Browse Source

Merge pull request #7282 from dibdot/travelmate

travelmate: update 1.3.0
lilik-openwrt-22.03
Dirk Brenken 6 years ago
committed by GitHub
parent
commit
a20433e813
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 136 additions and 83 deletions
  1. +1
    -1
      net/travelmate/Makefile
  2. +3
    -1
      net/travelmate/files/README.md
  3. +1
    -0
      net/travelmate/files/travelmate.conf
  4. +131
    -81
      net/travelmate/files/travelmate.sh

+ 1
- 1
net/travelmate/Makefile View File

@ -6,7 +6,7 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=travelmate
PKG_VERSION:=1.2.4
PKG_VERSION:=1.3.0
PKG_RELEASE:=1
PKG_LICENSE:=GPL-3.0+
PKG_MAINTAINER:=Dirk Brenken <dev@brenken.org>


+ 3
- 1
net/travelmate/files/README.md View File

@ -13,6 +13,7 @@ To avoid these kind of deadlocks, travelmate set all station interfaces in an "a
* support all kinds of uplinks, incl. hidden and enterprise uplinks
* continuously checks the existing uplink connection (quality), e.g. for conditional uplink (dis-) connections
* captive portal detection with internet online check and a 'heartbeat' function to keep the uplink connection up & running
* proactively scan and switch to a higher prioritized uplink, despite of an already existing connection
* support devices with multiple radios in any order
* procd init and hotplug support
* runtime information available via LuCI & via 'status' init command
@ -42,11 +43,12 @@ To avoid these kind of deadlocks, travelmate set all station interfaces in an "a
* trm\_enabled => main switch to enable/disable the travelmate service (bool/default: '0', disabled)
* trm\_debug => enable/disable debug logging (bool/default: '0', disabled)
* trm\_captive => enable/disable the captive portal detection (bool/default: '1', enabled)
* trm\_proactive => enable/disable the proactive uplink switch (bool/default: '1', enabled)
* trm\_minquality => minimum signal quality threshold as percent for conditional uplink (dis-) connections (int/default: '35', valid range: 20-80)
* trm\_maxwait => how long (in seconds) should travelmate wait for a successful wlan interface reload action (int/default: '30', valid range: 20-40)
* trm\_maxretry => how many times should travelmate try to connect to an uplink (int/default: '3', valid range: 1-10)
* trm\_timeout => overall retry timeout in seconds (int/default: '60', valid range: 30-300)
* trm\_radio => limit travelmate to a single radio (e.g. 'radio1') or change the overall scanning order (e.g. 'radio1 radio2 radio0') (default: not set, use all radios 0-n)
* trm\_radio => limit travelmate to a single radio (e.g. 'radio1') or change the overall scanning priority (e.g. 'radio1 radio2 radio0') (default: not set, use all radios 0-n)
* trm\_iface => main uplink / procd trigger network interface (default: trm_wwan)
* trm\_triggerdelay => additional trigger delay in seconds before travelmate processing begins (int/default: '2')


+ 1
- 0
net/travelmate/files/travelmate.conf View File

@ -4,6 +4,7 @@
config travelmate 'global'
option trm_enabled '0'
option trm_captive '1'
option trm_proactive '1'
option trm_iface 'trm_wwan'
option trm_triggerdelay '2'
option trm_debug '0'


