Merge pull request #436 from cyanidium/master

nut: New package for Network UPS Tools

net/nut/Config.in

@@ -0,0 +1,107 @@
+	config NUT_SERVER
+		depends on PACKAGE_nut
+		bool "Include server components (upsd)"
+		help
+			upsd is responsible for serving the data from the drivers to the
+			clients. It connects to each driver and maintains a local cache of the
+			current state. Queries from the clients are served from this cache, so
+			delays are minimal. This program is essential, and must be running at
+			all times to actually make any use out of the drivers and clients.
+		default y
+		
+	config NUT_CLIENTS_UPSC
+		depends on PACKAGE_nut
+		bool "Include command line client (upsc)"
+		help
+			upsc is provided as a quick way to poll the status of a UPS server. It
+			can be used inside shell scripts and other programs that need UPS data
+			but don't want to include the full interface.
+		default y
+		
+	config NUT_CLIENTS_UPSLOG
+		depends on PACKAGE_nut
+		bool "Include logging client (upslog)"
+		help
+			upslog is a daemon that will poll a UPS at periodic intervals, fetch the
+			variables that interest you, format them, and write them to a file.
+		default n
+		
+	config NUT_CLIENTS_UPSCMD
+		depends on PACKAGE_nut
+		bool "Include UPS controller (upscmd)"
+		help
+			upscmd allows you to invoke "instant commands" in your UPS hardware. Not
+			all hardware supports this, so check the list with -l to see if anything
+			will work on your equipment. On hardware that supports it, you can use
+			this program to start and stop battery tests, invoke a front panel test
+			(beep!), turn the load on or off, and more.
+		default n
+		
+	config NUT_CLIENTS_UPSRW
+		depends on PACKAGE_nut
+		bool "Include UPS variable editor (upsrw)"
+		help
+			upsrw allows you to view and change the read/write variables inside your
+			UPS. It sends commands via the upsd to your driver, which configures the
+			hardware for you. The list of variables that allow you to change their
+			values is based on the capabilities of your UPS equipment. Not all
+			models support this feature. Typically, cheaper hardware does not
+			support any of them.
+		default n
+		
+	config NUT_CLIENTS_UPSMON
+		depends on PACKAGE_nut
+		bool "Include monitor and shutdown controller (upsmon)"
+		help
+			upsmon is the client process that is responsible for the most important
+			part of UPS monitoring--shutting down the system when the power goes
+			out. It can call out to other helper programs for notification purposes
+			during power events. upsmon can monitor multiple systems using a single
+			process. Every UPS that is defined in the upsmon.conf configuration file
+			is assigned a power value and a type (slave or master).
+		default y
+		
+	config NUT_CLIENTS_UPSSCHED
+		depends on NUT_CLIENTS_UPSMON
+		bool "Include helper for triggering events from upsmon (upssched)"
+		help
+			upssched was created to allow users to execute programs at times relative
+			to events being monitored by upsmon. The original purpose was to allow
+			for a shutdown to occur after some fixed period on battery, but there are
+			other uses that are possible.
+			You can alternatively write your own script and save some space.
+		default n
+	
+	config NUT_SSL
+		depends on PACKAGE_nut
+		bool "Build with support for OpenSSL"
+		help
+			SSL allows sessions between upsd and clients to be encrypted and can
+			also be used to authenticate servers. This means that stealing port
+			3493 from upsd will no longer net you interesting passwords. SSL is
+			available via OpenSSL on OpenWRT (NSS doesn't seem to work). If you
+			are happy with using passwords to authenticate clients, you can save
+			some space and build NUT without SSL support.
+		default n
+	
+	config NUT_DRIVER_SERIAL
+		depends on PACKAGE_nut
+		bool "Build with support for serial drivers"
+		help
+			If you have a UPS connected via serial, select this.
+		default n
+	
+	config NUT_DRIVER_USB
+		depends on PACKAGE_nut
+		bool "Build with support for USB drivers"
+		help
+			If you have a UPS connected via USB, select this.
+		default y
+	
+	config NUT_DRIVER_SNMP
+		depends on PACKAGE_nut
+		bool "Build with support for SNMP drivers"
+		help
+			If you have a UPS you can connect to via SNMP, select this.
+		default n
+		

