Browse Source

xl2tpd: README.md: add docs on uci options

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
lilik-openwrt-22.03
Yousong Zhou 7 years ago
parent
commit
c4fa84cc21
2 changed files with 45 additions and 23 deletions
  1. +0
    -23
      net/xl2tpd/README
  2. +45
    -0
      net/xl2tpd/README.md

+ 0
- 23
net/xl2tpd/README View File

@ -1,23 +0,0 @@
OpenWRT Package for xl2tpd
xl2tpd is a development from the original l2tpd package originally written by
Mark Spencer, subsequently forked by Scott Balmos and David Stipp, inherited
by Jeff McAdams, modified substantially by Jacco de Leeuw and then forked
again by Xelerance (after it was abandoned by l2tpd.org).
Rationale for inclusion in OpenWRT:
l2tpd has some serious alignment problems on RISC platforms. It also runs
purely in userspace.
Some of the features added in this fork include:
1. IPSec SA reference tracking inconjunction with openswan's IPSec transport
mode, which adds support for multiple clients behind the same NAT router
and multiple clients on the same internal IP behind different NAT routers.
2. Support for the pppol2tp kernel mode L2TP.
3. Alignment and endian problems resolved.
hcg

+ 45
- 0
net/xl2tpd/README.md View File

@ -0,0 +1,45 @@
# OpenWrt Package for xl2tpd
xl2tpd is a development from the original l2tpd package originally written by
Mark Spencer, subsequently forked by Scott Balmos and David Stipp, inherited
by Jeff McAdams, modified substantially by Jacco de Leeuw and then forked
again by Xelerance (after it was abandoned by l2tpd.org).
## Rationale for inclusion in OpenWrt
l2tpd has some serious alignment problems on RISC platforms. It also runs
purely in userspace.
Some of the features added in this fork include:
1. IPSec SA reference tracking inconjunction with openswan's IPSec transport
mode, which adds support for multiple clients behind the same NAT router
and multiple clients on the same internal IP behind different NAT routers.
2. Support for the pppol2tp kernel mode L2TP.
3. Alignment and endian problems resolved.
hcg
## UCI options
`server` takes the form `host[:port]` with port defaults to `1701`. It
specifies the l2tp server's address.
`checkup_interval` tells netifd to check after that many seconds since last
setup attempt to see if the interface is up. If not it should issue another
teardown/setup round to retry the negotiation. This option defaults to 0 and
netifd will not do the check and retry.
The following are generic ppp options and should have the same format and
semantics as with other ppp-related protocols. See
[uci/network#protocol_ppp](https://wiki.openwrt.org/doc/uci/network#protocol_ppp_ppp_over_modem)
for details.
username
password
keepalive
ipv6
mtu
pppd_options

Loading…
Cancel
Save