- config options 'tgt'
- # iothreads limits number of worker threads per rdwr target, default is 16
- # which seems to be too much for an avarage router
- option iothreads '2'
- # option nop_count '3'
- # option nop_interval '1'
- # list portal '[::1]'
- # list portal '127.0.0.1:3261'
- # list portal '0.0.0.0:3262'
- # list portal '[::]:3263'
-
- config target 1
- option name 'iqn.2012-06.org.openwrt:target1'
- # list allow_name 'iqn.1994-05.org.example:fedcba987654'
- # list allow_address '192.168.2.128/27'
-
- #config target 2
- # option name 'iqn.2012-06.org.openwrt:t2'
-
- # all options are set to default, except for the device
- # lun "name" is constructed as TGTID_LUN
- #config lun 1_1
- # option 'device' '/dev/sda'
- # type of scsi device. available options: disk, cd, pt (sg passthrough)
- # option 'type' 'disk'
- # backing store access method: rdwr (read-write), aio (async IO), sg (for pt type only, device must be /dev/sgN)
- # option 'bstype' 'aio'
- # set sync and/or direct flags when opening device, affect only rdwr
- # option 'sync' '0'
- # option 'direct' '0'
- # block size for lun, default is 512
- # option 'blocksize' 4096
- # override SCSI mode page, see tgtadm man page for details
- # option 'mode_page' 'string'
- # vendor, product, revision, SCSI ID and SCSI Serial number
- # option 'vendor_id' 'string'
- # option 'product_id' 'string'
- # option 'product_rev' 'string'
- # option 'scsi_id' 'string'
- # option 'scsi_sn' 'string'
- # refuse write attempts. applies only to disk type
- # option 'readonly' '0'
- # Disk devices default to non-removable, cd - to removable
- # option 'removable' '0'
- # 0 = Classic sense format, 1 = Support descriptor format.
- # option 'sense_format' '0'
- # Rotaion rate: 0: not reported, 1: non-rotational medium (SSD), 2-1024: reserverd, 1025+: "Nominal rotation rate"
- # option 'rotation_rate' '0'
-
- #config lun 2_1
- # option device /mnt/iscsi.img
-
- #config lun 2_2
- # option device /dev/sdc
-
- #config account
- # list target 1
- # list target 2
- # option user "username1"
- # option password "pass1"
-
- #config account
- # option target 2
- # option user "user2"
- # option password "pwd2"
- # option outgoing 1
|