net/nut/Makefile

@@ -0,0 +1,279 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=nut
+PKG_VERSION:=2.7.2
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://www.networkupstools.org/source/2.7/
+PKG_MD5SUM:=c3568b42e058cfc385b46d25140dced4
+PKG_MAINTAINER:=Martin Rowe <martin.p.rowe@gmail.com>
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=LICENSE-GPL2
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/nut-$(PKG_VERSION)
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/nut/Default
+	SECTION:=net
+	CATEGORY:=Network
+	URL:=http://www.networkupstools.org/
+	DEPENDS:=nut
+endef
+
+define Package/nut/description
+Network UPS Tools (NUT) is a client/server monitoring system that
+allows computers to share uninterruptible power supply (UPS) and
+power distribution unit (PDU) hardware. Clients access the hardware
+through the server, and are notified whenever the power status
+changes.
+endef
+
+define Package/nut
+	$(call Package/nut/Default)
+	TITLE:=Network UPS Tools
+	DEPENDS:= \
+		+NUT_DRIVER_SNMP:libnetsnmp \
+		+NUT_DRIVER_USB:libusb-compat \
+		+NUT_SSL:libopenssl
+	MENU:=1
+endef
+
+define Package/nut/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/nut/conffiles
+	/etc/nut/nut.conf
+	$(if $(CONFIG_NUT_CLIENTS_UPSMON),/etc/nut/upsmon.conf)
+	$(if $(CONFIG_NUT_CLIENTS_UPSSCHED),/etc/nut/upssched.conf)
+	$(if $(CONFIG_NUT_SERVER),/etc/nut/ups.conf)
+	$(if $(CONFIG_NUT_SERVER),/etc/nut/upsd.conf)
+	$(if $(CONFIG_NUT_SERVER),/etc/nut/upsd.users)
+endef
+
+define Package/nut/install
+	$(INSTALL_DIR) $(1)/etc/nut
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/nut.conf.sample $(1)/etc/nut/nut.conf
+	$(if $(or $(CONFIG_NUT_CLIENTS_UPSC),\
+		$(CONFIG_NUT_CLIENTS_UPSCMD),\
+		$(CONFIG_NUT_CLIENTS_LOG),\
+		$(CONFIG_NUT_CLIENTS_UPSRW),\
+		$(CONFIG_NUT_CLIENTS_UPSMON),\
+		$(CONFIG_NUT_CLIENTS_UPSSCHED)),$(CP) $(PKG_INSTALL_DIR)/usr/lib/libupsclient.so* $(1)/usr/lib/)
+	$(if $(or $(CONFIG_NUT_SERVER),\
+		$(CONFIG_NUT_CLIENTS_UPSMON)),$(INSTALL_DIR) $(1)/etc/init.d)
+	$(if $(CONFIG_NUT_SERVER),$(INSTALL_DIR) $(1)/lib/nut)
+	$(if $(CONFIG_NUT_SERVER),$(INSTALL_DIR) $(1)/usr/share/nut)
+	$(if $(CONFIG_NUT_SERVER),$(CP) ./files/nut-server.init $(1)/etc/init.d/)
+	$(if $(CONFIG_NUT_SERVER),$(CP) $(PKG_INSTALL_DIR)/usr/sbin/upsd $(1)/usr/sbin)
+	$(if $(CONFIG_NUT_SERVER),$(CP) $(PKG_INSTALL_DIR)/usr/sbin/upsdrvctl $(1)/usr/sbin)
+	$(if $(CONFIG_NUT_SERVER),$(CP) $(PKG_INSTALL_DIR)/usr/share/nut/cmdvartab $(1)/usr/share/nut/)
+	$(if $(CONFIG_NUT_SERVER),$(CP) $(PKG_INSTALL_DIR)/usr/share/nut/driver.list $(1)/usr/share/nut/)
+	$(if $(CONFIG_NUT_SERVER),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/ups.conf.sample $(1)/etc/nut/ups.conf)
+	$(if $(CONFIG_NUT_SERVER),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsd.conf.sample $(1)/etc/nut/upsd.conf)
+	$(if $(CONFIG_NUT_SERVER),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsd.users.sample $(1)/etc/nut/upsd.users)
+	$(if $(CONFIG_NUT_CLIENTS_UPSC),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upsc $(1)/usr/bin/)
+	$(if $(CONFIG_NUT_CLIENTS_UPSCMD),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upscmd $(1)/usr/bin/)