+ 131
- 81
net/travelmate/files/travelmate.sh View File

@ -10,11 +10,12 @@
#
LC_ALL=C
PATH="/usr/sbin:/usr/bin:/sbin:/bin"
trm_ver="1.2.4"
trm_ver="1.3.0"
trm_sysver="unknown"
trm_enabled=0
trm_debug=0
trm_captive=1
trm_proactive=1
trm_captiveurl="http://captive.apple.com"
trm_minquality=35
trm_maxretry=3
@ -29,6 +30,17 @@ trm_wpa="$(command -v wpa_supplicant)"
trm_action="${1:-"start"}"
trm_pidfile="/var/run/travelmate.pid"
# trim leading and trailing whitespace characters
#
f_trim()
{
local trim="$1"
trim="${trim#"${trim%%[![:space:]]*}"}"
trim="${trim%"${trim##*[![:space:]]}"}"
printf '%s' "${trim}"
}
# load travelmate environment
#
f_envload()
@ -42,17 +54,12 @@ f_envload()
then
sys_desc="$(printf '%s' "${sys_call}" | jsonfilter -e '@.release.description')"
sys_model="$(printf '%s' "${sys_call}" | jsonfilter -e '@.model')"
sys_ver="$(cat /etc/turris-version 2>/dev/null)"
if [ -n "${sys_ver}" ]
then
sys_desc="${sys_desc}/${sys_ver}"
fi
trm_sysver="${sys_model}, ${sys_desc}"
fi
# (re-)initialize global list variables
#
unset trm_devlist trm_stalist trm_radiolist
unset trm_devlist trm_stalist trm_radiolist trm_active_sta
# load config and check 'enabled' option
#
@ -94,7 +101,7 @@ f_envload()
#
f_prep()
{
local eap_rc=0 config="${1}"
local eap_rc=0 config="${1}" proactive="${2}"
local mode="$(uci_get wireless "${config}" mode)"
local network="$(uci_get wireless "${config}" network)"
local radio="$(uci_get wireless "${config}" device)"
@ -103,16 +110,20 @@ f_prep()
if [ -z "${trm_radio}" ] && [ -z "$(printf "%s" "${trm_radiolist}" | grep -Fo " ${radio}")" ]
then
trm_radiolist="${trm_radiolist} ${radio}"
trm_radiolist="$(f_trim "${trm_radiolist} ${radio}")"
elif [ -n "${trm_radio}" ] && [ -z "${trm_radiolist}" ]
then
trm_radiolist="$(printf "%s" "${trm_radio}" | awk '{while(match(tolower($0),/radio[0-9]/)){ORS=" ";print substr(tolower($0),RSTART,RLENGTH);$0=substr($0,RSTART+RLENGTH)}}')"
trm_radiolist="$(f_trim "$(printf "%s" "${trm_radio}" | \
awk '{while(match(tolower($0),/radio[0-9]/)){ORS=" ";print substr(tolower($0),RSTART,RLENGTH);$0=substr($0,RSTART+RLENGTH)}}')")"
fi
if [ "${mode}" = "sta" ] && [ "${network}" = "${trm_iface}" ]
then
if [ -z "${disabled}" ] || [ "${disabled}" = "0" ]
if ([ -z "${disabled}" ] || [ "${disabled}" = "0" ]) && ([ ${proactive} -eq 0 ] || [ "${trm_ifstatus}" != "true" ])
then
uci_set wireless "${config}" disabled 1
elif [ "${disabled}" = "0" ] && [ "${trm_ifstatus}" = "true" ] && [ -z "${trm_active_sta}" ] && [ ${proactive} -eq 1 ]
then
trm_active_sta="${config}"
fi
if [ -n "${eaptype}" ]
then
@ -120,10 +131,10 @@ f_prep()
fi
if [ -z "${eaptype}" ] || [ ${eap_rc} -eq 0 ]
then
trm_stalist="${trm_stalist} ${config}_${radio}"
trm_stalist="$(f_trim "${trm_stalist} ${config}_${radio}")"
fi
fi
f_log "debug" "f_prep ::: config: ${config}, mode: ${mode}, network: ${network}, eap_rc: ${eap_rc}, radio: ${radio}, trm_radio: ${trm_radio:-"-"}, disabled: ${disabled}"
f_log "debug" "f_prep ::: config: ${config}, mode: ${mode}, network: ${network}, eap_rc: ${eap_rc}, radio: ${radio}, trm_radio: ${trm_radio:-"-"}, trm_active_sta: ${trm_active_sta:-"-"}, proactive: ${proactive}, disabled: ${disabled}"
