|
|
|
@ -0,0 +1,786 @@ |
|
|
|
# VPN Policy-Based Routing |
|
|
|
|
|
|
|
## Description |
|
|
|
|
|
|
|
This service allows you to define rules (policies) for routing traffic via WAN or your L2TP, Openconnect, OpenVPN, PPTP or Wireguard tunnels. Policies can be set based on any combination of local/remote ports, local/remote IPv4 or IPv6 addresses/subnets or domains. This service supersedes the [VPN Bypass](https://github.com/openwrt/packages/blob/master/net/vpnbypass/files/README.md) service, by supporting IPv6 and by allowing you to set explicit rules not just for WAN interface (bypassing OpenVPN tunnel), but for L2TP, Openconnect, OpenVPN, PPTP and Wireguard tunnels as well. |
|
|
|
|
|
|
|
## Features |
|
|
|
|
|
|
|
### Gateways/Tunnels |
|
|
|
|
|
|
|
- Any policy can target either WAN or a VPN tunnel interface. |
|
|
|
- L2TP tunnels supported (with protocol names l2tp\*). |
|
|
|
- Openconnect tunnels supported (with protocol names openconnect\*). |
|
|
|
- OpenVPN tunnels supported (with device names tun\* or tap\*).<sup>[1](#footnote1)</sup> <sup>[2](#footnote2)</sup> |
|
|
|
- PPTP tunnels supported (with protocol names pptp\*). |
|
|
|
- Wireguard tunnels supported (with protocol names wireguard\*). |
|
|
|
|
|
|
|
### IPv4/IPv6/Port-Based Policies |
|
|
|
|
|
|
|
- Policies based on local names, IPs or subnets. You can specify a single IP (as in ```192.168.1.70```) or a local subnet (as in ```192.168.1.81/29```) or a local device name (as in ```nexusplayer```). IPv6 addresses are also supported. |
|
|
|
- Policies based on local ports numbers. Can be set as an individual port number (```32400```), a range (```5060-5061```), a space-separated list (```80 8080```) or a combination of the above (```80 8080 5060-5061```). Limited to 15 space-separated entries per policy. |
|
|
|
- Policies based on remote IPs/subnets or domain names. Same format/syntax as local IPs/subnets. |
|
|
|
- Policies based on remote ports numbers. Same format/syntax and restrictions as local ports. |
|
|
|
- You can mix the IP addresses/subnets and device (or domain) names in one field separating them by space (like this: ```66.220.2.74 he.net tunnelbroker.net```). |
|
|
|
- See [Policy Options](#policy-options) section for more information. |
|
|
|
|
|
|
|
### DSCP Tag-Based Policies |
|
|
|
|
|
|
|
You can also set policies for traffic with specific DSCP tag. On Windows 10, for example, you can mark traffic from specific apps with DSCP tags (instructions for tagging specific app traffic in Windows 10 can be found [here](http://serverfault.com/questions/769843/cannot-set-dscp-on-windows-10-pro-via-group-policy)). |
|
|
|
|
|
|
|
### Custom User Files |
|
|
|
|
|
|
|
If the custom user file includes are set, the service will load and execute them after setting up ip tables and ipsets and processing policies. This allows, for example, to add large numbers of domains/IP addresses to ipsets without manually adding all of them to the config file. |
|
|
|
|
|
|
|
Two example custom user-files are provided: ```/etc/vpn-policy-routing.aws.user``` and ```/etc/vpn-policy-routing.netflix.user```. They are provided to pull the AWS and Netflix IP addresses into the ```wan``` ipset respectively. |
|
|
|
|
|
|
|
### Strict Enforcement |
|
|
|
|
|
|
|
- Supports strict policy enforcement, even if the policy interface is down -- resulting in network being unreachable for specific policy (enabled by default). |
|
|
|
|
|
|
|
### Use DNSMASQ ipset |
|
|
|
|
|
|
|
- Service can be set to utilize ```dnsmasq```'s ```ipset``` support, which requires the ```dnsmasq-full``` package to be installed (see [How to install dnsmasq-full](#how-to-install-dnsmasq-full)). This significantly improves the start up time because ```dnsmasq``` resolves the domain names and adds them to appropriate ```ipset``` in background. Another benefit of using ```dnsmasq```'s ```ipset``` is that it also automatically adds third-level domains to the ```ipset```: if ```domain.com``` is added to the policy, this policy will affect all ```*.domain.com``` subdomains. This also works for top-level domains as well, a policy targeting the ```at``` for example, will affect all the ```*.at``` domains. |
|
|
|
- Please review the [Footnotes/Known Issues](#footnotesknown-issues) section, specifically [<sup>#5</sup>](#footnote5) and any other information in that section relevant to domain-based routing/DNS. |
|
|
|
|
|
|
|
### Customization |
|
|
|
|
|
|
|
- Can be fully configured with ```uci``` commands or by editing ```/etc/config/vpn-policy-routing``` file. |
|
|
|
- Has a companion package (```luci-app-vpn-policy-routing```) so policies can be configured with Web UI. |
|
|
|
|
|
|
|
### Other Features |
|
|
|
|
|
|
|
- Doesn't stay in memory, creates the routing tables and ```iptables``` rules/```ipset``` entries which are automatically updated when supported/monitored interface changes. |
|
|
|
- Proudly made in :maple_leaf: Canada :maple_leaf: , using locally-sourced electrons. |
|
|
|
|
|
|
|
## Screenshots (luci-app-vpn-policy-routing) |
|
|
|
|
|
|
|
Service Status |
|
|
|
 |
|
|
|
|
|
|
|
Configuration - Basic Configuration |