+	$(if $(CONFIG_NUT_CLIENTS_LOG),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upslog $(1)/usr/bin/)
+	$(if $(CONFIG_NUT_CLIENTS_UPSRW),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upsrw $(1)/usr/bin/)
+	$(if $(CONFIG_NUT_CLIENTS_UPSMON),$(CP) ./files/nut-monitor.init $(1)/etc/init.d/)
+	$(if $(CONFIG_NUT_CLIENTS_UPSMON),$(CP) $(PKG_INSTALL_DIR)/usr/sbin/upsmon $(1)/usr/sbin/)
+	$(if $(CONFIG_NUT_CLIENTS_UPSMON),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upsmon.conf.sample $(1)/etc/nut/upsmon.conf)
+	$(if $(CONFIG_NUT_CLIENTS_UPSSCHED),$(CP) $(PKG_INSTALL_DIR)/usr/bin/upssched-cmd $(1)/usr/bin/)
+	$(if $(CONFIG_NUT_CLIENTS_UPSSCHED),$(CP) $(PKG_INSTALL_DIR)/usr/sbin/upssched $(1)/usr/sbin/)
+	$(if $(CONFIG_NUT_CLIENTS_UPSSCHED),$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/nut/upssched.conf.sample $(1)/etc/nut/upssched.conf)
+endef
+
+# Dealing with all of the drivers is very repetitive, but the previous
+# maintainer had a neat solution which just needed some tweaking.
+define DriverPackage
+        define Package/nut-driver-$(2)
+		$(call Package/nut/Default)
+		TITLE:=$(2) (NUT $(1) driver)
+		$(if $(filter $(1),serial),DEPENDS+= @NUT_DRIVER_SERIAL)
+		$(if $(filter $(1),snmp),DEPENDS+= @NUT_DRIVER_SNMP)
+		$(if $(filter $(1),usb),DEPENDS+= @NUT_DRIVER_USB)
+        endef
+	# Deliberately empty description in order to trigger a build failure.
+	# It should be overridden by the list below, and when updating to a
+	# new version of nut we will need to provide descriptions for any new
+	# drivers.
+        define Package/nut-driver-$(2)/description
+		
+        endef
+        define Package/nut-driver-$(2)/install
+        	$(INSTALL_DIR) $$(1)/lib/nut
+		$(CP) $$(PKG_INSTALL_DIR)/lib/nut/$(2) $$(1)/lib/nut/
+		$(if $(filter $(2),clone),$(CP) $$(PKG_INSTALL_DIR)/lib/nut/$(2)-outlet $$(1)/lib/nut/)
+        endef
+endef
+define DriverDescription
+        define Package/nut-driver-$(2)/description
+		$(3)
+        endef
+endef
+# These lists are lifted *directly* from drivers/Makefile.am in the nut
+# source tree. This it to make it simpler to keep in sync when updating
+# to a newer version of nut. Do not edit this manually.
+#
+# DO NOT EDIT (except to update with a fresh cut/paste)!
+SERIAL_DRIVERLIST = al175 bcmxcp belkin belkinunv bestfcom	\
+ bestfortress bestuferrups bestups dummy-ups etapro everups	 \
+ gamatronic genericups isbmex liebert liebert-esp2 masterguard metasys	\
+ oldmge-shut mge-utalk microdowell mge-shut oneac optiups powercom rhino	 \
+ safenet skel solis tripplite tripplitesu upscode2 victronups powerpanel \
+ blazer_ser clone clone-outlet ivtscd apcsmart apcsmart-old apcupsd-ups riello_ser	\
+ nutdrv_qx
+SNMP_DRIVERLIST = snmp-ups
+USB_LIBUSB_DRIVERLIST = usbhid-ups bcmxcp_usb tripplite_usb \
+ blazer_usb richcomm_usb riello_usb \
+ nutdrv_atcl_usb \
+ nutdrv_qx
+# END: DO NOT EDIT!
+SERIAL_DRIVERLIST_IGNORE:=skel clone-outlet nutdrv_qx
+# nutdrv_qx can be either USB or serial. Given most routers have USB
+# instead of serial ports, and not wanting two identical packages with
+# different names that conflict with each other, only the option for the