}
# check interface status
@ -133,9 +144,10 @@ f_check()
local IFS ifname radio dev_status config sta_essid sta_bssid result wait=1 mode="${1}" status="${2:-"false"}"
trm_ifquality=0
trm_ifstatus="false"
if [ "${mode}" != "initial" ]
if [ "${mode}" = "initial" ]
then
trm_ifstatus="false"
else
ubus call network reload
fi
while [ ${wait} -le ${trm_maxwait} ]
@ -155,7 +167,7 @@ f_check()
result="$(printf "%s" "${dev_status}" | jsonfilter -l1 -e "@.${radio}.up")"
if [ "${result}" = "true" ] && [ -z "$(printf "%s" "${trm_devlist}" | grep -Fo " ${radio}")" ]
then
trm_devlist="${trm_devlist} ${radio}"
trm_devlist="$(f_trim "${trm_devlist} ${radio}")"
fi
done
if [ "${trm_devlist}" = "${trm_radiolist}" ] || [ ${wait} -eq ${trm_maxwait} ]
@ -189,13 +201,16 @@ f_check()
fi
if [ "${mode}" = "initial" ] || [ "${trm_ifstatus}" = "true" ]
then
if ([ "${trm_ifstatus}" != "true" ] && [ "${trm_ifstatus}" != "${status}" ]) || [ ${trm_ifquality} -lt ${trm_minquality} ]
if ([ "${trm_ifstatus}" != "true" ] && [ "${trm_ifstatus}" != "${status}" ]) || \
([ "${trm_ifstatus}" = "true" ] && [ "${mode}" = "sta" ] && [ -n "${trm_active_sta}" ]) || \
[ ${trm_ifquality} -lt ${trm_minquality} ]
then
f_jsnup
fi
if [ "${mode}" = "initial" ] && [ "${trm_captive}" -eq 1 ] && [ "${trm_ifstatus}" = "true" ]
then
result="$(${trm_fetch} --timeout=$(( ${trm_maxwait} / 3 )) --spider "${trm_captiveurl}" 2>&1 | awk '/^Redirected/{printf "%s" "net cp \047"$NF"\047";exit}/^Download completed/{printf "%s" "net ok";exit}/^Failed|^Connection error/{printf "%s" "net nok";exit}')"
result="$(${trm_fetch} --timeout=$(( ${trm_maxwait} / 3 )) --spider "${trm_captiveurl}" 2>&1 | \
awk '/^Redirected/{printf "%s" "net cp \047"$NF"\047";exit}/^Download completed/{printf "%s" "net ok";exit}/^Failed|^Connection error/{printf "%s" "net nok";exit}')"
if [ -n "${result}" ] && ([ -z "${trm_connection}" ] || [ "${result}" != "${trm_connection%/*}" ])
then
trm_connection="${result}/${trm_ifquality}"
@ -243,7 +258,7 @@ f_jsnup()
then
if [ -z "$(printf "%s" "${faulty_list}" | grep -Fo "${faulty_station}")" ]
then
faulty_list="${faulty_list} ${faulty_station}"
faulty_list="$(f_trim "${faulty_list} ${faulty_station}")"
fi
fi
json_add_string "travelmate_status" "${status}"
@ -281,98 +296,133 @@ f_log()
#
f_main()
{
local IFS cnt dev config scan scan_list scan_essid scan_bssid scan_quality sta sta_essid sta_bssid sta_radio sta_iface faulty_list
local IFS cnt dev config scan scan_list scan_essid scan_bssid scan_quality faulty_list
local sta sta_essid sta_bssid sta_radio sta_iface active_essid active_bssid active_radio active_prio
f_check "initial"
if [ "${trm_ifstatus}" != "true" ]
if [ "${trm_ifstatus}" != "true" ] || [ ${trm_proactive} -eq 1 ]
then
config_load wireless
config_foreach f_prep wifi-iface
uci_commit wireless
f_check "dev" "running / not connected"
config_foreach f_prep wifi-iface ${trm_proactive}
if [ "${trm_ifstatus}" = "true" ] && [ ${trm_proactive} -eq 1 ]
then
json_get_var station_id "station_id"