|
|
|
 |
|
|
|
|
|
|
|
Configuration - Advanced Configuration |
|
|
|
 |
|
|
|
|
|
|
|
Configuration - WebUI Configuration |
|
|
|
 |
|
|
|
|
|
|
|
Policies |
|
|
|
 |
|
|
|
|
|
|
|
DSCP Tagging |
|
|
|
 |
|
|
|
|
|
|
|
Custom User File Includes |
|
|
|
 |
|
|
|
|
|
|
|
## How It Works |
|
|
|
|
|
|
|
On start, this service creates routing tables for each supported interface (WAN/WAN6 and VPN tunnels) which are used to route specially marked packets. For the ```mangle``` table's ```PREROUTING```, ```FORWARD```, ```INPUT``` and ```OUTPUT``` chains, the service creates corresponding ```VPR_*``` chains to which policies are assigned. Evaluation and marking of packets happen in these ```VPR_*``` chains. If enabled, the service also creates the remote/local ipsets per each supported interface and the corresponding ```iptables``` rule for marking packets matching the ```ipset```. The service then processes the user-created policies. |
|
|
|
|
|
|
|
### Processing Policies |
|
|
|
|
|
|
|
Each policy can result in either a new ```iptables``` rule or, if ```src_ipset``` or ```dest_ipset``` are enabled, an ```ipset``` or a ```dnsmasq```'s ```ipset``` entry. |
|
|
|
|
|
|
|
- Policies with local MAC-addresses, IP addresses or local device names can be created as ```iptables``` rules or ```ipset``` entries. |
|
|
|
- Policies with local or remote ports are always created as ```iptables``` rules. |
|
|
|
- Policies with local or remote netmasks can be created as ```iptables``` rules or ```ipset``` entries. |
|
|
|
- Policies with **only** remote IP address or a domain name can be created as ```iptables``` rules or ```dnsmasq```'s ```ipset``` or an ```ipset``` (if enabled). |
|
|
|
|
|
|
|
### Policies Priorities |
|
|
|
|
|
|
|
- If support for ```src_ipset``` and ```dest_ipset``` is disabled, then only ```iptables``` rules are created. The policy priority is the same as its order as listed in Web UI and ```/etc/config/vpn-policy-routing```. The higher the policy is in the Web UI and configuration file, the higher its priority is. |
|
|
|
- If support for ```src_ipset``` and ```dest_ipset``` is enabled, then the ```ipset``` entries have the highest priority (irrelevant of their position in the policies list) and the other policies are processed in the same order as they are listed in Web UI and ```/etc/config/vpn-policy-routing```. |
|
|
|
- If there are conflicting ```ipset``` entries for different interfaces, the priority is given to the interface which is listed first in the ```/etc/config/network``` file. |
|
|
|
- If set, the ```DSCP``` policies trump all other policies, including the ```ipset``` ones. |
|
|
|
|
|
|
|
## How To Install |
|
|
|
|
|
|
|
Please make sure that the [requirements](#requirements) are satisfied and install ```vpn-policy-routing``` and ```luci-app-vpn-policy-routing``` from Web UI or connect to your router via ssh and run the following commands: |
|
|
|
|
|
|
|
```sh |
|
|
|
opkg update |
|
|
|
opkg install vpn-policy-routing luci-app-vpn-policy-routing |
|
|
|
``` |
|
|
|
|
|
|
|
If these packages are not found in the official feed/repo for your version of OpenWrt/LEDE Project, you will need to [add a custom repo to your router](https://github.com/stangri/openwrt_packages/blob/master/README.md#on-your-router) first. |
|
|
|
|
|
|
|
### Requirements |
|
|
|
|
|
|
|
This service requires the following packages to be installed on your router: ```ipset```, ```resolveip```, ```ip-full``` (or a ```busybox``` built with ```ip``` support), ```kmod-ipt-ipset``` and ```iptables```. |
|
|
|
|
|
|
|
To satisfy the requirements, connect to your router via ssh and run the following commands: |
|
|
|
|
|
|
|
```sh |
|
|
|
opkg update; opkg install ipset resolveip ip-full kmod-ipt-ipset iptables |
|
|
|
``` |
|
|
|
|
|
|
|
### How to install dnsmasq-full |
|
|
|
|
|
|
|
If you want to use ```dnsmasq```'s ```ipset``` support, you will need to install ```dnsmasq-full``` instead of the ```dnsmasq```. To do that, connect to your router via ssh and run the following command: |
|
|
|
|
|
|
|
```sh |
|
|
|
opkg update; opkg remove dnsmasq; opkg install dnsmasq-full; |
|
|
|
``` |
|
|
|
|
|
|
|
### Unmet dependencies |
|
|
|
|
|
|
|
If you are running a development (trunk/snapshot) build of OpenWrt on your router and your build is outdated (meaning that packages of the same revision/commit hash are no longer available and when you try to satisfy the [requirements](#requirements) you get errors), please flash either current OpenWrt release image or current development/snapshot image. |
|
|
|
|
|
|
|
## Service Configuration Settings |
|
|
|
|
|
|
|
As per screenshots above, in the Web UI the ```vpn-policy-routing``` configuration is split into ```Basic```, ```Advanced``` and ```WebUI``` settings. The full list of configuration parameters of ```vpn-policy-routing.config``` section is: |
|
|
|
|
|
|
|
|Web UI Section|Parameter|Type|Default|Description| |
|
|
|
| --- | --- | --- | --- | --- | |
|
|
|
|Basic|enabled|boolean|0|Enable/disable the ```vpn-policy-routing``` service.| |
|
|
|
