Browse Source

adblock: update 1.4.7

* add a query function to search the active blocklists for a specific
domain (/etc/init.d/adblock query <DOMAIN>)
* fix bug in ap mode/uhttpd port detection
* check general firewall and dnsmasq package dependencies and remove
redundant checks in ap mode

Signed-off-by: Dirk Brenken <dev@brenken.org>
lilik-openwrt-22.03
Dirk Brenken 8 years ago
parent
commit
b31f99823c
5 changed files with 37 additions and 41 deletions
  1. +1
    -1
      net/adblock/Makefile
  2. +3
    -12
      net/adblock/files/README.md
  3. +17
    -25
      net/adblock/files/adblock-helper.sh
  4. +1
    -1
      net/adblock/files/adblock-update.sh
  5. +15
    -2
      net/adblock/files/adblock.init

+ 1
- 1
net/adblock/Makefile View File

@ -7,7 +7,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=adblock
PKG_VERSION:=1.4.6
PKG_VERSION:=1.4.7
PKG_RELEASE:=1
PKG_LICENSE:=GPL-3.0+
PKG_MAINTAINER:=Dirk Brenken <dev@brenken.org>


+ 3
- 12
net/adblock/files/README.md View File

@ -48,7 +48,7 @@ A lot of people already use adblocker plugins within their desktop browsers, but
* [zeus tracker](https://zeustracker.abuse.ch)
* => daily updates, approx. 440 entries
* zero-conf like automatic installation & setup, usually no manual changes needed (i.e. ip address, network devices etc.)
* supports a wide range of router modes (incl. AP mode), as long as the firewall and the DNS server are enabled & in use
* supports a wide range of router modes (incl. AP mode), as long as firewall and dnsmasq are installed and in use
* full IPv4 and IPv6 support
* each blocklist source will be updated and processed separately
* timestamp check to download and process only updated adblock list sources
@ -103,10 +103,11 @@ A lot of people already use adblocker plugins within their desktop browsers, but
* **list updates:** for a scheduled call of the adblock service add an appropriate crontab entry (see example below)
* **hotplug fine tuning:** to restrict hotplug support to a certain wan interface or to disable it at all, you can set 'adb\_hotplugif' to an existing interface like 'wan' or to a non-existing 'dummy' interface
* **new list sources:** you could add new blocklist sources on your own via uci config, all you need is a source url and an awk one-liner (see example below)
* **AP mode:** in 'AP mode' adblock uses automatically the local router ip as nullip address. To make sure that your LuCI interface will be still accessible, you have to change the local uhttpd instance to ports <> 80/443 (see example below)
* **AP mode:** in 'AP mode' adblock uses automatically the local router ip as nullip address. To make sure that your LuCI interface will be still accessible, you have to change the local uhttpd instance to ports <> 80/443 (see example below), also make sure that firewall and dnsmasq are installed and running
* **restricted mode:** to disable flash writes with adblock status information to the adblock config file (used by LuCI frontend), please set 'adb\_restricted' to '1'
* **adblock toggle:** to quickly switch adblocking 'on' or 'off', simply use _/etc/init.d/adblock toggle_
* **adblock statistics:** to update only the adblock statistics (without updating the block lists as well), please run _/etc/init.d/adblock stats_
* **adblock query <DOMAIN>:** to query the active blocklists for a specific domain, please run _/etc/init.d/adblock query <DOMAIN>_
* **configuration update:** to update an outdated adblock config file with the current default version, please run _/etc/init.d/adblock cfgup_, make your individual changes and start the adblock service again
* **debugging:** for script debugging please set the 'adb\_debug' variable in the header of _/etc/init.d/adblock_ to '1'
* **disable active dns probing in windows:** to prevent a possible yellow exclamation mark on your internet connection icon (which wrongly means connected, but no internet), please change the following registry key/value from "1" to "0" _HKLM\SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet\EnableActiveProbing_
@ -179,16 +180,6 @@ config uhttpd 'main'
list listen_https '0.0.0.0:445'
</code></pre>
**example grep for blocked (sub-)domains in adblock source files:**
<pre><code>
grep "google-analytics.com" "/tmp/dnsmasq.d/adb_list"*
This will output all matches with corresponding source files:
/tmp/dnsmasq.d/adb_list.winhelp:address=/ssl.google-analytics.com/198.18.0.1
/tmp/dnsmasq.d/adb_list.winhelp:address=/www.google-analytics.com/198.18.0.1
/tmp/dnsmasq.d/adb_list.yoyo:address=/google-analytics.com/198.18.0.1
</code></pre>
**example to find blocked domains on certain sites for whitelisting:**
<pre><code>
1. the easy way ...


