d event for the iface is triggered. Once with the $ACTION=disconnecting and once for the $ACTION=connecting. Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	7cfb282432	mwan3: disable DNS lookups for ping checks By default, ping does a reverse DNS of the IP that you are pinging. When you have a network issue (such as when a link has just gone down and you haven't yet marked it down), this lookup can cause failures on tests for links that are still good. This option only works for iputils ping. For busybox the option is not evaluated, but it is accepted without throwing an error. Fixes: #14968 Fixes: #14924 Signed-off-by: Florian Eckert <fe@dev.tdt.de> Suggested-by: David Lang <david@lang.hm>	4 years ago
Aaron Goodman	267b65ad9f	mwan3: fix regression in ipv6 routing tables Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Florian Eckert	06ce040cbe	mwan3: update PKG_VERSION Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	2f58865a01	mwan3: fix string check for active_tbls Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	0dbbc58cbc	mwan3: fix tab Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	6133d5a0e9	mwan3: remove unused mwan3_unlock function call Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	55051e6c7b	mwan3: reinstall missing mwan3.user file Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	c085f2648f	mwan3: fix MWAN3_STARTUP caller Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	8f697b45c8	mwan3: fix whitspace Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Florian Eckert	8d41e5477f	mwan3: fix logger tag in mwan3 init Signed-off-by: Florian Eckert <fe@dev.tdt.de>	4 years ago
Aaron Goodman	85dbb48201	mwan3: update version Signed-off-by: Florian Eckert <fe@dev.tdt.de> - Changed version string Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	c6fce89bf7	mwan3: add more error logging to routing functions Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	24e1504b0b	mwan3: improve route flushing on mwan3 stop only attempt to flush routes for the relevant family Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	21ac1b2c3e	mwan3: fix race condition in route loading Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	5691ff247f	mwan3: fix linkdown routes not being added Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	8abd5781b9	mwan3: version bump to 2.10.3-3 Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	8cc38f933c	mwan3: add maintainer add @aaronjg as maintener as per conversation with @feckert Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	1bfb1a66cd	mwan3: support latest iputils ping iputils upstream changed build params with version s20200821 Latest OpenWRT iputils ping now appears to report the openwrt version tag, rather than iputils date tag This commit sends a test ping to localhost to evaluate the capabilities of iputils ping. Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	f014a7f542	mwan3: don't trigger rpcd install hooks if rpcd not installed Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	a5f3e6bb6b	mwan3: don't call rpcd on 'mwan3 interfaces' Allow `mwan3 interfaces` to get uptime via an internal function and thus remove the dependency on rpcd for `mwan3 interface` calls. Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
James White	8608afa75f	mwan3: Update documentation information for mwan3.user file Signed-off-by: James White <james@jmwhite.co.uk>	4 years ago
Aaron Goodman	321a52862a	mwan3: cleanup indenting in rpcd interface status Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	e405b261d6	mwan3: don't include output from TRACK_OUTUPUT in status call Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	ebfb7fb9d2	mwan3: report an error code on status failure Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago
Aaron Goodman	c336e5d682	mwan3: remove unused device lookup in status check Signed-off-by: Aaron Goodman <aaronjg@stanford.edu>	4 years ago

1 2 3 4 5 ...

306 Commits (lilik-openwrt-22.03)