|Basic|verbosity|integer|2|Can be set to 0, 1 or 2 to control the console and system log output verbosity of the ```vpn-policy-routing``` service.| |
|
|
|
|Basic|strict_enforcement|boolean|1|Enforce policies when their interface is down. See [Strict enforcement](#strict-enforcement) for more details.| |
|
|
|
|Basic|dest_ipset|string|none|Enable/disable use of one of the ipset options for compatible remote policies (policies with only a remote hostname and no other fields set). This speeds up service start-up and operation. Currently supported options are ```none```, ```ipset``` and ```dnsmasq.ipset``` (see [Use DNSMASQ ipset](#use-dnsmasq-ipset) for more details). Make sure the [requirements](#requirements) are met.| |
|
|
|
|Basic|src_ipset|boolean|0|Enable/disable use of ```ipset``` entries for compatible local policies (policies with only a local IP address or MAC address and no other fields set). Using ```ipset``` for local IPs/MACs is faster than using ```iptables``` rules, however it makes it impossible to enforce policies priority/order. Make sure the [requirements](#requirements) are met.| |
|
|
|
|Basic|ipv6_enabled|boolean|0|Enable/disable IPv6 support.| |
|
|
|
|Advanced|supported_interface|list/string||Allows to specify the space-separated list of interface names (in lower case) to be explicitly supported by the ```vpn-policy-routing``` service. Can be useful if your OpenVPN tunnels have dev option other than tun\* or tap\*.| |
|
|
|
|Advanced|ignored_interface|list/string||Allows to specify the space-separated list of interface names (in lower case) to be ignored by the ```vpn-policy-routing``` service. Can be useful if running both VPN server and VPN client on the router.| |
|
|
|
|Advanced|boot_timeout|number|30|Allows to specify the time (in seconds) for ```vpn-policy-routing``` service to wait for WAN gateway discovery on boot. Can be useful on devices with ADSL modem built in.| |
|
|
|
|Advanced|iptables_rule_option|append/insert|append|Allows to specify the iptables parameter for rules: ```-A``` for ```append``` and ```-I``` for ```insert```. Append is generally speaking more compatible with other packages/firewall rules. Recommended to change to ```insert``` only to improve compatibility with the ```mwan3``` package.| |
|
|
|
|Advanced|iprule_enabled|boolean|0|Add an ```ip rule```, not an ```iptables``` entry for policies with just the local address. Use with caution to manipulate policies priorities.| |
|
|
|
|Advanced|icmp_interface|string||Set the default ICMP protocol interface (interface name in lower case). Use with caution.| |
|
|
|
|Advanced|append_src_rules|string||Append local IP Tables rules. Can be used to exclude local IP addresses from destinations for policies with local address set.| |
|
|
|
|Advanced|append_dest_rules|string||Append local IP Tables rules. Can be used to exclude remote IP addresses from sources for policies with remote address set.| |
|
|
|
|Advanced|wan_tid|integer|201|Starting (WAN) Table ID number for tables created by the ```vpn-policy-routing``` service.| |
|
|
|
|Advanced|wan_mark|hexadecimal|0x010000|Starting (WAN) fw mark for marks used by the ```vpn-policy-routing``` service. High starting mark is used to avoid conflict with SQM/QoS, this can be changed by user. Change with caution together with ```fw_mask```.| |
|
|
|
|Advanced|fw_mask|hexadecimal|0xff0000|FW Mask used by the ```vpn-policy-routing``` service. High mask is used to avoid conflict with SQM/QoS, this can be changed by user. Change with caution together with ```wan_mark```.| |
|
|
|
|Web UI|webui_enable_column|boolean|0|Shows ```Enable``` checkbox column for policies, allowing to quickly enable/disable specific policy without deleting it.| |
|
|
|
|Web UI|webui_protocol_column|boolean|0|Shows ```Protocol``` column for policies, allowing to specify the protocol for ```iptables``` rules for policies.| |
|
|
|
|Web UI|webui_supported_protocol|list|0|List of protocols to display in the ```Protocol``` column for policies.| |
|
|
|
|Web UI|webui_chain_column|boolean|0|Shows ```Chain``` column for policies, allowing to specify ```PREROUTING``` (default), ```FORWARD```, ```INPUT```, or ```OUTPUT``` chain for ```iptables``` rules for policies.| |
|
|
|
|Web UI|webui_sorting|boolean|1|Shows the Up/Down buttons for policies, allowing you to move a policy up or down in the list/priority.| |
|
|
|
||wan_dscp|integer||Allows use of [DSCP-tag based policies](#dscp-tag-based-policies) for WAN interface.| |
|
|
|
||{interface_name}_dscp|integer||Allows use of [DSCP-tag based policies](#dscp-tag-based-policies) for a VPN interface.| |
|
|
|
|
|
|
|
### Default Settings |
|
|
|
|
|
|
|
Default configuration has service disabled (use Web UI to enable/start service or run ```uci set vpn-policy-routing.config.enabled=1; uci commit vpn-policy-routing;```). |
|
|
|
|
|
|
|
### Policy Options |
|
|
|
|
|
|
|
Each policy may have a combination of the options below, the ```name``` and ```interface``` options are required. |
|
|
|
|
|
|
|
The ```src_addr```, ```src_port```, ```dest_addr``` and ```dest_port``` options supports parameter negation, for example if you want to **exclude** remote port 80 from the policy, set ```dest_port="!80"``` (notice lack of space between ```!``` and parameter). |
