Browse Source

Merge pull request #13761 from rg4github/banip_logging

banip: Added packet logging feature. Resolved shellcheck warnings.
lilik-openwrt-22.03
Dirk Brenken 4 years ago
committed by GitHub
parent
commit
ce27e722ec
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 193 additions and 99 deletions
  1. +1
    -1
      net/banip/Makefile
  2. +52
    -31
      net/banip/files/README.md
  3. +2
    -0
      net/banip/files/banip.conf
  4. +138
    -67
      net/banip/files/banip.sh

+ 1
- 1
net/banip/Makefile View File

@ -6,7 +6,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=banip
PKG_VERSION:=0.3.11
PKG_VERSION:=0.3.12
PKG_RELEASE:=1
PKG_LICENSE:=GPL-3.0-or-later
PKG_MAINTAINER:=Dirk Brenken <dev@brenken.org>


+ 52
- 31
net/banip/files/README.md View File

@ -27,6 +27,7 @@ IP address blocking is commonly used to protect against brute force attacks, pre
* output comprehensive runtime information via LuCI or via 'status' init command
* strong LuCI support
* optional: add new banIP sources on your own
* optional: log banned inbound and/or outbound IP to syslog.
## Prerequisites
* [OpenWrt](https://openwrt.org), tested with the stable release series (19.07) and with the latest snapshot
@ -45,45 +46,65 @@ IP address blocking is commonly used to protect against brute force attacks, pre
## banIP config options
* usually the pre-configured banIP setup works quite well and no manual overrides are needed
* the following options apply to the 'global' config section:
* ban\_enabled => main switch to enable/disable banIP service (bool/default: '0', disabled)
* ban\_automatic => determine the L2/L3 WAN network device automatically (bool/default: '1', enabled)
* ban\_iface => space separated list of WAN network interface(s)/device(s) used by banIP (default: not set, automatically detected)
* ban\_realtime => a small log/banIP background monitor to block SSH/LuCI brute force attacks in realtime (bool/default: 'false', disabled)
* ban\_enabled => main switch to enable/disable banIP service (bool/default: '0', disabled)
* ban\_automatic => determine the L2/L3 WAN network device automatically (bool/default: '1', enabled)
* ban\_iface => space separated list of WAN network interface(s)/device(s) used by banIP (default: not set, automatically detected)
* ban\_realtime => a small log/banIP background monitor to block SSH/LuCI brute force attacks in realtime (bool/default: 'false', disabled)
* ban\_target\_src => action to perform when banning inbound IPv4 packets ('DROP'/'REJECT', default: 'DROP')
* ban\_target\_src\_6 => action to perform when banning inbound IPv6 packets ('DROP'/'REJECT', default: 'DROP')
* ban\_target\_dst => action to perform when banning outbound IPv4 packets ('DROP'/'REJECT', default: 'REJECT')
* ban\_target\_dst\_6 => action to perform when banning outbound IPv6 packets ('DROP'/'REJECT', default: 'REJECT')
* ban\_log\_src => switch to enable/disable logging of banned inbound IPv4 packets (bool/default: '0', disabled)
* ban\_log\_dst => switch to enable/disable logging of banned outbound IPv4 packets (bool/default: '0', disabled)
* the following options apply to the 'extra' config section:
* ban\_debug => enable/disable banIP debug output (bool/default: '0', disabled)
* ban\_nice => set the nice level of the banIP process and all sub-processes (int/default: '0', standard priority)
* ban\_triggerdelay => additional trigger delay in seconds before banIP processing begins (int/default: '2')
* ban\_backupdir => target directory for banIP backups (default: '/tmp')
* ban\_sshdaemon => select the SSH daemon for logfile parsing, 'dropbear' or 'sshd' (default: 'dropbear')
* ban\_starttype => select the used start type during boot, 'start', 'refresh' or 'reload' (default: 'start')
* ban\_maxqueue => size of the download queue to handle downloads & IPSet processing in parallel (int/default: '4')
* ban\_fetchutil => name of the used download utility: 'uclient-fetch', 'wget', 'curl', 'aria2c' (default: not set, automatically detected)
* ban\_fetchparm => special config options for the download utility (default: not set)
* ban\_autoblacklist => store auto-addons temporary in ipset and permanently in local blacklist as well (bool/default: '1', enabled)