+# driver with USB bindings is provided. If you really want to save that
+# tiny bit of space and build it without USB support, remove nutdrv_qx
+# from the previous line.
+
+$(foreach d,$(filter-out $(SERIAL_DRIVERLIST_IGNORE),$(SERIAL_DRIVERLIST)),$(eval $(call DriverPackage,serial,$(d))))
+$(foreach d,$(SNMP_DRIVERLIST),$(eval $(call DriverPackage,snmp,$(d))))
+$(foreach d,$(USB_LIBUSB_DRIVERLIST),$(eval $(call DriverPackage,usb,$(d))))
+
+$(eval $(call DriverDescription,serial,al175,\
+	Driver for Eltek UPS models with AL175 alarm module))
+$(eval $(call DriverDescription,serial,bcmxcp,\
+	Driver for UPSes supporting the serial BCM/XCP protocol))
+$(eval $(call DriverDescription,serial,belkin,\
+	Driver for Belkin serial UPS equipment))
+$(eval $(call DriverDescription,serial,belkinunv,\
+	Driver for Belkin "Universal UPS" and compatible))
+$(eval $(call DriverDescription,serial,bestfcom,\
+	Driver for Best Power Fortress/Ferrups))
+$(eval $(call DriverDescription,serial,bestfortress,\
+	Driver for old Best Fortress UPS equipment))
+$(eval $(call DriverDescription,serial,bestuferrups,\
+	Driver for Best Power Micro-Ferrups))
+$(eval $(call DriverDescription,serial,bestups,\
+	Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment))
+$(eval $(call DriverDescription,serial,dummy-ups,\
+	Driver for multi-purpose UPS emulation))
+$(eval $(call DriverDescription,serial,etapro,\
+	Driver for ETA UPS equipment))
+$(eval $(call DriverDescription,serial,everups,\
+	Driver for Ever UPS models))
+$(eval $(call DriverDescription,serial,gamatronic,\
+	Driver for Gamatronic UPS equipment))
+$(eval $(call DriverDescription,serial,genericups,\
+	Driver for contact-closure UPS equipment))
+$(eval $(call DriverDescription,serial,isbmex,\
+	Driver for ISBMEX UPS equipment))
+$(eval $(call DriverDescription,serial,liebert,\
+	Driver for Liebert contact-closure UPS equipment))
+$(eval $(call DriverDescription,serial,liebert-esp2,\
+	Driver for Liebert UPS, using the ESP-II serial protocol))
+$(eval $(call DriverDescription,serial,masterguard,\
+	Driver for Masterguard UPS equipment))
+$(eval $(call DriverDescription,serial,metasys,\
+	Driver for Meta System UPS equipment))
+$(eval $(call DriverDescription,serial,oldmge-shut,\
+	Driver for SHUT Protocol UPS equipment, deprecated, use mge-shut))
+$(eval $(call DriverDescription,serial,mge-utalk,\
+	Driver for MGE UPS SYSTEMS UTalk protocol equipment))
+$(eval $(call DriverDescription,serial,microdowell,\
+	Driver for Microdowell Enterprise UPS series))
+$(eval $(call DriverDescription,serial,mge-shut,\
+	Driver for SHUT Protocol UPS equipment))
+$(eval $(call DriverDescription,serial,oneac,\
+	Driver for Oneac UPS equipment))
+$(eval $(call DriverDescription,serial,optiups,\
+	Driver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment))
+$(eval $(call DriverDescription,serial,powercom,\
+	Driver for serial Powercom/Trust/Advice UPS equipment))
+$(eval $(call DriverDescription,serial,rhino,\
+	Driver for Brazilian Microsol RHINO UPS equipment))
+$(eval $(call DriverDescription,serial,safenet,\
+	Driver for SafeNet compatible UPS equipment))
+$(eval $(call DriverDescription,serial,solis,\