active_radio="${station_id%%/*}"
active_essid="${station_id%/*}"
active_essid="${active_essid#*/}"
active_bssid="${station_id##*/}"
f_check "dev" "true"
else
uci_commit wireless
f_check "dev"
fi
json_get_var faulty_list "faulty_stations"
f_log "debug" "f_main ::: iwinfo: ${trm_iwinfo}, dev_list: ${trm_devlist}, sta_list: ${trm_stalist:0:800}, faulty_list: ${faulty_list:-"-"}"
f_log "debug" "f_main ::: iwinfo: ${trm_iwinfo:-"-"}, dev_list: ${trm_devlist:-"-"}, sta_list: ${trm_stalist:0:800}, faulty_list: ${faulty_list:-"-"}"
for dev in ${trm_devlist}
do
f_log "debug" "f_main ::: dev: ${dev}"
if [ -z "$(printf "%s" "${trm_stalist}" | grep -Fo "_${dev}")" ]
then
f_log "debug" "f_main ::: no station on '${dev}' - continue"
continue
fi
cnt=1
while [ ${cnt} -le ${trm_maxretry} ]
do
scan_list="$(${trm_iwinfo} "${dev}" scan 2>/dev/null | awk 'BEGIN{FS="[/ ]"}/Address:/{var1=$NF}/ESSID:/{var2="";for(i=12;i<=NF;i++)if(var2==""){var2=$i}else{var2=var2" "$i}}/Quality:/{printf "%i,%s,%s\n",(100/$NF*$(NF-1)),var1,var2}' | sort -rn | awk '{ORS=",";print $0}')"
f_log "debug" "f_main ::: dev: ${dev}, scan_list: ${scan_list:0:800}, cnt: ${cnt}, max_cnt: ${trm_maxretry}"
if [ -n "${scan_list}" ]
then
for sta in ${trm_stalist}
f_log "debug" "f_main ::: cnt: ${cnt}, max_cnt: ${trm_maxretry}"
for sta in ${trm_stalist}
do
config="${sta%%_*}"
sta_radio="${sta##*_}"
sta_essid="$(uci_get wireless "${config}" ssid)"
sta_bssid="$(uci_get wireless "${config}" bssid)"
sta_iface="$(uci_get wireless "${config}" network)"
json_get_var faulty_list "faulty_stations"
if [ -n "$(printf "%s" "${faulty_list}" | grep -Fo "${sta_radio}/${sta_essid}/${sta_bssid}")" ]
then
f_log "debug" "f_main ::: faulty station '${sta_radio}/${sta_essid}/${sta_bssid:-"-"}' - continue"
continue
fi
if ([ "${dev}" = "${active_radio}" ] && [ "${sta_essid}" = "${active_essid}" ] && [ "${sta_bssid:-"-"}" = "${active_bssid}" ]) || \
([ "${dev}" != "${active_radio}" ] && [ "${active_prio}" = "true" ])
then
active_prio="true"
f_log "debug" "f_main ::: active station prioritized '${active_radio}/${active_essid}/${active_bssid:-"-"}' - break"
break
fi
if [ -z "${scan_list}" ]
then
scan_list="$(f_trim "$(${trm_iwinfo} "${dev}" scan 2>/dev/null | \
awk 'BEGIN{FS="[/ ]"}/Address:/{var1=$NF}/ESSID:/{var2="";for(i=12;i<=NF;i++) \
if(var2==""){var2=$i}else{var2=var2" "$i}}/Quality:/{printf "%i,%s,%s\n",(100/$NF*$(NF-1)),var1,var2}' | \
sort -rn | awk '{ORS=",";print $0}')")"
f_log "debug" "f_main ::: scan_list: ${scan_list:0:800}"
fi
IFS=","
for scan in ${scan_list}
do
config="${sta%%_*}"
sta_radio="${sta##*_}"
sta_essid="$(uci_get wireless "${config}" ssid)"
sta_bssid="$(uci_get wireless "${config}" bssid)"
sta_iface="$(uci_get wireless "${config}" network)"
json_get_var faulty_list "faulty_stations"
if [ -n "$(printf "%s" "${faulty_list}" | grep -Fo "${sta_radio}/${sta_essid}/${sta_bssid}")" ]
if [ -z "${scan_quality}" ]
then
scan_quality="${scan}"
elif [ -z "${scan_bssid}" ]
then
scan_bssid="${scan}"
elif [ -z "${scan_essid}" ]
then
continue
scan_essid="${scan}"
fi
IFS=","
for scan in ${scan_list}