|
|
|
|
|
|
|
|Option|Default|Description| |
|
|
|
| --- | --- | --- | |
|
|
|
|**name**||Policy name, it **must** be set.| |
|
|
|
|enabled|1|Enable/disable policy. To display the ```Enable``` checkbox column for policies in the WebUI, make sure to select ```Enabled``` for ```Show Enable Column``` in the ```Web UI``` tab.| |
|
|
|
|**interface**||Policy interface, it **must** be set.| |
|
|
|
|src_addr||List of space-separated local/source IP addresses, CIDRs, hostnames or mac addresses (colon-separated). You can also specify a local interface (like a specially created wlan) prepended by an ```@``` symbol.| |
|
|
|
|src_port||List of space-separated local/source ports or port-ranges.| |
|
|
|
|dest_addr||List of space-separated remote/target IP addresses, CIDRs or hostnames/domain names.| |
|
|
|
|dest_port||List of space-separated remote/target ports or port-ranges.| |
|
|
|
|proto|all|Policy protocol, can be any valid protocol from ```/etc/protocols``` for CLI/uci or can be selected from the values set in ```webui_supported_protocol```. To display the ```Protocol``` column for policies in the WebUI, make sure to select ```Enabled``` for ```Show Protocol Column``` in the ```Web UI``` tab.| |
|
|
|
|chain|PREROUTING|Policy chain, can be either ```PREROUTING```, ```FORWARDING```, ```INPUT``` or ```OUTPUT```. This setting is case-sensitive. To display the ```Chain``` column for policies in the WebUI, make sure to select ```Enabled``` for ```Show Chain Column``` in the ```Web UI``` tab.| |
|
|
|
|
|
|
|
### Custom User Files Include Options |
|
|
|
|
|
|
|
|Option|Default|Description| |
|
|
|
| --- | --- | --- | |
|
|
|
|**path**||Path to a custom user file (in a form of shell script), it **must** be set.| |
|
|
|
|enabled|1|Enable/disable setting.| |
|
|
|
|
|
|
|
### Example Policies |
|
|
|
|
|
|
|
#### Single IP, IP Range, Local Machine, Local MAC Address |
|
|
|
|
|
|
|
The following policies route traffic from a single IP address, a range of IP addresses, a local machine (requires definition as DHCP host record in DHCP config), a MAC-address of a local device and finally all of the above via WAN. |
|
|
|
|
|
|
|
```text |
|
|
|
config policy |
|
|
|
option name 'Local IP' |
|
|
|
option interface 'wan' |
|
|
|
option src_addr '192.168.1.70' |
|
|
|
|
|
|
|
config policy |
|
|
|
option name 'Local Subnet' |
|
|
|
option interface 'wan' |
|
|
|
option src_addr '192.168.1.81/29' |
|
|
|
|
|
|
|
config policy |
|
|
|
option name 'Local Machine' |
|
|
|
option interface 'wan' |
|
|
|
option src_addr 'dell-ubuntu' |
|
|
|
|
|
|
|
config policy |
|
|
|
option name 'Local MAC Address' |
|
|
|
option interface 'wan' |
|
|
|
option src_addr '00:0F:EA:91:04:08' |
|
|
|
|
|
|
|
config policy |
|
|
|
option name 'Local Devices' |
|
|
|
option interface 'wan' |
|
|
|
option src_addr '192.168.1.70 192.168.1.81/29 dell-ubuntu 00:0F:EA:91:04:08' |
|
|
|
|
|
|
|
``` |
|
|
|
|
|
|
|
#### Logmein Hamachi |
|
|
|
|
|
|
|
The following policy routes LogMeIn Hamachi zero-setup VPN traffic via WAN. |
|
|
|
|
|
|
|
```text |
|
|
|
config policy |
|
|
|
option name 'LogmeIn Hamachi' |
|
|
|
option interface 'wan' |
|
|
|
option dest_addr '25.0.0.0/8 hamachi.cc hamachi.com logmein.com' |
|
|
|
``` |
|
|
|
|
|
|
|
#### SIP Port |
|
|
|
|
|
|
|
The following policy routes standard SIP port traffic via WAN for both TCP and UDP protocols. |
|
|
|
|
|
|
|
```text |
|
|
|
config policy |
|
|
|
option name 'SIP Ports' |
|
|
|
option interface 'wan' |
|
|
|
option dest_port '5060' |
|
|
|
option proto 'tcp udp' |
|
|
|
``` |
|
|
|
|
|
|
|
#### Plex Media Server |
|
|
|
|
|
|
|
The following policies route Plex Media Server traffic via WAN. Please note, you'd still need to open the port in the firewall either manually or with the UPnP. |
|
|
|
|
|
|
|
```text |
|
|
|
config policy |
|
|
|
option name 'Plex Local Server' |
|
|
|
option interface 'wan' |
|
|
|
option src_port '32400' |
|
|
|
|
|
|
|
config policy |
|
|
|
option name 'Plex Remote Servers' |
|
|
|
option interface 'wan' |
|
|
|
option dest_addr 'plex.tv my.plexapp.com' |
|
|
|
``` |
|
|
|
|
|
|
|
#### Emby Media Server |
|
|
|
|
|
|
|
The following policy route Emby traffic via WAN. Please note, you'd still need to open the port in the firewall either manually or with the UPnP. |
|
|
|
|
|
|
|
```text |
|
|
|
config policy |
|
|
|
option name 'Emby Local Server' |
|
|
|
option interface 'wan' |
|
|
|
option src_port '8096 8920' |
|
|
|
|
|
|
|
config policy |
|
|
|
option name 'Emby Remote Servers' |
|
|
|
option interface 'wan' |
|
|
|
option dest_addr 'emby.media app.emby.media tv.emby.media' |
|
|
|
``` |
|
|
|
|
|
|
|
#### Local OpenVPN Server + OpenVPN Client (Scenario 1) |
|
|
|
|
|
|
|
If the OpenVPN client on your router is used as default routing (for the whole internet), make sure your settings are as following (three dots on the line imply other options can be listed in the section as well). |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/vpn-policy-routing```: |
|
|
|
|
|
|
|
```text |
|
|
|