* ban\_autowhitelist => store auto-addons temporary in ipset and permanently in local whitelist as well (bool/default: '1', enabled)
* ban\_debug => enable/disable banIP debug output (bool/default: '0', disabled)
* ban\_nice => set the nice level of the banIP process and all sub-processes (int/default: '0', standard priority)
* ban\_triggerdelay => additional trigger delay in seconds before banIP processing begins (int/default: '2')
* ban\_backupdir => target directory for banIP backups (default: '/tmp')
* ban\_sshdaemon => select the SSH daemon for logfile parsing, 'dropbear' or 'sshd' (default: 'dropbear')
* ban\_starttype => select the used start type during boot, 'start', 'refresh' or 'reload' (default: 'start')
* ban\_maxqueue => size of the download queue to handle downloads & IPSet processing in parallel (int/default: '4')
* ban\_fetchutil => name of the used download utility: 'uclient-fetch', 'wget', 'curl', 'aria2c' (default: not set, automatically detected)
* ban\_fetchparm => special config options for the download utility (default: not set)
* ban\_autoblacklist => store auto-addons temporary in ipset and permanently in local blacklist as well (bool/default: '1', enabled)
* ban\_autowhitelist => store auto-addons temporary in ipset and permanently in local whitelist as well (bool/default: '1', enabled)
## Logging of banned packets
* by setting ban\_log\_src=1 / ban\_log\_dst=1 in the config options, banIP will log banned inbound / outbound packets to syslog.
* example of a logged inbound (dst) and outbound (src) packet:
<pre><code>
Oct 2 12:49:14 gateway kernel: [434134.855130] REJECT(dst banIP) IN=br-lan OUT=br-wan MAC=xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx SRC=x.x.x.x DST=x.x.x.x LEN=100 TOS=0x00 PREC=0x00 TTL=63 ID=7938 PROTO=UDP SPT=16393 DPT=16393 LEN=80
Oct 3 14:11:13 gateway kernel: [11290.429712] DROP(src banIP) IN=br-wan OUT= MAC=xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx SRC=x.x.x.x DST=x.x.x.x LEN=40 TOS=0x00 PREC=0x00 TTL=235 ID=63275 PROTO=TCP SPT=48246 DPT=37860 WINDOW=1024 RES=0x00 SYN URGP=0
</code></pre>
* to change the default logging behavior, the following options can be added to the 'global' config section:
* ban\_log\_src\_opts => IPv4 iptables LOG options for banned inbound packets (default: '-m limit --limit 10/sec')
* ban\_log\_src\_opts\_6 => IPv6 iptables LOG options for banned inbound packets (default: '-m limit --limit 10/sec')
* ban\_log\_src\_prefix (default: '<ban\_target\_src>(src banIP) ', typically 'DROP(src banIP) ')
* ban\_log\_src\_prefix\_6 (default: '<ban\_target\_src\_6>(src banIP) ', typically 'DROP('src banIP)' )
* ban\_log\_dst\_opts => IPv4 iptables LOG options for banned outbound packets (default: '-m limit --limit 10/sec')
* ban\_log\_dst\_opts\_6 => IPv6 iptables LOG options for banned outbound packets (default: '-m limit --limit 10/sec')
* ban\_log\_dst\_prefix (default: '<ban\_target\_dst>(dst banIP) ', typically 'REJECT(dst banIP) ')
* ban\_log\_dst\_prefix\_6 (default: '<ban\_target\_dst\_6>(dst banIP) ', typically 'REJECT('dst banIP)' )
## Examples
**receive banIP runtime information:**
<pre><code>
/etc/init.d/banip status
::: banIP runtime information
+ status : enabled
+ version : 0.3.0
+ util_info : /usr/bin/aria2c, true
+ ipset_info : 10 IPSets with overall 106729 IPs/Prefixes
+ backup_dir : /tmp
+ last_run : 03.10.2019 19:15:25
+ system : UBNT-ERX, OpenWrt SNAPSHOT r11102-ced4c0e635
</code></pre>
# /etc/init.d/banip status
::: banIP runtime information
+ status : enabled
+ version : 0.3.0
+ util_info : /usr/bin/aria2c, true
+ ipset_info : 10 IPSets with overall 106729 IPs/Prefixes
+ backup_dir : /tmp
+ last_run : 03.10.2019 19:15:25
+ system : UBNT-ERX, OpenWrt SNAPSHOT r11102-ced4c0e635
**cronjob for a regular IPSet blocklist update (/etc/crontabs/root):**
<pre><code>
0 06 * * * /etc/init.d/banip reload
</code></pre>
# Every day at 06:00, update the IPSets of banIP
00 06 * * * /etc/init.d/banip reload
## Support
Please join the banIP discussion in this [forum thread](https://forum.openwrt.org/t/banip-support-thread/16985) or contact me by mail <dev@brenken.org>


