Merge pull request #2736 from dibdot/adblock

adblock: update 1.1.12

net/adblock/Makefile

@@ -7,7 +7,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=adblock
-PKG_VERSION:=1.1.11
+PKG_VERSION:=1.1.12
 PKG_RELEASE:=1
 PKG_LICENSE:=GPL-3.0+
 PKG_MAINTAINER:=Dirk Brenken <dev@brenken.org>

net/adblock/files/README.md

@@ -39,7 +39,7 @@ A lot of people already use adblocker plugins within their desktop browsers, but
     * => weekly updates, approx. 12.000 entries
     * [winhelp](http://winhelp2002.mvps.org)
     * => infrequent updates, approx. 15.000 entries
-    * [winspy](https://raw.githubusercontent.com/crazy-max/WindowsSpyBlocker/master/hostsBlockWindowsSpy.txt)
+    * [winspy](https://raw.githubusercontent.com/crazy-max/WindowsSpyBlocker/master/hosts/windows10_spy.txt)
     * => infrequent updates, approx. 120 entries
     * [yoyo](http://pgl.yoyo.org/adservers)
     * => weekly updates, approx. 2.500 entries (enabled by default)
@@ -102,6 +102,7 @@ A lot of people already use adblocker plugins within their desktop browsers, but
 * **new list sources:** you could add new blocklist sources on your own via uci config, all you need is a source url and an awk one-liner (see example below)
 * **AP mode:** in AP mode adblock uses automatically the local router ip as nullip address. To make sure that your LuCI interface will be still accessible, please change the local uhttpd instance to ports <> 80/443 (see example below)
 * **debugging:** for script debugging please change the 'DEBUG' variable in the header of _/usr/bin/adblock-update.sh_ from '0' to '1' and start this script directly (without any parameters)
+* **disable active dns probing in windows:** to prevent a possible yellow exclamation mark on your internet connection icon (which wrongly means connected, but no internet), please change the following registry key/value from "1" to "0" _HKLM\SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet\EnableActiveProbing_
 
 ## Further adblock config options
 * usually the adblock autodetection works quite well and no manual config overrides are needed, all options apply to the 'global' config section:
@@ -126,29 +127,29 @@ A lot of people already use adblocker plugins within their desktop browsers, but
 **example blacklist entry (/etc/adblock/adblock.blacklist):**
 <pre><code>
 ads.example.com
+
+This rule blocks:
+  http://ads.example.com/foo.gif
+  http://server1.ads.example.com/foo.gif
+  https://ads.example.com:8000/
+
+This rule doesn't block:
+  http://ads.example.com.ua/foo.gif
+  http://example.com/
 </code></pre>
   
-This rule blocks:  
-http://ads.example.com/foo.gif  
-http://server1.ads.example.com/foo.gif  
-https://ads.example.com:8000/  
-  
-This rule doesn't block:  
-http://ads.example.com.ua/foo.gif  
-http://example.com/  
-  
 **example whitelist entry (/etc/adblock/adblock.whitelist):**
 <pre><code>
 analytics.com
+
+This rule removes _all_ domains from the blocklists with this string in it, i.e.:
+  google-analytics.com
+  ssl.google-analytics.com
+  api.gameanalytics.com
+  photos.daily-deals.analoganalytics.com
+  adblockanalytics.com
 </code></pre>
   
-This rule removes _all_ domains from the blocklists with this string in it, i.e.:  
-  google-analytics.com  
-  ssl.google-analytics.com  
-  api.gameanalytics.com  
-  photos.daily-deals.analoganalytics.com  
-  adblockanalytics.com  
-  
 **example uhttpd configuration in AP mode:**
 <pre><code>
 # configuration found in /etc/config/uhttpd
@@ -159,12 +160,37 @@ config uhttpd 'main'
     list listen_https '0.0.0.0:445'
 </code></pre>
   
+**example grep for blocked (sub-)domains in adblock source files:**
+<pre><code>
+grep "google-analytics.com" "/tmp/dnsmasq.d/adb_list"*
+
+This will output all matches with corresponding source files:
+  /tmp/dnsmasq.d/adb_list.winhelp:address=/ssl.google-analytics.com/192.0.2.1
+  /tmp/dnsmasq.d/adb_list.winhelp:address=/www.google-analytics.com/192.0.2.1
+  /tmp/dnsmasq.d/adb_list.yoyo:address=/google-analytics.com/192.0.2.1
+</code></pre>
+  
+**example to find blocked domains on certain sites for whitelisting:**
+<pre><code>
+1. the easy way ...
+enable the network analysis builtins in chrome or firefox to identify domains
+which are redirected to the adblock null-ip (default 192.0.2.1), add these domains to your whitelist
+
+2. a bit harder ...
+enable 'Log queries' in the dnsmasq configuration (via LuCI Network => DHCP/DNS),
+ssh to your router and start tracing with 'logread -f -e "dnsmasq" -e "192.0.2.1"'
+switch to your client, access the relevant site and check all domains
+that are blocked/listed in logread, add these domains to your whitelist
+
+=> finally restart the adblock service (/etc/init.d/adblock restart) in both variants
+</code></pre>
+  
 **example to add a new blocklist source:**
 <pre><code>
 1. the easy way ...
 example: https://easylist-downloads.adblockplus.org/rolist+easylist.txt
 adblock already supports an easylist source, called 'ruadlist'. To add the additional local easylist
-as a new source, copy the existing config source 'ruadlist' section and change only 
+as a new source, copy the existing config source 'ruadlist' section and change only
 the source name, the url and the description - that's all!
 
 config source 'rolist'

net/adblock/files/adblock-helper.sh

@@ -115,7 +115,7 @@ f_envload()
     adb_uci="$(which uci)"
     adb_iptv4="$(which iptables)"
     adb_iptv6="$(which ip6tables)"
-    adb_fetch="$(which wget-ssl)"
+    adb_fetch="$(which wget)"
     unset adb_srclist adb_revsrclist adb_errsrclist
 
     # check 'enabled' & 'version' config options

net/adblock/files/adblock-update.sh

@@ -37,8 +37,8 @@ fi
 # get current directory and set script/config version
 #
 adb_scriptdir="${0%/*}"
-adb_scriptver="1.1.11"
-adb_mincfgver="1.2"
+adb_scriptver="1.1.12"
+adb_mincfgver="1.3"
 
 # source in adblock function library
 #

net/adblock/files/adblock.conf

@@ -3,7 +3,7 @@
 
 config adblock 'global'
 	option adb_enabled '1'
-	option adb_cfgver '1.2'
+	option adb_cfgver '1.3'
 	option adb_whitelist '/etc/adblock/adblock.whitelist'
 	option adb_whitelist_rset '\$1 ~/^([A-Za-z0-9_-]+\.){1,}[A-Za-z]+/{print tolower(\$1)}'
 	option adb_forcedns '1'
@@ -115,7 +115,7 @@ config source 'whocares'
 
 config source 'winspy'
 	option enabled '0'
-	option adb_src 'https://raw.githubusercontent.com/crazy-max/WindowsSpyBlocker/master/hosts/hostsBlockWindowsSpy.txt'
+	option adb_src 'https://raw.githubusercontent.com/crazy-max/WindowsSpyBlocker/master/hosts/windows10_spy.txt'
 	option adb_src_rset '\$0 ~/^0\.0\.0\.0[ \t]+([A-Za-z0-9_-]+\.){1,}[A-Za-z]+/{print tolower(\$2)}'
 	option adb_src_desc 'focus on windows spy & telemetry domains, infrequent updates, approx. 120 entries'