config vpn-policy-routing 'config' |
|
|
|
list ignored_interface 'vpnserver' |
|
|
|
... |
|
|
|
|
|
|
|
config policy |
|
|
|
option name 'OpenVPN Server' |
|
|
|
option interface 'wan' |
|
|
|
option proto 'tcp' |
|
|
|
option src_port '1194' |
|
|
|
option chain 'OUTPUT' |
|
|
|
``` |
|
|
|
|
|
|
|
The network/firewall/openvpn settings are below. |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/network``` (**DO NOT** modify default OpenWrt network settings for neither ```wan``` nor ```lan```): |
|
|
|
|
|
|
|
```text |
|
|
|
config interface 'vpnclient' |
|
|
|
option proto 'none' |
|
|
|
option ifname 'ovpnc0' |
|
|
|
|
|
|
|
config interface 'vpnserver' |
|
|
|
option proto 'none' |
|
|
|
option ifname 'ovpns0' |
|
|
|
option auto '1' |
|
|
|
``` |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/firewall``` (**DO NOT** modify default OpenWrt firewall settings for neither ```wan``` nor ```lan```): |
|
|
|
|
|
|
|
```text |
|
|
|
config zone |
|
|
|
option name 'vpnclient' |
|
|
|
option network 'vpnclient' |
|
|
|
option input 'REJECT' |
|
|
|
option forward 'ACCEPT' |
|
|
|
option output 'REJECT' |
|
|
|
option masq '1' |
|
|
|
option mtu_fix '1' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'lan' |
|
|
|
option dest 'vpnclient' |
|
|
|
|
|
|
|
config zone |
|
|
|
option name 'vpnserver' |
|
|
|
option network 'vpnserver' |
|
|
|
option input 'ACCEPT' |
|
|
|
option forward 'REJECT' |
|
|
|
option output 'ACCEPT' |
|
|
|
option masq '1' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'vpnserver' |
|
|
|
option dest 'wan' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'vpnserver' |
|
|
|
option dest 'lan' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'vpnserver' |
|
|
|
option dest 'vpnclient' |
|
|
|
|
|
|
|
config rule |
|
|
|
option name 'Allow-OpenVPN-Inbound' |
|
|
|
option target 'ACCEPT' |
|
|
|
option src '*' |
|
|
|
option proto 'tcp' |
|
|
|
option dest_port '1194' |
|
|
|
``` |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/openvpn```: |
|
|
|
|
|
|
|
```text |
|
|
|
config openvpn 'vpnclient' |
|
|
|
option client '1' |
|
|
|
option dev_type 'tun' |
|
|
|
option dev 'ovpnc0' |
|
|
|
option proto 'udp' |
|
|
|
option remote 'some.domain.com 1197' # DO NOT USE PORT 1194 for VPN Client |
|
|
|
... |
|
|
|
|
|
|
|
config openvpn 'vpnserver' |
|
|
|
option port '1194' |
|
|
|
option proto 'tcp' |
|
|
|
option server '192.168.200.0 255.255.255.0' |
|
|
|
... |
|
|
|
``` |
|
|
|
|
|
|
|
#### Local OpenVPN Server + OpenVPN Client (Scenario 2) |
|
|
|
|
|
|
|
If the OpenVPN client is **not** used as default routing and you create policies to selectively use the OpenVPN client, make sure your settings are as following (three dots on the line imply other options can be listed in the section as well). |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/vpn-policy-routing```: |
|
|
|
|
|
|
|
```text |
|
|
|
config vpn-policy-routing 'config' |
|
|
|
list ignored_interface 'vpnserver' |
|
|
|
option append_src_rules '! -d 192.168.200.0/24' |
|
|
|
... |
|
|
|
``` |
|
|
|
|
|
|
|
The network/firewall/openvpn settings are below. |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/network``` (**DO NOT** modify default OpenWrt network settings for neither ```wan``` nor ```lan```): |
|
|
|
|
|
|
|
```text |
|
|
|
config interface 'vpnclient' |
|
|
|
option proto 'none' |
|
|
|
option ifname 'ovpnc0' |
|
|
|
|
|
|
|
config interface 'vpnserver' |
|
|
|
option proto 'none' |
|
|
|
option ifname 'ovpns0' |
|
|
|
option auto '1' |
|
|
|
``` |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/firewall``` (**DO NOT** modify default OpenWrt firewall settings for neither ```wan``` nor ```lan```): |
|
|
|
|
|
|
|
```text |
|
|
|
config zone |
|
|
|
option name 'vpnclient' |
|
|
|
option network 'vpnclient' |
|
|
|
option input 'REJECT' |
|
|
|
option forward 'ACCEPT' |
|
|
|
option output 'REJECT' |
|
|
|
option masq '1' |
|
|
|
option mtu_fix '1' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'lan' |
|
|
|
option dest 'vpnclient' |
|
|
|
|
|
|
|
config zone |
|
|
|
option name 'vpnserver' |
|
|
|
option network 'vpnserver' |
|
|
|
option input 'ACCEPT' |
|
|
|
option forward 'REJECT' |
|
|
|
option output 'ACCEPT' |
|
|
|
option masq '1' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'vpnserver' |
|
|
|
option dest 'wan' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'vpnserver' |
|
|
|
option dest 'lan' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'vpnserver' |
|
|
|
option dest 'vpnclient' |
|
|
|
|
|
|
|
config rule |
|
|
|
option name 'Allow-OpenVPN-Inbound' |
|
|
|
option target 'ACCEPT' |
|
|
|
option src '*' |
|
|
|
option proto 'tcp' |
|
|
|
option dest_port '1194' |
|
|
|
``` |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/openvpn```: |
|
|
|
|
|
|
|
```text |
|
|
|
config openvpn 'vpnclient' |
|
|
|
option client '1' |
|
|
|
option dev_type 'tun' |
|
|
|
option dev 'ovpnc0' |
|
|
|
option proto 'udp' |
|
|
|
option remote 'some.domain.com 1197' # DO NOT USE PORT 1194 for VPN Client |
|
|
|
list pull_filter 'ignore "redirect-gateway"' # for OpenVPN 2.4 and later |
|
|
|
option route_nopull '1' # for OpenVPN earlier than 2.4 |
|
|
|
... |
|
|
|
|
|
|
|
config openvpn 'vpnserver' |
|
|
|
option port '1194' |
|
|
|
option proto 'tcp' |
|
|
|
option server '192.168.200.0 255.255.255.0' |
|
|
|
... |
|
|
|
``` |
|
|
|
|
|
|
|
#### Local Wireguard Server + Wireguard Client (Scenario 1) |
|
|
|
|
|
|
|
Yes, I'm aware that technically there are no clients nor servers in Wireguard, it's all peers, but for the sake of README readability I will use the terminology similar to the OpenVPN Server + Client setups. |
|
|
|
|
|
|
|
If the Wireguard tunnel on your router is used as default routing (for the whole internet), make sure your settings are as following (three dots on the line imply other options can be listed in the section as well). |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/vpn-policy-routing```: |
|
|
|
|
|
|
|
```text |
|
|
|
config vpn-policy-routing 'config' |
|
|
|
list ignored_interface 'wgserver' |
|
|
|
... |
|
|
|
|
|
|
|
config policy |
|
|
|
option name 'Wireguard Server' |
|
|
|
option interface 'wan' |
|
|
|
option proto 'tcp' |
|
|
|
option src_port '61820' |
|
|
|
option chain 'OUTPUT' |
|
|
|
``` |
|
|
|
|
|
|
|
The recommended network/firewall settings are below. |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/network``` (**DO NOT** modify default OpenWrt network settings for neither ```wan``` nor ```lan```): |
|
|
|
|
|
|
|
```text |
|
|
|
config interface 'wgclient' |
|
|
|
option proto 'wireguard' |
|
|
|
... |
|
|
|
|
|
|
|
config wireguard_wgclient |
|
|
|
list allowed_ips '0.0.0.0/0' |
|
|
|
list allowed_ips '::0/0' |
|
|
|
option endpoint_port '51820' |
|
|
|
option route_allowed_ips '1' |
|
|
|
... |
|
|
|
|
|
|
|
config interface 'wgserver' |
|
|
|
option proto 'wireguard' |
|
|
|
option listen_port '61820' |
|
|
|
list addresses '192.168.200.1' |
|
|
|
... |
|
|
|
|
|
|
|
config wireguard_wgserver |
|
|
|
list allowed_ips '192.168.200.2/32' |
|
|
|
option route_allowed_ips '1' |
|
|
|
... |
|
|
|
``` |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/firewall``` (**DO NOT** modify default OpenWrt firewall settings for neither ```wan``` nor ```lan```): |
|
|
|
|
|
|
|
```text |
|
|
|
config zone |
|
|
|
option name 'wgclient' |
|
|
|
option network 'wgclient' |
|
|
|
option input 'REJECT' |
|
|
|
option forward 'ACCEPT' |
|
|
|
option output 'REJECT' |
|
|
|
option masq '1' |
|
|
|
option mtu_fix '1' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'lan' |
|
|
|
option dest 'wgclient' |
|
|
|
|
|
|
|
config zone |
|
|
|
option name 'wgserver' |
|
|
|
option network 'wgserver' |
|
|
|
option input 'ACCEPT' |
|
|
|
option forward 'REJECT' |
|
|
|
option output 'ACCEPT' |
|
|
|
option masq '1' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'wgserver' |
|
|
|
option dest 'wan' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'wgserver' |
|
|
|
option dest 'lan' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'wgserver' |
|
|
|
option dest 'wgclient' |
|
|
|
|
|
|
|
config rule |
|
|
|
option name 'Allow-WG-Inbound' |
|
|
|
option target 'ACCEPT' |
|
|
|
option src '*' |
|
|
|
option proto 'udp' |
|
|
|
option dest_port '61820' |
|
|
|
``` |
|
|
|
|
|
|
|
#### Local Wireguard Server + Wireguard Client (Scenario 2) |
|
|
|
|
|
|
|
Yes, I'm aware that technically there are no clients nor servers in Wireguard, it's all peers, but for the sake of README readability I will use the terminology similar to the OpenVPN Server + Client setups. |
|
|
|
|
|
|
|
If the Wireguard client is **not** used as default routing and you create policies to selectively use the Wireguard client, make sure your settings are as following (three dots on the line imply other options can be listed in the section as well). |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/vpn-policy-routing```: |
|
|
|
|
|
|
|
```text |
|
|
|
config vpn-policy-routing 'config' |
|
|
|
list ignored_interface 'wgserver' |
|
|
|
option append_src_rules '! -d 192.168.200.0/24' |
|
|
|
... |
|
|
|
``` |
|
|
|
|
|
|
|
The recommended network/firewall settings are below. |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/network``` (**DO NOT** modify default OpenWrt network settings for neither ```wan``` nor ```lan```): |
|
|
|
|
|
|
|
```text |
|
|
|
config interface 'wgclient' |
|
|
|
option proto 'wireguard' |
|
|
|
... |
|
|
|
|
|
|
|
config wireguard_wgclient |
|
|
|
list allowed_ips '0.0.0.0/0' |
|
|
|
list allowed_ips '::0/0' |
|
|
|
option endpoint_port '51820' |
|
|
|
... |
|
|
|
|
|
|
|
config interface 'wgserver' |
|
|
|
option proto 'wireguard' |
|
|
|
option listen_port '61820' |
|
|
|
list addresses '192.168.200.1/24' |
|
|
|
... |
|
|
|
|
|
|
|
config wireguard_wgserver |
|
|
|
list allowed_ips '192.168.200.2/32' |
|
|
|
option route_allowed_ips '1' |
|
|
|
... |
|
|
|
``` |
|
|
|
|
|
|
|
Relevant part of ```/etc/config/firewall``` (**DO NOT** modify default OpenWrt firewall settings for neither ```wan``` nor ```lan```): |
|
|
|
|
|
|
|
```text |
|
|
|
config zone |
|
|
|
option name 'wgclient' |
|
|
|
option network 'wgclient' |
|
|
|
option input 'REJECT' |
|
|
|
option forward 'ACCEPT' |
|
|
