Merge pull request #4361 from EricLuehrsen/unbound_may2017

unbound: add option for dhcp UCI domain mx srv and cname

net/unbound/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=unbound
 PKG_VERSION:=1.6.2
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE

net/unbound/files/README.md

@@ -73,7 +73,7 @@ config dhcp 'lan'
 ```
 
 ### Unbound and odhcpd
-You may ask can Unbound replace dnsmasq? You can have DHCP-DNS records with Unbound and odhcpd only. The UCI scripts will allow Unbound to act like dnsmasq. When odhcpd configures each DHCP lease, it will call a script. The script provided with Unbound will read the lease file for DHCP-DNS records. You **must install** `unbound-control`, because the lease records are added and removed without starting, stopping, flushing cache, or re-writing conf files. (_restart overhead can be excessive with even a few mobile devices._)
+You may ask, "can Unbound replace dnsmasq?" You can have DHCP-DNS records with Unbound and odhcpd only. The UCI scripts will allow Unbound to act like dnsmasq. When odhcpd configures each DHCP lease, it will call a script. The script provided with Unbound will read the lease file for DHCP-DNS records. You **must install** `unbound-control`, because the lease records are added and removed without starting, stopping, flushing cache, or re-writing conf files. (_restart overhead can be excessive with even a few mobile devices._)
 
 Don't forget to disable or uninstall dnsmasq when you don't intend to use it. Strange results may occur. If you want to use default dnsmasq+odhcpd and add Unbound on top, then use the dnsmasq-serial or dnsmasq-parallel methods above.
 
@@ -106,8 +106,7 @@ config dhcp 'lan'
   option leasetime '12h'
   option ra 'server'
   option ra_management '1'
-  # issue your ULA and avoid default [fe80::]
-  list dns 'fdxx:xxxx:xxxx::1'
+  # odhcpd should issue ULA [fd00::/8] by default
   ...
 
 config odhcpd 'odhcpd'
@@ -146,6 +145,14 @@ The former will be added to the end of the `server:` clause. The later will be a
 config unbound
   Currently only one instance is supported.
 
+  option add_extra_dns '0'
+    Level. Execute traditional DNS overrides found in `/etc/config/dhcp`.
+    Optional so you may use other Unbound conf or redirect to NSD instance.
+    0 - Ignore `/etc/config/dhcp`
+    1 - Use only 'domain' clause (host records)
+    2 - Use 'domain', 'mxhost', and 'srvhost' clauses
+    3 - Use all of 'domain', 'mxhost', 'srvhost', and 'cname' clauses
+
   option add_local_fqdn '0'
     Level. This puts your routers host name in the LAN (local) DNS.
     Each level is more detailed and comprehensive.
@@ -271,9 +278,15 @@ config unbound
     embedded devices don't have a real time power off clock. NTP needs
     DNS to resolve servers. This works around the chicken-and-egg.
 
-  list domain_insecure
-    List. Domains or pointers that you wish to skip DNSSEC. Your DHCP
-    domains and pointers in dnsmasq will get this automatically.
+  list domain_insecure 'www.example.com'
+    Domain. Domains that you wish to skip DNSSEC. Your DHCP
+    domains and pointers will get this automatically.
+
+  list trigger 'lan' 'wan'
+    Interface (logical). This option is a work around for netifd/procd
+    interaction with WAN DHCPv6. Minor RA or DHCP changes in IP6 can
+    cause netifd to execute procd interface reload. Limit Unbound procd
+    triggers to LAN and WAN (IP4 only) to prevent restart @2-3 minutes.
 ```
 
 

net/unbound/files/odhcpd.sh

@@ -45,7 +45,7 @@ odhcpd_zonedata() {
   local dhcp_ls_old=$UNBOUND_VARDIR/dhcp_lease.old
   local dhcp_ls_add=$UNBOUND_VARDIR/dhcp_lease.add
   local dhcp_ls_del=$UNBOUND_VARDIR/dhcp_lease.del
-  local dhcp_origin=$( uci get dhcp.@odhcpd[0].leasefile )
+  local dhcp_origin=$( uci_get dhcp.@odhcpd[0].leasefile )
 
   config_load unbound
   config_foreach odhcpd_settings unbound

net/unbound/files/unbound.init

@@ -47,7 +47,7 @@ start_service() {
 
 stop_service() {
   unbound_stop
-  
+
   # Wait! on restart Unbound may take time writing closure stats to syslog
   pidof $PROG && sleep 1
 }
@@ -55,9 +55,20 @@ stop_service() {
 ##############################################################################
 
 service_triggers() {
-  # use soft reload to prevent continuous stop-start and cache flush
+  local trigger
+  local triggers=$( uci_get unbound.@unbound[0].trigger )
+
+  PROCD_RELOAD_DELAY=2000
   procd_add_reload_trigger "unbound"
-  procd_add_raw_trigger "interface.*.up" 2000 /etc/init.d/unbound reload
+
+  if [ -n "$triggers" ] ; then
+    for trigger in $triggers ; do
+      # due to some netifd/procd interactions with IP6, limit interfaces
+      procd_add_reload_interface_trigger "$trigger"
+    done
+  else
+    procd_add_raw_trigger "interface.*.up" 2000 /etc/init.d/unbound reload
+  fi
 }
 
 ##############################################################################

net/unbound/files/unbound.sh

@@ -14,9 +14,12 @@
 #
 ##############################################################################
 #
-# This builds the basic UCI components currently supported for Unbound. It is
-# intentionally NOT comprehensive and bundles a lot of options. The UCI is to
-# be a simpler presentation of the total Unbound conf set.
+# Unbound is a full featured recursive server with many options. The UCI
+# provided tries to simplify and bundle options. This should make Unbound
+# easier to deploy. Even light duty routers may resolve recursively instead of
+# depending on a stub with the ISP. The UCI also attempts to replicate dnsmasq
+# features as used in base LEDE/OpenWrt. If there is a desire for more
+# detailed tuning, then manual conf file overrides are also made available.
 #
 ##############################################################################
 
@@ -36,6 +39,7 @@ UNBOUND_B_QRY_MINST=0
 
 UNBOUND_D_DOMAIN_TYPE=static
 UNBOUND_D_DHCP_LINK=none
+UNBOUND_D_EXTRA_DNS=0
 UNBOUND_D_LAN_FQDN=0
 UNBOUND_D_PROTOCOL=mixed
 UNBOUND_D_RESOURCE=small
@@ -57,6 +61,11 @@ UNBOUND_TXT_HOSTNAME=thisrouter
 
 ##############################################################################
 
+# keep track of local-domain: assignments during inserted resource records
+UNBOUND_LIST_DOMAINS=""
+
+##############################################################################
+
 UNBOUND_LIBDIR=/usr/lib/unbound
 UNBOUND_VARDIR=/var/lib/unbound
 
@@ -69,7 +78,7 @@ UNBOUND_CONFFILE=$UNBOUND_VARDIR/unbound.conf
 
 UNBOUND_KEYFILE=$UNBOUND_VARDIR/root.key
 UNBOUND_HINTFILE=$UNBOUND_VARDIR/root.hints
-UNBOUND_TIMEFILE=$UNBOUND_VARDIR/unbound.time
+UNBOUND_TIMEFILE=$UNBOUND_VARDIR/hotplug.time
 
 ##############################################################################
 
@@ -124,8 +133,8 @@ create_interface_dns() {
 
   ifdashname="${ifname//./-}"
   ipcommand="ip -o address show $ifname"
-  addresses="$($ipcommand | awk '/inet/{sub(/\/.*/,"",$4); print $4}')"
-  ulaprefix="$(uci_get network @globals[0] ula_prefix)"
+  addresses=$( $ipcommand | awk '/inet/{sub(/\/.*/,"",$4); print $4}' )
+  ulaprefix=$( uci_get network.@globals[0].ula_prefix )
   host_fqdn="$UNBOUND_TXT_HOSTNAME.$UNBOUND_TXT_DOMAIN"
   if_fqdn="$ifdashname.$host_fqdn"
 
@@ -223,6 +232,135 @@ create_interface_dns() {
 
 ##############################################################################
 
+create_local_zone() {
+  local target="$1"
+  local partial domain found
+
+
+  if [ -n "$UNBOUND_LIST_DOMAINS" ] ; then
+    for domain in $UNBOUND_LIST_DOMAINS ; do
+      case $target in
+      *"${domain}")
+        found=1
+        break
+        ;;
+
+      [A-Za-z0-9]*.[A-Za-z0-9]*)
+        found=0
+        ;;
+
+      *) # no dots
+        found=1
+        break
+        ;;
+      esac
+    done
+  else
+    found=0
+  fi
+
+
+  if [ $found -eq 0 ] ; then
+    # New Zone! Bundle local-zones: by first two name tiers "abcd.tld."
+    partial=$( echo "$target" | awk -F. '{ j=NF ; i=j-1; print $i"."$j }' )
+    UNBOUND_LIST_DOMAINS="$UNBOUND_LIST_DOMAINS $partial"
+    echo "  local-zone: $partial. transparent" >> $UNBOUND_CONFFILE
+  fi
+}
+
+##############################################################################
+
+create_host_record() {
+  local cfg="$1"
+  local ip name
+
+  # basefiles dhcp "domain" clause which means host A, AAAA, and PRT record
+  config_get ip   "$cfg" ip
+  config_get name "$cfg" name
+
+
+  if [ -n "$name" -a -n "$ip" ] ; then
+    create_local_zone "$name"
+
+    {
+      case $ip in
+      fe80:*|169.254.*)
+        echo "  # note link address $ip for host $name"
+        ;;
+
+      [1-9a-f]*:*[0-9a-f])
+        echo "  local-data: \"$name. 120 IN AAAA $ip\""
+        echo "  local-data-ptr: \"$ip 120 $name\""
+        ;;
+
+      [1-9]*.*[0-9])
+        echo "  local-data: \"$name. 120 IN A $ip\""
+        echo "  local-data-ptr: \"$ip 120 $name\""
+        ;;
+      esac
+    } >> $UNBOUND_CONFFILE
+  fi
+}
+
+##############################################################################
+
+create_mx_record() {
+  local cfg="$1"
+  local domain relay pref
+
+  # Insert a static MX record
+  config_get domain "$cfg" domain
+  config_get relay  "$cfg" relay
+  config_get pref   "$cfg" pref 10
+
+
+  if [ -n "$domain" -a -n "$relay" ] ; then
+    create_local_zone "$domain"
+    echo "  local-data: \"$domain. 120 IN MX $pref $relay.\"" \
+          >> $UNBOUND_CONFFILE
+  fi
+}
+
+##############################################################################
+
+create_srv_record() {
+  local cfg="$1"
+  local srv target port class weight
+
+  # Insert a static SRV record such as SIP server
+  config_get srv    "$cfg" srv
+  config_get target "$cfg" target
+  config_get port   "$cfg" port
+  config_get class  "$cfg" class 10
+  config_get weight "$cfg" weight 10
+
+
+  if [ -n "$srv" -a -n "$target" -a -n "$port" ] ; then
+    create_local_zone "$srv"
+    echo "  local-data: \"$srv. 120 IN SRV $class $weight $port $target.\"" \
+          >> $UNBOUND_CONFFILE
+  fi
+}
+
+##############################################################################
+
+create_cname_record() {
+  local cfg="$1"
+  local cname target
+
+  # Insert static CNAME record
+  config_get cname  "$cfg" cname
+  config_get target "$cfg" target
+
+
+  if [ -n "$cname" -a -n "$target" ] ; then
+    create_local_zone "$cname"
+    echo "  local-data: \"$cname. 120 IN CNAME $target.\"" >> $UNBOUND_CONFFILE
+  fi
+}
+
+##############################################################################
+
 create_access_control() {
   local cfg="$1"
   local subnets subnets4 subnets6
@@ -257,8 +395,8 @@ create_domain_insecure() {
 
 unbound_mkdir() {
   local resolvsym=0
-  local dhcp_origin=$( uci get dhcp.@odhcpd[0].leasefile )
-  local dhcp_dir=$( dirname "$dhcp_origin" )
+  local dhcp_origin=$( uci_get dhcp.@odhcpd[0].leasefile )
+  local dhcp_dir=$( dirname $dhcp_origin )
   local filestuff
 