do
if [ -z "${scan_quality}" ]
then
scan_quality="${scan}"
elif [ -z "${scan_bssid}" ]
then
scan_bssid="${scan}"
elif [ -z "${scan_essid}" ]
then
scan_essid="${scan}"
fi
if [ -n "${scan_quality}" ] && [ -n "${scan_bssid}" ] && [ -n "${scan_essid}" ]
if [ -n "${scan_quality}" ] && [ -n "${scan_bssid}" ] && [ -n "${scan_essid}" ]
then
if [ ${scan_quality} -ge ${trm_minquality} ]
then
if [ ${scan_quality} -ge ${trm_minquality} ]
if (([ "${scan_essid}" = "\"${sta_essid}\"" ] && ([ -z "${sta_bssid}" ] || [ "${scan_bssid}" = "${sta_bssid}" ])) || \
([ "${scan_bssid}" = "${sta_bssid}" ] && [ "${scan_essid}" = "unknown" ])) && [ "${dev}" = "${sta_radio}" ]
then
if (([ "${scan_essid}" = "\"${sta_essid}\"" ] && ([ -z "${sta_bssid}" ] || [ "${scan_bssid}" = "${sta_bssid}" ])) || \
([ "${scan_bssid}" = "${sta_bssid}" ] && [ "${scan_essid}" = "unknown" ])) && [ "${dev}" = "${sta_radio}" ]
f_log "debug" "f_main ::: scan_quality: ${scan_quality}, sta_bssid: ${sta_bssid}, scan_bssid: ${scan_bssid}, sta_essid: \"${sta_essid}\", scan_essid: ${scan_essid}"
if [ "${dev}" = "${active_radio}" ] && [ -n "${trm_active_sta}" ]
then
uci_set wireless "${trm_active_sta}" disabled 1
unset trm_connection
fi
uci_set wireless "${config}" disabled 0
f_check "sta"
if [ "${trm_ifstatus}" = "true" ]
then
uci_commit wireless
f_check "initial"
f_log "info" "connected to uplink '${sta_radio}/${sta_essid}/${sta_bssid:-"-"}' (${trm_sysver})"
return 0
elif [ ${cnt} -eq ${trm_maxretry} ]
then
f_log "debug" "f_main ::: scan_quality: ${scan_quality}, scan_bssid: ${scan_bssid}, scan_essid: ${scan_essid}"
uci_set wireless "${config}" disabled 0
f_check "sta"
if [ "${trm_ifstatus}" = "true" ]
uci -q revert wireless
f_check "rev"
if [ "${dev}" = "${active_radio}" ] && [ -n "${trm_active_sta}" ]
then
uci_commit wireless
f_check "initial"
f_log "info" "connected to uplink '${sta_radio}/${sta_essid}/${sta_bssid:-"-"}' (${trm_sysver})"
return 0
elif [ ${cnt} -eq ${trm_maxretry} ]
then
uci_set wireless "${config}" disabled 1
uci_commit wireless
faulty_station="${sta_radio}/${sta_essid}/${sta_bssid:-"-"}"
f_jsnup "${faulty_station}"
f_log "info" "can't connect to uplink '${sta_radio}/${sta_essid}/${sta_bssid:-"-"}', uplink disabled (${trm_sysver})"
f_check "rev"
break
else
uci -q revert wireless
f_jsnup
f_log "info" "can't connect to uplink '${sta_radio}/${sta_essid}/${sta_bssid:-"-"}' (${trm_sysver})"
f_check "rev"
break
fi
faulty_station="${sta_radio}/${sta_essid}/${sta_bssid:-"-"}"
f_jsnup "${faulty_station}"
f_log "info" "uplink disabled '${sta_radio}/${sta_essid}/${sta_bssid:-"-"}' (${trm_sysver})"
break
else
uci -q revert wireless
f_check "rev"
f_jsnup
f_log "info" "can't connect to uplink '${sta_radio}/${sta_essid}/${sta_bssid:-"-"}' (${trm_sysver})"
unset scan_list
break
fi
fi
unset scan_quality scan_bssid scan_essid
fi
done
unset IFS scan_quality scan_bssid scan_essid
unset scan_quality scan_bssid scan_essid
fi
done
fi
unset IFS scan_quality scan_bssid scan_essid
done
cnt=$(( cnt + 1 ))
sleep $(( ${trm_maxwait} / 6 ))
done
unset scan_list
done
fi
}


Loading…
Cancel
Save