|
option output 'REJECT' |
|
|
|
option masq '1' |
|
|
|
option mtu_fix '1' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'lan' |
|
|
|
option dest 'wgclient' |
|
|
|
|
|
|
|
config zone |
|
|
|
option name 'wgserver' |
|
|
|
option network 'wgserver' |
|
|
|
option input 'ACCEPT' |
|
|
|
option forward 'REJECT' |
|
|
|
option output 'ACCEPT' |
|
|
|
option masq '1' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'wgserver' |
|
|
|
option dest 'wan' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'wgserver' |
|
|
|
option dest 'lan' |
|
|
|
|
|
|
|
config forwarding |
|
|
|
option src 'wgserver' |
|
|
|
option dest 'wgclient' |
|
|
|
|
|
|
|
config rule |
|
|
|
option name 'Allow-WG-Inbound' |
|
|
|
option target 'ACCEPT' |
|
|
|
option src '*' |
|
|
|
option proto 'udp' |
|
|
|
option dest_port '61820' |
|
|
|
``` |
|
|
|
|
|
|
|
#### Netflix Domains |
|
|
|
|
|
|
|
The following policy should route US Netflix traffic via WAN. For capturing international Netflix domain names, you can refer to [these getdomainnames.sh-specific instructions](https://github.com/Xentrk/netflix-vpn-bypass#ipset_netflix_domainssh) and don't forget to adjust them for OpenWrt. This may not work if Netflix changes things. For more reliable US Netflix routing you may want to consider using [custom user files](#custom-user-files). |
|
|
|
|
|
|
|
```text |
|
|
|
config policy |
|
|
|
option name 'Netflix Domains' |
|
|
|
option interface 'wan' |
|
|
|
option dest_addr 'amazonaws.com netflix.com nflxext.com nflximg.net nflxso.net nflxvideo.net dvd.netflix.com' |
|
|
|
``` |
|
|
|
|
|
|
|
#### Example Includes |
|
|
|
|
|
|
|
```text |
|
|
|
config include |
|
|
|
option path '/etc/vpn-policy-routing.netflix.user' |
|
|
|
|
|
|
|
config include |
|
|
|
option path '/etc/vpn-policy-routing.aws.user' |
|
|
|
``` |
|
|
|
|
|
|
|
## Footnotes/Known Issues |
|
|
|
|
|
|
|
1. <a name="footnote1"> </a> See [note about multiple OpenVPN clients](#multiple-openvpn-clients). |
|
|
|
|
|
|
|
2. <a name="footnote2"> </a> If your ```OpenVPN``` interface has the device name different from tun\* or tap\*, is not up and is not explicitly listed in ```supported_interface``` option, it may not be available in the policies ```Interface``` drop-down within WebUI. |
|
|
|
|
|
|
|
3. <a name="footnote3"> </a> If your default routing is set to the VPN tunnel, then the true WAN interface cannot be discovered using OpenWrt built-in functions, so service will assume your network interface ending with or starting with ```wan``` is the true WAN interface. |
|
|
|
|
|
|
|
4. <a name="footnote4"> </a> The service does **NOT** support the "killswitch" router mode (where if you stop the VPN tunnel, you have no internet connection). For proper operation, leave all the default OpenWrt ```network``` and ```firewall``` settings for ```lan``` and ```wan``` intact. |
|
|
|
|
|
|
|
5. <a name="footnote5"> </a> When using the ```dnsmasq.ipset``` option, please make sure to flush the DNS cache of the local devices, otherwise domain policies may not work until you do. If you're not sure how to flush the DNS cache (or if the device/OS doesn't offer an option to flush its DNS cache), reboot your local devices when starting to use the service and/or when connecting data-capable device to your WiFi. |
|
|
|
|
|
|
|
### Multiple OpenVPN Clients |
|
|
|
|
|
|
|
If you use multiple OpenVPN clients on your router, the order in which their devices are named (tun0, tun1, etc) is not guaranteed by OpenWrt/LEDE Project. The following settings are recommended in this case. |
|
|
|
|
|
|
|
For ```/etc/config/network```: |
|
|
|
|
|
|
|
```text |
|
|
|
config interface 'vpnclient0' |
|
|
|
option proto 'none' |
|
|
|
option ifname 'ovpnc0' |
|
|
|
|
|
|
|
config interface 'vpnclient1' |
|
|
|
option proto 'none' |
|
|
|
option ifname 'ovpnc1' |
|
|
|
``` |
|
|
|
|
|
|
|
For ```/etc/config/openvpn```: |
|
|
|
|
|
|
|
```text |
|
|
|
config openvpn 'vpnclient0' |
|
|
|
option client '1' |
|
|
|
option dev_type 'tun' |
|
|
|
option dev 'ovpnc0' |
|
|
|
... |
|
|
|
|
|
|
|
config openvpn 'vpnclient1' |
|
|
|
option client '1' |
|
|
|
option dev_type 'tun' |
|
|
|
option dev 'ovpnc1' |
|
|
|
... |
|
|
|
``` |
|
|
|
|
|
|
|
For ```/etc/config/vpn-policy-routing```: |
|
|
|
|
|
|
|
```text |
|
|
|
config vpn-policy-routing 'config' |
|
|
|
list supported_interface 'vpnclient0 vpnclient1' |
|
|
|
... |
|
|
|
``` |
|
|
|
|
|
|
|
### A Word About Default Routing |
|
|
|
|
|
|
|
Service does not alter the default routing. Depending on your VPN tunnel settings (and settings of the VPN server you are connecting to), the default routing might be set to go via WAN or via VPN tunnel. This service affects only routing of the traffic matching the policies. If you want to override default routing, set the following: |
|
|
|
|
|
|
|
- For OpenVPN 2.4 and newer client config: |
|
|
|
|
|
|
|
```text |
|
|
|
list pull_filter 'ignore "redirect-gateway"' |
|
|
|
``` |
|
|
|
|
|
|
|
- For OpenVPN 2.3 and older client config: |
|
|
|
|
|
|
|
```text |
|
|
|
option route_nopull '1' |
|
|
|
``` |
|
|
|
|
|
|
|
- For your Wireguard (client) config: |