+ 2
- 0
net/banip/files/banip.conf View File

@ -4,6 +4,8 @@ config banip 'global'
option ban_basever '0.3'
option ban_automatic '1'
option ban_realtime 'false'
option ban_log_src '0'
option ban_log_dst '0'
config banip 'extra'
option ban_debug '0'


+ 138
- 67
net/banip/files/banip.sh View File

@ -7,13 +7,13 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# (s)hellcheck exceptions
# shellcheck disable=1091 disable=2039 disable=2143 disable=2181 disable=2188
# shellcheck disable=1091,2039,2086,2140,2143,2181,2188
# set initial defaults
#
LC_ALL=C
PATH="/usr/sbin:/usr/bin:/sbin:/bin"
ban_ver="0.3.11"
ban_ver="0.3.12"
ban_basever=""
ban_enabled=0
ban_automatic="1"
@ -42,6 +42,8 @@ ban_logservice="/etc/banip/banip.service"
ban_sshdaemon=""
ban_setcnt=0
ban_cnt=0
ban_log_src=0
ban_log_dst=0
# load environment
#
@ -97,6 +99,28 @@ f_envload()
config_load banip
config_foreach parse_config source
# setup logging
#
ban_log_chain_src="${ban_log_chain_src:-"${ban_chain}_log_src"}"
if [ "${ban_log_src}" -eq 1 ]
then
log_target_src="${ban_target_src:-"DROP"}"
ban_target_src="${ban_log_chain_src}"
log_target_src_6="${ban_target_src_6:-"DROP"}"
ban_target_src_6="${ban_log_chain_src}"
fi
ban_log_chain_dst="${ban_log_chain_dst:-"${ban_chain}_log_dst"}"
if [ "${ban_log_dst}" -eq 1 ]
then
log_target_dst="${ban_target_dst:-"REJECT"}"
ban_target_dst="${ban_log_chain_dst}"
log_target_dst_6="${ban_target_dst_6:-"REJECT"}"
ban_target_dst_6="${ban_log_chain_dst}"
fi
# log daemon check
#
if [ "$(/etc/init.d/log running; printf "%u" "${?}")" -eq 1 ]
@ -259,7 +283,7 @@ f_envcheck()
fi
case "${util}" in
"aria2c")
ban_fetchparm="${ban_fetchparm:-"--timeout=20 --allow-overwrite=true --auto-file-renaming=false --check-certificate=true --dir=" " -o"}"
ban_fetchparm="${ban_fetchparm:-"--timeout=20 --allow-overwrite=true --auto-file-renaming=false --check-certificate=true --dir=/ -o"}"
;;
"curl")
ban_fetchparm="${ban_fetchparm:-"--connect-timeout 20 -o"}"
@ -392,15 +416,13 @@ f_iptadd()
then
if [ "${src_ruletype}" != "dst" ]
then
if [ "${src_name##*_}" = "6" ]
f_iptrule "-I" "${wan_input} -j ${ban_chain}"
f_iptrule "-I" "${wan_forward} -j ${ban_chain}"
if [ "${src_name##*_}" != "6" ]
then
# dummy, special IPv6 rules
/bin/true
else
f_iptrule "-I" "${wan_input} -p udp --dport 67:68 --sport 67:68 -j RETURN"
# special IPv4 rules
f_iptrule "-A" "${ban_chain} -p udp --dport 67:68 --sport 67:68 -j RETURN"
fi
f_iptrule "-A" "${wan_input} -j ${ban_chain}"
f_iptrule "-A" "${wan_forward} -j ${ban_chain}"
for dev in ${ban_dev}
do
f_iptrule "${action:-"-A"}" "${ban_chain} -i ${dev} -m conntrack --ctstate NEW -m set --match-set ${src_name} src -j ${target_src}"
@ -408,15 +430,13 @@ f_iptadd()
fi
if [ "${src_ruletype}" != "src" ]
then
if [ "${src_name##*_}" = "6" ]
f_iptrule "-I" "${lan_input} -j ${ban_chain}"
f_iptrule "-I" "${lan_forward} -j ${ban_chain}"
if [ "${src_name##*_}" != "6" ]
then
# dummy, special IPv6 rules
/bin/true
else
f_iptrule "-I" "${lan_input} -p udp --dport 67:68 --sport 67:68 -j RETURN"
# special IPv4 rules
f_iptrule "-A" "${ban_chain} -p udp --dport 67:68 --sport 67:68 -j RETURN"
fi
f_iptrule "-A" "${lan_input} -j ${ban_chain}"
f_iptrule "-A" "${lan_forward} -j ${ban_chain}"
for dev in ${ban_dev}
do
f_iptrule "${action:-"-A"}" "${ban_chain} -o ${dev} -m conntrack --ctstate NEW -m set --match-set ${src_name} dst -j ${target_dst}"
@ -434,7 +454,7 @@ f_iptadd()
#
f_ipset()
{
local out_rc source action ruleset ruleset_6 rule cnt=0 cnt_ip=0 cnt_cidr=0 timeout="-w 5" mode="${1}" in_rc="${src_rc:-0}"
local out_rc source action ruleset rule cnt=0 cnt_ip=0 cnt_cidr=0 timeout="-w 5" mode="${1}" in_rc="${src_rc:-0}"
if [ "${src_name%_6*}" = "whitelist" ]
then
@ -471,34 +491,81 @@ f_ipset()
return "${out_rc}"
;;
"initial")
if [ -x "${ban_ipt}" ] && [ -z "$("${ban_ipt}" "${timeout}" -nL "${ban_chain}" 2>/dev/null)" ]
then
"${ban_ipt}" "${timeout}" -N "${ban_chain}" 2>/dev/null
out_rc="${?}"
elif [ -x "${ban_ipt}" ]
then
src_name="ruleset"
ruleset="${ban_wan_input_chain:-"input_wan_rule"} ${ban_wan_forward_chain:-"forwarding_wan_rule"} ${ban_lan_input_chain:-"input_lan_rule"} ${ban_lan_forward_chain:-"forwarding_lan_rule"}"
for rule in ${ruleset}
do
f_iptrule "-D" "${rule} -j ${ban_chain}"
done
fi
if [ -x "${ban_ipt6}" ] && [ -z "$("${ban_ipt6}" "${timeout}" -nL "${ban_chain}" 2>/dev/null)" ]
then
"${ban_ipt6}" "${timeout}" -N "${ban_chain}" 2>/dev/null
out_rc="${?}"
elif [ -x "${ban_ipt6}" ]
then
src_name="ruleset_6"
ruleset_6="${ban_wan_input_chain_6:-"input_wan_rule"} ${ban_wan_forward_chain_6:-"forwarding_wan_rule"} ${ban_lan_input_chain_6:-"input_lan_rule"} ${ban_lan_forward_chain_6:-"forwarding_lan_rule"}"
for rule in ${ruleset_6}
do
f_iptrule "-D" "${rule} -j ${ban_chain}"
done
fi
local ipt log_src_target log_src_opts log_src_prefix log_dst_target log_dst_opts log_dst_prefix
for src_name in "ruleset" "ruleset_6"
do
if [ "${src_name##*_}" = "6" ]
then
ipt="${ban_ipt6}"
ruleset="${ban_wan_input_chain_6:-"input_wan_rule"} ${ban_wan_forward_chain_6:-"forwarding_wan_rule"} ${ban_lan_input_chain_6:-"input_lan_rule"} ${ban_lan_forward_chain_6:-"forwarding_lan_rule"}"