 
@@ -780,11 +918,35 @@ unbound_hostname() {
 
 ##############################################################################
 
+unbound_records() {
+  if [ "$UNBOUND_D_EXTRA_DNS" -gt 0 ] ; then
+    # Parasite from the uci.dhcp.domain clauses
+    config_load dhcp
+    config_foreach create_host_record domain
+  fi
+
+
+  if [ "$UNBOUND_D_EXTRA_DNS" -gt 1 ] ; then
+    config_foreach create_srv_record srvhost
+    config_foreach create_mx_record mxhost
+  fi
+
+
+  if [ "$UNBOUND_D_EXTRA_DNS" -gt 2 ] ; then
+    config_foreach create_cname_record cname
+  fi
+
+
+  echo >> $UNBOUND_CONFFILE
+}
+
+##############################################################################
+
 unbound_uci() {
   local cfg="$1"
   local dnsmasqpath hostnm
 
-  hostnm="$(uci_get system.@system[0].hostname | awk '{print tolower($0)}')"
+  hostnm=$( uci_get system.@system[0].hostname | awk '{print tolower($0)}' )
   UNBOUND_TXT_HOSTNAME=${hostnm:-thisrouter}
 
   config_get_bool UNBOUND_B_SLAAC6_MAC "$cfg" dhcp4_slaac6 0
@@ -808,6 +970,7 @@ unbound_uci() {
 
   config_get UNBOUND_D_DOMAIN_TYPE "$cfg" domain_type static
   config_get UNBOUND_D_DHCP_LINK   "$cfg" dhcp_link none
+  config_get UNBOUND_D_EXTRA_DNS   "$cfg" add_extra_dns 0
   config_get UNBOUND_D_LAN_FQDN    "$cfg" add_local_fqdn 0
   config_get UNBOUND_D_PROTOCOL    "$cfg" protocol mixed
   config_get UNBOUND_D_RECURSION   "$cfg" recursion passive
@@ -817,6 +980,7 @@ unbound_uci() {
   config_get UNBOUND_TTL_MIN     "$cfg" ttl_min 120
   config_get UNBOUND_TXT_DOMAIN  "$cfg" domain lan
 
+  UNBOUND_LIST_DOMAINS="nowhere $UNBOUND_TXT_DOMAIN"
 
   if [ "$UNBOUND_D_DHCP_LINK" = "none" ] ; then
     config_get_bool UNBOUND_B_DNSMASQ   "$cfg" dnsmasq_link_dns 0
@@ -824,8 +988,8 @@ unbound_uci() {
 
     if [ "$UNBOUND_B_DNSMASQ" -gt 0 ] ; then
       UNBOUND_D_DHCP_LINK=dnsmasq
-      
-      
+
+
       if [ ! -f "$UNBOUND_TIMEFILE" ] ; then
         logger -t unbound -s "Please use 'dhcp_link' selector instead"
       fi
@@ -898,6 +1062,7 @@ unbound_start() {
       dnsmasq_link
     else
       unbound_hostname
+      unbound_records
     fi
 
     unbound_control

net/unbound/files/unbound.uci

@@ -1,4 +1,5 @@
 config unbound
+	option add_extra_dns '0'
 	option add_local_fqdn '1'
 	option add_wan_fqdn '0'
 	option dhcp_link 'none'
@@ -24,5 +25,7 @@ config unbound
 	option unbound_control '0'
 	option validator '0'
 	option validator_ntp '1'
-	#list domain_insecure ''
+	list trigger 'lan'
+	list trigger 'wan'
+	#list domain_insecure 'www.example.com'