openwrt-packages-dist/net/coova-chilli/files/chilli.config

#
# Sample Coova-Chilli configuration file
#

config chilli
    # disable to running chilli. remove this option before running.
    option disabled 1

    # name of TUN device name. required.
    option tundev 'tun0'

    # name of network interface
    option network ''

    # Include this flag to include debug information.
    #option debug 1

    # Re-read configuration file at this interval. Will also cause new domain
    # name lookups to be performed. Value is given in seconds.
    #option interval 3600

    # Directory to use for nonvolatile storage.
    # The program must have write access to this directory.
    # this option is currently ignored
    #option statedir ./


    # TUN parameters

    # IP network address of external packet data network
    # Used to allocate dynamic IP addresses and set up routing.
    # Normally you do not need to uncomment this option.
    #option net 192.168.182.0/24

    # Dynamic IP address pool
    # Used to allocate dynamic IP addresses to clients.
    # If not set it defaults to the net tag.
    # Do not uncomment this option unless you are an experienced user!
    #option dynip 192.168.182.0/24

    # Static IP address pool
    # Used to allocate static IP addresses to clients.
    # Do not uncomment this option unless you are an experienced user!
    #option statip 192.168.182.0/24


    # Primary DNS server.
    # Will be suggested to the client.
    # If omitted the system default will be used.
    # Normally you do not need to uncomment this option.
    #option dns1 172.16.0.5

    # Secondary DNS server.
    # Will be suggested to the client.
    # If omitted the system default will be used.
    # Normally you do not need to uncomment this option.
    #option dns2 172.16.0.6

    # Domain name
    # Will be suggested to the client.
    # Normally you do not need to uncomment this option.
    #option domain key.chillispot.org

    # Script executed after network interface has been brought up.
    # Executed with the following parameters: <devicename> <ip address>
    # <mask>
    # Normally you do not need to modify this option.
    option ipup /etc/chilli/up.sh

    # Script executed after network interface has been taken down.
    # Executed with the following parameters: <devicename> <ip address>
    # <mask>
    # Normally you do not need to modify this option.
    option ipdown /etc/chilli/down.sh


    # Radius parameters

    # IP address to listen to
    # Normally you do not need to uncomment this option.
    #option radiuslisten 127.0.0.1

    # IP address of radius server 1
    # For most installations you need to modify this option.
    option radiusserver1 rad01.chillispot.org

    # IP address of radius server 2
    # If you have only one radius server you should set radiusserver2 to the
    # same value as radiusserver1.
    # For most installations you need to modify this option.
    option radiusserver2 rad02.chillispot.org

    # Radius authentication port
    # The UDP port number to use for radius authentication requests.
    # The same port number is used for both radiusserver1 and radiusserver2.
    # Normally you do not need to uncomment this option.
    #option radiusauthport 1812

    # Radius accounting port
    # The UDP port number to use for radius accounting requests.
    # The same port number is used for both radiusserver1 and radiusserver2.
    # Normally you do not need to uncomment this option.
    #option radiusacctport 1813

    # Radius shared secret for both servers
    # For all installations you should modify this option.
    #option radiussecret testing123

    # Radius NAS-Identifier
    # Normally you do not need to uncomment this option.
    #option radiusnasid nas01

    # WISPr Location ID. Should be in the format: isocc=<ISO_Country_Code>,
    # cc=<E.164_Country_Code>,ac=<E.164_Area_Code>,network=<ssid/ZONE>
    # Normally you do not need to uncomment this option.
    #option radiuslocationid isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport

    # WISPr Location Name. Should be in the format:
    # <HOTSPOT_OPERATOR_NAME>,<LOCATION>
    # Normally you do not need to uncomment this option.
    #option radiuslocationname ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport


    # Radius proxy parameters

    # IP address to listen to
    # Normally you do not need to uncomment this option.
    #option proxylisten 10.0.0.1

    # UDP port to listen to.
    # If not specified a port will be selected by the system
    # Normally you do not need to uncomment this option.
    #option proxyport 1645

    # Client(s) from which we accept radius requests
    # Normally you do not need to uncomment this option.
    #option proxyclient 10.0.0.1/24

    # Radius proxy shared secret for all clients
    # If not specified defaults to radiussecret
    # Normally you do not need to uncomment this option.
    #option proxysecret testing123


    # DHCP Parameters

    # Ethernet interface to listen to.
    # This is the network interface which is connected to the access points.
    # In a typical configuration this option should be set to eth1.
    option dhcpif eth1

    # Use specified MAC address.
    # An address in the range  00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls
    # within the IANA range of addresses and is not allocated for other
    # purposes.
    # Normally you do not need to uncomment this option.
    #option dhcpmac 00:00:5E:00:02:00

    # Time before DHCP lease expires
    # Normally you do not need to uncomment this option.
    #option lease 600


    # Universal access method (UAM) parameters

    # URL of web server handling authentication.
    option uamserver https://radius.chillispot.org/hotspotlogin

    # URL of welcome homepage.
    # Unauthenticated users will be redirected to this URL. If not specified
    # users will be redirected to the uamserver instead.
    # Normally you do not need to uncomment this option.
    #option uamhomepage http://192.168.182.1/welcome.html

    # Shared between chilli and authentication web server
    #option uamsecret ht2eb8ej6s4et3rg1ulp

    # IP address to listen to for authentication requests
    # Do not uncomment this option unless you are an experienced user!
    #option uamlisten 192.168.182.1

    # TCP port to listen to for authentication requests
    # Do not uncomment this option unless you are an experienced user!
    #option uamport 3990

    # Comma separated list of domain names, IP addresses or network segments
    # the client can access without first authenticating.
    # It is possible to specify this option multiple times.
    # Normally you do not need to uncomment this option.
    #option uamallowed www.chillispot.org,10.11.12.0/24

    # Comma separated list of domain names
    # the client can access without first authenticating.
    # It is possible to specify this option multiple times.
    # Normally you do not need to uncomment this option.
    #option uamdomain .chillispot.org,.coova.org

    # If this flag is given unauthenticated users are allowed to use
    # any DNS server.
    # Normally you do not need to uncomment this option.
    #option uamanydns


    # MAC authentication

    # If this flag is given users will be authenticated only on their MAC
    # address.
    # Normally you do not need to uncomment this option.
    #option macauth

    # List of MAC addresses.
    # The MAC addresses specified in this list will be authenticated only on
    # their MAC address.
    # this option is ignored if the macauth tag is given.
    # It is possible to specify this option multiple times.
    # Normally you do not need to uncomment this option.
    #option macallowed 00-0A-5E-AC-BE-51,00-30-1B-3C-32-E9

    # Password to use for MAC authentication.
    # Normally you do not need to uncomment this option.
    #option macpasswd password

    # Suffix to add to MAC address in order to form the username.
    # Normally you do not need to uncomment this option.
    #option macsuffix suffix