+ 17
- 25
net/adblock/files/adblock-helper.sh View File

@ -169,22 +169,12 @@ f_envcheck()
then
adb_nullipv4="${adb_ipv4}"
adb_nullipv6="${adb_ipv6}"
if [ -n "$(${adb_uci} -q get uhttpd.main.listen_http | grep -Fo "80")" ] ||
[ -n "$(${adb_uci} -q get uhttpd.main.listen_https | grep -Fo "443")" ]
if [ -n "$(${adb_uci} -q get uhttpd.main.listen_http | grep -o ":80$")" ] ||
[ -n "$(${adb_uci} -q get uhttpd.main.listen_https | grep -o ":443$")" ]
then
rc=-1
f_log "AP mode detected, please set local LuCI instance to ports <> 80/443"
f_exit
elif [ ! -f "/etc/init.d/dnsmasq" ]
then
rc=-1
f_log "please enable the local dnsmasq instance to use adblock"
f_exit
elif [ ! -f "/var/run/fw3.state" ]
then
rc=-1
f_log "please enable the local firewall to use adblock"
f_exit
else
apmode_ok="true"
fi
@ -204,23 +194,25 @@ f_envcheck()
# check general package dependencies
#
f_depend "busybox"
f_depend "uci"
f_depend "uhttpd"
f_depend "iptables"
f_depend "kmod-ipt-nat"
f_depend "busybox -"
f_depend "uci -"
f_depend "uhttpd -"
f_depend "iptables -"
f_depend "kmod-ipt-nat -"
f_depend "firewall -"
f_depend "dnsmasq*"
# check ipv6 related package dependencies
#
if [ -n "${adb_wanif6}" ]
then
f_depend "ip6tables" "true"
f_depend "ip6tables -" "true"
if [ "${package_ok}" = "false" ]
then
f_log "package 'ip6tables' not found, IPv6 support will be disabled"
unset adb_wanif6
else
f_depend "kmod-ipt-nat6" "true"
f_depend "kmod-ipt-nat6 -" "true"
if [ "${package_ok}" = "false" ]
then
f_log "package 'kmod-ipt-nat6' not found, IPv6 support will be disabled"
@ -231,13 +223,13 @@ f_envcheck()
# check uclient-fetch/wget dependencies
#
f_depend "uclient-fetch" "true"
f_depend "uclient-fetch -" "true"
if [ "${package_ok}" = "true" ]
then
f_depend "libustream-polarssl" "true"
f_depend "libustream-polarssl -" "true"
if [ "${package_ok}" = "false" ]
then
f_depend "libustream-\(mbedtls\|openssl\|cyassl\)" "true"
f_depend "libustream-\(mbedtls\|openssl\|cyassl\) -" "true"
if [ "${package_ok}" = "true" ]
then
adb_fetch="$(which uclient-fetch)"
@ -248,7 +240,7 @@ f_envcheck()
fi
if [ -z "${adb_fetch}" ]
then
f_depend "wget" "true"
f_depend "wget -" "true"
if [ "${package_ok}" = "true" ]
then
adb_fetch="$(which wget)"
@ -263,7 +255,7 @@ f_envcheck()
# check ca-certificate package and set fetch parm accordingly
#
f_depend "ca-certificates" "true"
f_depend "ca-certificates -" "true"
if [ "${package_ok}" = "false" ]
then
fetch_parm="${fetch_parm} --no-check-certificate"
@ -452,7 +444,7 @@ f_depend()
local check_only="${2}"
package_ok="true"
check="$(printf "${pkg_list}" | grep "^${package} -")"
check="$(printf "${pkg_list}" | grep "^${package}")"
if [ "${check_only}" = "true" ] && [ -z "${check}" ]
then
package_ok="false"


+ 1
- 1
net/adblock/files/adblock-update.sh View File

@ -10,7 +10,7 @@
#
adb_pid="${$}"
adb_pidfile="/var/run/adblock.pid"
adb_scriptver="1.4.6"
adb_scriptver="1.4.7"
adb_mincfgver="2.4"
adb_scriptdir="${0%/*}"
if [ -r "${adb_pidfile}" ]


+ 15
- 2
net/adblock/files/adblock.init View File

@ -2,10 +2,11 @@
#
START=99
EXTRA_COMMANDS="toggle stats cfgup"
EXTRA_COMMANDS="toggle stats cfgup query"
EXTRA_HELP=" toggle Toggle adblock 'on' or 'off'
stats Update adblock statistics
cfgup Update adblock configuration file"
cfgup Update adblock configuration file
query <DOMAIN> Query active blocklists for specific domain"
adb_debug=0
adb_pid="${$}"
@ -127,3 +128,15 @@ cfgup()
fi
return 0
}
query()
{
if [ -z "${1}" ]
then
f_log "no domain query input, please submit a specific search domain"
else
f_log "results for search domain '${1}':"
grep "${1}" "/tmp/dnsmasq.d/adb_list"*
fi
return 0
}

Loading…
Cancel
Save