log_src_target="${log_target_src_6}"
log_src_opts="${ban_log_src_opts_6:-"-m limit --limit 10/sec"}"
log_src_prefix="${ban_log_src_prefix_6:-"${log_target_src_6}(src banIP) "}"
log_dst_target="${log_target_dst_6}"
log_dst_opts="${ban_log_dst_opts_6:-"-m limit --limit 10/sec"}"
log_dst_prefix="${ban_log_dst_prefix_6:-"${log_target_dst_6}(dst banIP) "}"
else
ipt="${ban_ipt}"
ruleset="${ban_wan_input_chain:-"input_wan_rule"} ${ban_wan_forward_chain:-"forwarding_wan_rule"} ${ban_lan_input_chain:-"input_lan_rule"} ${ban_lan_forward_chain:-"forwarding_lan_rule"}"
log_src_target="${log_target_src}"
log_src_opts="${ban_log_src_opts:-"-m limit --limit 10/sec"}"
log_src_prefix="${ban_log_src_prefix:-"${log_target_src}(src banIP) "}"
log_dst_target="${log_target_dst}"
log_dst_opts="${ban_log_dst_opts:-"-m limit --limit 10/sec"}"
log_dst_prefix="${ban_log_dst_prefix:-"${log_target_dst}(dst banIP) "}"
fi
if [ -x "${ipt}" ]
then
if [ -z "$("${ipt}" "${timeout}" -nL "${ban_chain}" 2>/dev/null)" ]
then
"${ipt}" "${timeout}" -N "${ban_chain}" 2>/dev/null
out_rc="${?}"
else
out_rc=0
for rule in ${ruleset}
do
f_iptrule "-D" "${rule} -j ${ban_chain}"
done
fi
f_log "debug" "f_ipset ::: name: -, mode: ${mode:-"-"}, chain: ${ban_chain:-"-"}, $src_name: ${ruleset:-"-"}, out_rc: ${out_rc}"
if [ "${ban_log_src}" -eq 1 ] && [ "${out_rc}" -eq 0 ]
then
if [ -z "$("${ipt}" "${timeout}" -nL "${ban_log_chain_src}" 2>/dev/null)" ]
then
"${ipt}" "${timeout}" -N "${ban_log_chain_src}" 2>/dev/null
out_rc="${?}"
if [ "${out_rc}" -eq 0 ]
then
"${ipt}" "${timeout}" -A "${ban_log_chain_src}" -j LOG ${log_src_opts} --log-prefix "${log_src_prefix}" && \
"${ipt}" "${timeout}" -A "${ban_log_chain_src}" -j "${log_src_target}"
out_rc="${?}"
fi
fi
f_log "debug" "f_ipset ::: name: -, mode: ${mode:-"-"}, chain: ${ban_log_chain_src:-"-"}, out_rc: ${out_rc}"
fi
if [ "${ban_log_dst}" -eq 1 ] && [ "${out_rc}" -eq 0 ]
then
if [ -z "$("${ipt}" "${timeout}" -nL "${ban_log_chain_dst}" 2>/dev/null)" ]
then
"${ipt}" "${timeout}" -N "${ban_log_chain_dst}" 2>/dev/null
out_rc="${?}"
if [ "${out_rc}" -eq 0 ]
then
"${ipt}" "${timeout}" -A "${ban_log_chain_dst}" -j LOG ${log_dst_opts} --log-prefix "${log_dst_prefix}" && \
"${ipt}" "${timeout}" -A "${ban_log_chain_dst}" -j "${log_dst_target}"
out_rc="${?}"
fi
fi
f_log "debug" "f_ipset ::: name: -, mode: ${mode:-"-"}, chain: ${ban_log_chain_dst:-"-"}, out_rc: ${out_rc}"
fi
fi
done
out_rc="${out_rc:-"${in_rc}"}"