+	Driver for Brazilian Microsol SOLIS UPS equipment))
+$(eval $(call DriverDescription,serial,tripplite,\
+	Driver for Tripp-Lite SmartPro UPS equipment))
+$(eval $(call DriverDescription,serial,tripplitesu,\
+	Driver for Tripp-Lite SmartOnline (SU) UPS equipment))
+$(eval $(call DriverDescription,serial,upscode2,\
+	Driver for UPScode II compatible UPS equipment))
+$(eval $(call DriverDescription,serial,victronups,\
+	Driver for IMV/Victron UPS unit Match, Match Lite, NetUps))
+$(eval $(call DriverDescription,serial,powerpanel,\
+	Driver for PowerPanel Plus compatible UPS equipment))
+$(eval $(call DriverDescription,serial,blazer_ser,\
+	Driver for Megatec/Q1 protocol serial based UPS equipment))
+$(eval $(call DriverDescription,serial,clone,\
+	UPS driver clone))
+$(eval $(call DriverDescription,serial,ivtscd,\
+	Driver for the IVT Solar Controller Device))
+$(eval $(call DriverDescription,serial,apcsmart,\
+	Driver for American Power Conversion Smart Protocol UPS equipment))
+$(eval $(call DriverDescription,serial,apcsmart-old,\
+	Driver for American Power Conversion Smart Protocol UPS equipment))
+$(eval $(call DriverDescription,serial,apcupsd-ups,\
+	Driver for apcupsd client access))
+$(eval $(call DriverDescription,serial,riello_ser,\
+	Driver for Riello UPS Protocol UPS equipment))
+$(eval $(call DriverDescription,snmp,snmp-ups,\
+	Multi-MIB Driver for SNMP UPS equipment))
+$(eval $(call DriverDescription,usb,usbhid-ups,\
+	Driver for USB/HID UPS equipment))
+$(eval $(call DriverDescription,usb,bcmxcp_usb,\
+	Experimental driver for UPSes supporting the BCM/XCP protocol over USB))
+$(eval $(call DriverDescription,usb,tripplite_usb,\
+	Driver for older Tripp Lite USB UPSes (not PDC HID)))
+$(eval $(call DriverDescription,usb,blazer_usb,\
+	Driver for Megatec/Q1 protocol USB based UPS equipment))
+$(eval $(call DriverDescription,usb,richcomm_usb,\
+	Driver for UPS equipment using Richcomm dry-contact to USB solution))
+$(eval $(call DriverDescription,usb,riello_usb,\
+	Driver for Riello UPS Protocol UPS equipment via USB))
+$(eval $(call DriverDescription,usb,nutdrv_atcl_usb,\
+	Driver for ATCL FOR UPS equipment))
+$(eval $(call DriverDescription,usb,nutdrv_qx,\
+	Driver for Q* protocol serial and USB based UPS equipment))
+
+CONFIGURE_ARGS += \
+	--$(if $(CONFIG_NUT_DRIVER_SERIAL),with,without)-serial \
+	--$(if $(CONFIG_NUT_DRIVER_USB),with,without)-usb \
+	--$(if $(CONFIG_NUT_DRIVER_SNMP),with,without)-snmp \
+	--without-neon \
+	--without-powerman \
+	--without-ipmi \
+	--without-freeipmi \
+	--$(if $(CONFIG_NUT_SSL),with,without)-ssl $(if $(CONFIG_NUT_SSL),--with-openssl) \
+	--without-avahi \
+	--without-libltdl \
+	--with-user=root \
+	--with-group=root \
+	--sysconfdir=/etc/nut \
+	--with-drvpath=/lib/nut \
+	--with-statepath=/var/run \
+	--datadir=/usr/share/nut
+
+$(eval $(call BuildPackage,nut))
+$(foreach d,$(filter-out $(SERIAL_DRIVERLIST_IGNORE),$(SERIAL_DRIVERLIST)),$(eval $(call BuildPackage,nut-driver-$(d))))
+$(foreach d,$(SNMP_DRIVERLIST),$(eval $(call BuildPackage,nut-driver-$(d))))
+$(foreach d,$(USB_LIBUSB_DRIVERLIST),$(eval $(call BuildPackage,nut-driver-$(d))))