|
|
|
|
|
|
|
```text |
|
|
|
option route_allowed_ips '0' |
|
|
|
``` |
|
|
|
|
|
|
|
- Routing Wireguard traffic requires setting `rp_filter = 2`. Please refer to [issue #41](https://github.com/stangri/openwrt_packages/issues/41) for more details. |
|
|
|
|
|
|
|
### A Word About HTTP/3 (QUICK) |
|
|
|
|
|
|
|
If you want to target traffic using HTTP/3 protocol, you can use the ```AUTO``` as the protocol (the policy will be either protocol-agnostic or ```TCP/UDP```) or explicitly use ```UDP``` as a protocol. |
|
|
|
|
|
|
|
### A Word About DNS-over-HTTPS |
|
|
|
|
|
|
|
Some browsers, like [Mozilla Firefox](https://support.mozilla.org/en-US/kb/firefox-dns-over-https#w_about-dns-over-https) or [Google Chrome/Chromium](https://blog.chromium.org/2019/09/experimenting-with-same-provider-dns.html) have [DNS-over-HTTPS proxy](https://en.wikipedia.org/wiki/DNS_over_HTTPS) built-in. Their requests to web-sites cannot be affected if the ```dnsmasq.ipset``` is set for the ```dest_ipset``` option. To fix this, you can try either of the following: |
|
|
|
|
|
|
|
1. Disable the DNS-over-HTTPS support in your browser and use the OpenWrt's [net/https-dns-proxy](https://github.com/openwrt/packages/tree/master/net/https-dns-proxy) package and set it up either [manually](https://openwrt.org/docs/guide-user/services/dns/doh_dnsmasq_https-dns-proxy?s[]=https&s[]=dns&s[]=proxy) or auto-magically with [https-dns-proxy luci app](https://github.com/openwrt/luci/tree/master/applications/luci-app-https_dns_proxy). You can then continue to use ```dnsmasq.ipset``` setting for the ```dest_ipset``` in VPN Policy Routing. |
|
|
|
|
|
|
|
2. Continue using DNS-over-HTTPS in your browser (which, by the way, also limits your options for router-level AdBlocking as described [in ```dnsmasq.ipset``` option description here](https://github.com/openwrt/packages/tree/master/net/simple-adblock/files#dns-resolution-option)), you than would either have to disable the ```dest_ipset``` or switch it to ```ipset```. Please note, you will lose all the benefits of [```dnsmasq.ipset```](#use-dnsmasq-ipset) option. |
|
|
|
|
|
|
|
### A Word About Cloudflare's 1.1.1.1 App |
|
|
|
|
|
|
|
Cloudflare has released an app for [iOS](https://itunes.apple.com/us/app/1-1-1-1-faster-internet/id1423538627) and [Android](https://play.google.com/store/apps/details?id=com.cloudflare.onedotonedotonedotone), which can also be configured to route traffic thru their own VPN tunnel (WARP+). |
|
|
|
|
|
|
|
If you use Cloudlfare's VPN tunnel (WARP+), none of the policies you set up with the VPN Policy Routing will take effect on your mobile device. Disable WARP+ for your home WiFi to keep VPN Policy Routing affecting your mobile device. |
|
|
|
|
|
|
|
If you just use the private DNS queries (WARP), [A Word About DNS-over-HTTPS](#a-word-about-DNS-over-HTTPS) applies. You can also disable WARP for your home WiFi to keep VPN Policy Routing affecting your mobile device. |
|
|
|
|
|
|
|
## Discussion |
|
|
|
|
|
|
|
Please head to [OpenWrt Forum](https://forum.openwrt.org/t/vpn-policy-based-routing-web-ui-discussion/10389) for discussions of this service. |
|
|
|
|
|
|
|
## Getting Help |
|
|
|
|
|
|
|
If things are not working as intended, please include the following in your post: |
|
|
|
|
|
|
|
- content of ```/etc/config/dhcp``` |
|
|
|
- content of ```/etc/config/firewall``` |
|
|
|
- content of ```/etc/config/network``` |
|
|
|
- content of ```/etc/config/vpn-policy-routing``` |
|
|
|
- the output of ```/etc/init.d/vpn-policy-routing support``` |
|
|
|
- the output of ```/etc/init.d/vpn-policy-routing reload``` with verbosity setting set to 2 |
|
|
|
|
|
|
|
If you don't want to post the ```/etc/init.d/vpn-policy-routing support``` output in a public forum, there's a way to have the support details automatically uploaded to my account at paste.ee by running: ```/etc/init.d/vpn-policy-routing support -p```. You need to have the following packages installed to enable paste.ee upload functionality: ```curl libopenssl ca-bundle```. |
|
|
|
|
|
|
|
WARNING: while paste.ee uploads are unlisted/not indexed at the web-site, they are still publicly available. |
|
|
|
|
|
|
|
## Thanks |
|
|
|
|
|
|
|
I'd like to thank everyone who helped create, test and troubleshoot this service. Without contributions from [@hnyman](https://github.com/hnyman), [@dibdot](https://github.com/dibdot), [@danrl](https://github.com/danrl), [@tohojo](https://github.com/tohojo), [@cybrnook](https://github.com/cybrnook), [@nidstigator](https://github.com/nidstigator), [@AndreBL](https://github.com/AndreBL) and [@dz0ny](https://github.com/dz0ny) and rigorous testing/bugreporting by [@dziny](https://github.com/dziny), [@bluenote73](https://github.com/bluenote73), [@buckaroo](https://github.com/pgera), [@Alexander-r](https://github.com/Alexander-r), [n8v8R](https://github.com/n8v8R) and [psherman](https://forum.openwrt.org/u/psherman) it wouldn't have been possible. Wireguard/IPv6 support is courtesy of [Mullvad](https://www.mullvad.net), [IVPN](https://www.ivpn.net/) and [WireVPN](https://www.wirevpn.net). |
Hannu Nyman
5 years ago
GitHub