f_log "debug" "f_ipset ::: name: -, mode: ${mode:-"-"}, chain: ${ban_chain:-"-"}, ruleset: ${ruleset:-"-"}, ruleset_6: ${ruleset_6:-"-"}, out_rc: ${out_rc}"
f_log "debug" "f_ipset ::: name: -, mode: ${mode:-"-"}, out_rc: ${out_rc}"
return "${out_rc}"
;;
"create")
@ -562,20 +629,23 @@ f_ipset()
f_log "debug" "f_ipset ::: name: ${src_name:-"-"}, mode: ${mode:-"-"}"
;;
"destroy")
if [ -x "${ban_ipt}" ] && [ -x "${ban_ipt_save}" ] && [ -x "${ban_ipt_restore}" ] && \
[ -n "$("${ban_ipt}" "${timeout}" -nL "${ban_chain}" 2>/dev/null)" ]
then
"${ban_ipt_save}" | grep -v -- "-j ${ban_chain}" | "${ban_ipt_restore}"
"${ban_ipt}" "${timeout}" -F "${ban_chain}" 2>/dev/null
"${ban_ipt}" "${timeout}" -X "${ban_chain}" 2>/dev/null
fi
if [ -x "${ban_ipt6}" ] && [ -x "${ban_ipt6_save}" ] && [ -x "${ban_ipt6_restore}" ] && \
[ -n "$("${ban_ipt6}" "${timeout}" -nL "${ban_chain}" 2>/dev/null)" ]
then
"${ban_ipt6_save}" | grep -v -- "-j ${ban_chain}" | "${ban_ipt6_restore}"
"${ban_ipt6}" "${timeout}" -F "${ban_chain}" 2>/dev/null
"${ban_ipt6}" "${timeout}" -X "${ban_chain}" 2>/dev/null
fi
for chain in ${ban_log_chain_src} ${ban_log_chain_dst} ${ban_chain}
do
if [ -x "${ban_ipt}" ] && [ -x "${ban_ipt_save}" ] && [ -x "${ban_ipt_restore}" ] && \
[ -n "$("${ban_ipt}" "${timeout}" -nL "${chain}" 2>/dev/null)" ]
then
"${ban_ipt_save}" | grep -v -- "-j ${chain}" | "${ban_ipt_restore}"
"${ban_ipt}" "${timeout}" -F "${chain}" 2>/dev/null
"${ban_ipt}" "${timeout}" -X "${chain}" 2>/dev/null
fi
if [ -x "${ban_ipt6}" ] && [ -x "${ban_ipt6_save}" ] && [ -x "${ban_ipt6_restore}" ] && \
[ -n "$("${ban_ipt6}" "${timeout}" -nL "${chain}" 2>/dev/null)" ]
then
"${ban_ipt6_save}" | grep -v -- "-j ${chain}" | "${ban_ipt6_restore}"
"${ban_ipt6}" "${timeout}" -F "${chain}" 2>/dev/null
"${ban_ipt6}" "${timeout}" -X "${chain}" 2>/dev/null
fi
done
for source in ${ban_sources}
do
if [ -x "${ban_ipset}" ] && [ -n "$("${ban_ipset}" -q -n list "${source}")" ]
@ -895,14 +965,15 @@ f_main()
if [ -z "$(ls "${ban_tmpfile}".*.err 2>/dev/null)" ]
then
for cnt in $(cat "${ban_tmpfile}".*.cnt 2>/dev/null)
do
ban_cnt="$((ban_cnt+cnt))"
done
if [ "${ban_cnt}" -gt 0 ]
then
ban_setcnt="$(ls "${ban_tmpfile}".*.cnt 2>/dev/null | wc -l)"
fi
for cnt_file in "${ban_tmpfile}".*.cnt
do
if [ -f "$cnt_file" ]
then
read -r cnt < "$cnt_file"
ban_cnt="$((ban_cnt+cnt))"
ban_setcnt="$((ban_setcnt+1))"
fi
done
f_log "info" "${ban_setcnt} IPSets with overall ${ban_cnt} IPs/Prefixes loaded successfully (${ban_sysver})"
f_bgserv "start"
f_jsnup


Loading…
Cancel
Save