net/nut/files/nut-monitor.init

@@ -0,0 +1,21 @@
+#!/bin/sh /etc/rc.common
+
+START=60
+USE_PROCD=1
+
+restart() {
+	stop_service
+	start_service
+}
+
+start_service() {
+	upsmon -p
+}
+
+stop_service() {
+	upsmon -c stop
+}
+
+reload_service() {
+	upsmon -c reload
+}

net/nut/files/nut-server.init

@@ -0,0 +1,23 @@
+#!/bin/sh /etc/rc.common
+
+START=50
+USE_PROCD=1
+
+restart() {
+	stop_service
+	start_service
+}
+
+start_service() {
+	upsdrvctl start
+	upsd
+}
+
+stop_service() {
+	upsd -c stop
+	upsdrvctl stop
+}
+
+reload_service() {
+	upsd -c reload
+}

net/nut/patches/001-fix-missing-libmath-flags.patch

@@ -0,0 +1,22 @@
+--- a/drivers/Makefile.am
++++ b/drivers/Makefile.am
+@@ -171,7 +171,7 @@ tripplite_usb_SOURCES = tripplite_usb.c
+ tripplite_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
+ 
+ bcmxcp_usb_SOURCES = bcmxcp_usb.c bcmxcp.c usb-common.c
+-bcmxcp_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS)
++bcmxcp_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
+ 
+ blazer_usb_SOURCES = blazer.c blazer_usb.c libusb.c usb-common.c
+ blazer_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
+--- a/drivers/Makefile.in
++++ b/drivers/Makefile.in
+@@ -785,7 +785,7 @@ usbhid_ups_LDADD = $(LDADD_DRIVERS) $(LI
+ tripplite_usb_SOURCES = tripplite_usb.c libusb.c usb-common.c
+ tripplite_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
+ bcmxcp_usb_SOURCES = bcmxcp_usb.c bcmxcp.c usb-common.c
+-bcmxcp_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS)
++bcmxcp_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
+ blazer_usb_SOURCES = blazer.c blazer_usb.c libusb.c usb-common.c
+ blazer_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm
+ nutdrv_atcl_usb_SOURCES = nutdrv_atcl_usb.c usb-common.c

net/nut/patches/010-ignore_automake_k_bug.patch

@@ -0,0 +1,28 @@
+--- a/Makefile.in
++++ b/Makefile.in
+@@ -431,12 +431,6 @@ distclean-libtool:
+ # (2) otherwise, pass the desired values on the `make' command line.
+ $(RECURSIVE_TARGETS):
+ 	@fail= failcom='exit 1'; \
+-	for f in x $$MAKEFLAGS; do \
+-	  case $$f in \
+-	    *=* | --[!k]*);; \
+-	    *k*) failcom='fail=yes';; \
+-	  esac; \
+-	done; \
+ 	dot_seen=no; \
+ 	target=`echo $@ | sed s/-recursive//`; \
+ 	list='$(SUBDIRS)'; for subdir in $$list; do \
+@@ -456,12 +450,6 @@ $(RECURSIVE_TARGETS):
+ 
+ $(RECURSIVE_CLEAN_TARGETS):
+ 	@fail= failcom='exit 1'; \
+-	for f in x $$MAKEFLAGS; do \
+-	  case $$f in \
+-	    *=* | --[!k]*);; \
+-	    *k*) failcom='fail=yes';; \
+-	  esac; \
+-	done; \
+ 	dot_seen=no; \
+ 	case "$@" in \
+ 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \